Clockmakers Supplies Index

Below you can find an index of most of the clockmakers supplies that we sell listed by category. Click the links to find out more information about each product.

Driving Force

LONGCASE LEAD CLOCK WEIGHTS
For English clocks. Diameter 64mm. (Longcase weights, Lead weights, Weights)
LONGCASE LEAD CLOCK WEIGHT 4.5kg Height 150mm.
LONGCASE LEAD CLOCK WEIGHT 5.5kg Height 190mm.
LONGCASE LEAD CLOCK WEIGHT 6.4kg Height 215mm.

WEIGHT HOOKS
(Weight hooks &amp; rings, Hooks)
'S' CLOCK WEIGHT HOOKS Solid brass. For weights up to 6.5kg. Length 32mm. Width 18mm. Wire diameter 3mm.

COUNTERWEIGHTS
(Counterweight, Doughnut counterweight)
DOUGHNUT (DONUT) 30 HOUR CLOCK COUNTERWEIGHT 140g For rope &amp; chain clocks. 1 3/4" outside diameter. 3/4" internal diameter.

CAST IRON OG WEIGHTS FOR AMERICAN CLOCKS
Available in 30 hour &amp; 8 day sizes. (O.G. Weights, Weights)
30 HOUR AMERICAN 'OG' WEIGHT 1.45kg Many American OG clocks had a slightly lighter weight on the strike side. These suit either train. Base diameter 60mm. Top diameter 45mm. Height 95mm. Inset hook.
8 DAY AMERICAN 'OG' WEIGHT 3.4kg There is a groove down one side. 83mm x 50mm. 120mm high excluding hook.

VIENNA CLOCK WEIGHTS
Polished brass. (Vienna weights, Weights, Brass weights)
VIENNA CLOCK WEIGHT Polished brass. Lead filled. 2 3/4 lbs. 1 1/2" diameter. Height excluding hook 4 1/2".
REPLACEMENT VIENNA CLOCK WEIGHT HOOK Polished brass. High quality.

CUCKOO CLOCK WEIGHTS
Cast iron 'Fir Cone' style. Length includes hook. Also suitable for Black Forest clocks. (Cuckoo weights, Fir cone weights, Black Forest weights)
CUCKOO CLOCK WEIGHT 275g Length 115mm. Diameter 27mm.
CUCKOO CLOCK WEIGHT 375g Length 130mm. Diameter 28mm.
CUCKOO CLOCK WEIGHT 500g Length 140mm. Diameter 32mm.
CUCKOO CLOCK WEIGHT 750g Length 170mm. Diameter 38mm.
CUCKOO CLOCK WEIGHT 1000g Length 195mm. Diameter 40mm.
CUCKOO CLOCK WEIGHT 1260g Length 200mm. Diameter 43mm.
CUCKOO CLOCK WEIGHT 1500g Length 205mm. Diameter 45mm.
CUCKOO CLOCK WEIGHT 1750g Length 215mm. Diameter 48mm.
CUCKOO CLOCK WEIGHT 2100g Length 215mm. Diameter 52mm.

CLOCK WEIGHT HOOKS &amp; RINGS
(Weight hooks &amp; rings, Hooks &amp; rings)
CLOCK WEIGHT HOOKS &amp; RINGS Used to stop Cuckoo and Black Forest chain passing right through. 16 pairs in brass.

COMTOISE MORBIER IRON CLOCK WEIGHTS
(Comtoise weights, Morbier weights, Weights, Cast iron weights)
COMTOISE MORBIER IRON CLOCK WEIGHT 4.2kg Oval shape, maximum width 70mm. Length including integral hook 230mm.
COMTOISE MORBIER CAST IRON CLOCK WEIGHT 4.9kg Bell shape, 85mm diameter at base, 65mm at shoulder. Height including hook 210mm.

DUTCH CLOCK LEAD WEIGHTS
(Dutch clock weights, Lead weights, Weights)
DUTCH CLOCK LEAD WEIGHT 3 1/2 lbs. 2" wide at top, 1 1/2" wide at base. 4" high.

