Meadows & Passmore Clockmakers Supplies

AMERICAN STYLE STRIKING MOVEMENT Model C
Part no.0539 000415

AMERICAN STYLE STRIKING MOVEMENT Model C

Cataloge chapter: Movements & Kits
Section: AMERICAN REPRODUCTION MOVEMENTS
AMERICAN MOVEMENTS, MOVEMENTS
Type: Time and Strike, Shaft to bottom of bob: 250mm, Escapement position: Front, Front plate to shaft tip: 27mm, Plate width: 92mm, Plate height: 135mm, Overal width inc wheels: 150mm, Overall height inc wheels: 150mm, Distance between winding shaft centres: 80mm, Gap between plates: 35mm, Mounted onto back of case or on dial support: Back, Horizontal gap between shaft & arbor centres: 33mm, Suitable 8 day bob part no: 0233 030015. 
Excellent reproductions of 19th century movements. All brass/steel construction.
Please note that as a typical American movement, you may need to make minor adjustments to the numerous striking wires, triggers etc when the movement has been fitted. It is often necessary to adjust the count wheel and the fly on these units as they are easily put out of adjustment in transit.
These movements are manufactured in Asia, and we have great difficulty obtaining stock of consistent specifications. We do spot checks on the stock arriving, but cannot guarantee that movements supplied will be exactly as described. However they are excellent value and with a little adjustment they make very authentic replacements for worn-out American movements. Key, 8 day pendulum bob and suspension not included (unless specified).
You may require:
3.75mm key 0333 037518, 8 day bob 0233 030015, Suspension 0239 000115


You can buy this product from our Online Store at www.medmaw.com.

This product belongs to the following groups American movements | Mechanical movements |


We have an extensive range of clock parts and related products, please view the list of Categories and families here.
You can view and download our regularly updated online Catalogue here.

Last Updated: July,2017

©2005 M&P, All rights reserved.

Valid HTML 4.01 Transitional

Valid CSS!