M&P: Clockmakers Supplies        
Enter the word you want to search for:

Exact Match Search
Home
Home
Store
Store
Catalogue
Catalogue
Index
Index

M&P Clock parts: Pendulums for Longcase (Grandfather) clocks

You may be interested in these associated pages:
Suspensions for English clocks | Clock weights | Clock pulleys | Crank keys |

You can see these specific products listed in our Online Store at www.medmaw.com.



LONGCASE PENDULUMS
(Longcase pendulums, Pendulums, Invar rods, Rods)

LONGCASE PENDULUM MILD STEEL 32 inch LONGCASE PENDULUM MILD STEEL 32 inch (0272 000115) Mild steel rod 32inch. 3.12mm (1/8inch) diameter. 1/8inch whitworth thread at both ends. Please note: Due to difficulties packing and posting this item within Royal Mail's restrictions, this item is now sent via carrier. This will be reflected in the postage fee.

LONGCASE PENDULUM INVAR LONGCASE PENDULUM INVAR (0272 000215) Invar rod 33inch. 3.12mm (1/8inch) diameter. 1/8inch whitworth thread at both ends. Please note: Due to difficulties packing and posting this item within Royal Mail's restrictions, this item is now sent via carrier. This will be reflected in the postage fee.

LONGCASE PENDULUM MILD STEEL 33inch LONGCASE PENDULUM MILD STEEL 33inch (0272 000315) Mild steel rod 33inch. 3.12mm (1/8inch) diameter. 1/8inch whitworth thread at both ends. Please note: Due to difficulties packing and posting this item within Royal Mail's restrictions, this item is now sent via carrier. This will be reflected in the postage fee.

INVAR ROD for regulators. 6mm INVAR ROD for regulators. 6mm (0991 000615) Invar steel pendulum rods for regulators. Minimal co-effiecient of expansion, details supplied, batch dependent. Diameter: 6mm. Length: 1270mm. Unthreaded. This item exceeds the maximum acceptable length for overseas postage. Also used in Telecoms for temperature stable antenna brackets etc.


FLAT AND NUT FOR LONGCASE
(Flat & nut, Longcase flat & nut)

FLAT AND NUT FOR LONGCASE FLAT AND NUT FOR LONGCASE (0273 000115) 1/8inch whitworth hole in the top. This screws to the lower end of the pendulum rod. The bob slides up and down this part, according to the position of the regulating nut.


LONGCASE BOBS
(Longcase bobs, Pendulums)

LEAD BOB FOR LONGCASE LEAD BOB FOR LONGCASE (0274 000115) Diameter: 120mm.

BRASS FACED LEAD BOB FOR LONGCASE BRASS FACED LEAD BOB FOR LONGCASE (0515 000115) Diameter: 100 mm.


BRASS RATING NUTS
(Rating nuts, Nuts)

BRASS RATING NUTS BRASS RATING NUTS (0721 001215) 1/2inch square brass. Pilot hole provided for tapping with the appropriate thread. Packs of 3.


We have more products, please view the list of Categories
You may be interested in these associated pages:
Suspensions for English clocks | Clock weights | Clock pulleys | Crank keys |

You can see these specific products listed in our Online Store at www.medmaw.com.




Click a link to find out more information about any product.
Home
Home
Store
Store
Catalogue
Catalogue
Index
Index


         

©2005 M&P, All rights reserved.

Valid HTML 4.01 Transitional