BLACK FOREST WEIGHTS
Brass covered lead weights. Tapered brass shell with folded seam. Natural brass finish. (Weights, Black Forest weights, Brass weights)
BLACK FOREST WEIGHT 275g 30 x 130mm
BLACK FOREST WEIGHT 500g 30 x 86mm
BLACK FOREST WEIGHT 750g 30 x 125mm
BLACK FOREST WEIGHT 900g 35 x 105mm
BLACK FOREST WEIGHT 1200g 35 x 140mm
BLACK FOREST WEIGHT 1450g 35 x 155mm
BLACK FOREST WEIGHT 1800g 40 x 140mm
BLACK FOREST WEIGHT 2500g 45 x 170mm
BLACK FOREST WEIGHT 3200g 45 x 215mm

SATIN BRASS WEIGHT SHELLS
Unfilled. Threaded centre rod with hook and cap nut. (Weight shells, Brass weight shells)
SATIN BRASS WEIGHT SHELL 40 x 248mm
SATIN BRASS WEIGHT SHELL 50 x 250mm
SATIN BRASS WEIGHT SHELL 60 x 252mm

POLISHED BRASS WEIGHT SHELLS
Unfilled. Threaded centre rod with hook and cap nut. (Weight shells, Brass weight shells)
POLISHED BRASS WEIGHT SHELL 40 x 248mm
POLISHED BRASS WEIGHT SHELL 50 x 250mm
POLISHED BRASS WEIGHT SHELL 60 x 252mm

ZAANDAM CLOCK WEIGHTS
(Zandaam weights, Weights)
ZAANDAM CLOCK WEIGHT Brass pear shaped weight for Dutch clocks. Integral hook. 60mm at the widest point. 95mm high including hook. 1kg.

VIENNA CLOCK PULLEY
(Vienna pulleys, Pulleys)
VIENNA CLOCK PULLEY Brass pulley with screwed brass saddle. Maximum line diameter 1.2mm. Diameter 32mm.

LONGCASE PULLEYS
Well constructed from brass and steel. Size is wheel diameter. (Pulleys, Longcase pulleys)
LONGCASE PULLEY GUT 1 1/2"
LONGCASE PULLEY GUT 1 3/4"
LONGCASE PULLEY ROPE 1 1/2"
LONGCASE PULLEY CHAIN 1 1/2"

LONGCASE CHAIN CONVERSIONS
Eliminate frequent rope replacement and dust. (Chain conversion, Longcase chain conversion)
LONGCASE CHAIN CONVERSION KIT Kit contains the two internal pulleys and chain, but not the chain pulley or counterweight. They may be re-useable. Pulleys have 6.4mm internal holes in 11mm brass centres.
CHAIN CONVERSION SPROCKET SET To keep as much original as possible, just fit the pulleys with these chain sprockets. Each set includes 2 sprockets and 2 pairs of washers. No other parts included. Suitable chain : 12ft, 42 links per foot 0388 004215

AMERICAN CLOCK PULLEYS
(American pulleys, Pulleys)
AMERICAN CLOCK PULLEY SET 5 assorted pulleys. 2 for the top of 'OG's, one to stop the cord from fouling the movement and 2 for Steeple clocks.

O.G. CLOCK DUST COVERS
(O.G. Dust covers, Dust Covers)
O.G. CLOCK DUST COVERS Authentic dust covers carved from solid wood, to fit over O.G. and other American clock weight pulleys. 115mm long x 22mm wide and 15mm high. Sold in pairs.

HOLE END CLOCK MAINSPRINGS
You will find other sizes of mainspring in the gramophone section. (Mainsprings, Hole end springs, Clock springs, Springs)
HOLE END CLOCK MAINSPRING 5mm x 0.25mm x 40mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 5mm x 0.28mm x 25mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 6mm x 0.25mm x 25mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 6mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 7mm x 0.20mm x 20mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 8mm x 0.25mm x 25mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 9mm x 0.20mm x 20mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 9mm x 0.25mm x 20mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 10mm x 0.20mm x 20mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 10mm x 0.25mm x 25mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 10mm x 0.25mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 10mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 10mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 10mm x 0.55mm x 45mm Carbon steel.
HOLE END CLOCK MAINSPRING 11mm x 0.20mm x 20mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 11mm x 0.25mm x 20mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 11mm x 0.25mm x 25mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 11mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 11mm x 0.35mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 11mm x 0.35mm x 65mm Carbon steel.
HOLE END CLOCK MAINSPRING 12mm x 0.25mm x 25mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 12mm x 0.30mm x 25mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 12mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 12mm x 0.30mm x 32mm Carbon Steel
HOLE END CLOCK MAINSPRING 12mm x 0.33mm x 25mm Carbon Steel
HOLE END CLOCK MAINSPRING 12mm x 0.35mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 12mm x 0.38mm x 24mm Carbon Steel
HOLE END CLOCK MAINSPRING 12mm x 0.40mm x 40mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 12mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 13mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 13mm x 0.35mm x 28mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 13mm x 0.35mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 13mm x 0.36mm x 30mm Carbon Steel
HOLE END CLOCK MAINSPRING 13mm x 0.40mm x 40mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 13mm x 0.40mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 13mm x 0.55mm x 32mm Carbon Steel
HOLE END CLOCK MAINSPRING 14mm x 0.25mm x 25mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 14mm x 0.25mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 14mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRINGS 14 x 0.30mm x 30mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 14mm x 0.33mm x 25mm Carbon Steel
HOLE END CLOCK MAINSPRING 14mm x 0.35mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 14mm x 0.35mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 14mm x 0.36mm x 30mm Carbon Steel
HOLE END CLOCK MAINSPRING 14mm x 0.40mm x 40mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 14mm x 0.41mm x 28mm Carbon Steel
HOLE END CLOCK MAINSPRING 14mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 15mm x 0.25mm x 25mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 15mm x 0.25mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 15mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 15 x 0.30mm x 30mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 15mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 15mm x 0.50mm x 32mm Carbon Steel
HOLE END CLOCK MAINSPRING 16mm x 0.25mm x 25mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 16mm x 0.25mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 16mm x 0.25mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 16mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 16mm x 0.35mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 16mm x 0.40mm x 40mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 16mm x 0.40mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 16mm x 0.45mm x 40mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 16mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 16mm x 0.46mm x 36mm Carbon Steel
HOLE END CLOCK MAINSPRING 16mm x 0.65mm x 80mm Carbon steel.
HOLE END CLOCK MAINSPRING 17mm x 0.25mm x 25mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 17mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 17mm x 0.30mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 17mm x 0.35mm x 35mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 17 x .35mm x 35mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 17mm x 0.35mm x 40mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 17mm x 0.40mm x 40mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 17 x .40mm x 40mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 17mm x 0.40mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 17mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 17 x .45mm x 45mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 17mm x 0.50mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 18mm x 0.25mm x 25mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 18mm x 0.25mm x 30mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 18 x .25mm x 30mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 18mm x 0.25mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 18mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 18 x .30mm x 30mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 18mm x 0.35mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 18mm x 0.35mm x 40mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 18mm x 0.40mm x 40mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 18 x .40mm x 40mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 18mm x 0.40mm x 45mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 18 x .40mm x 45mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 18mm x 0.41mm x 32mm Carbon Steel
HOLE END CLOCK MAINSPRING 18mm x 0.45mm x 40mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 18mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 18 x .45mm x 45mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 18mm x 0.46mm x 38mm Carbon Steel
HOLE END CLOCK MAINSPRING 18mm x 0.50mm x 45mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 18 x .50mm x 45mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 18mm x 0.50mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 19mm x 0.25mm x 25mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 19mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 19 x .30mm x 30mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 19mm x 0.30mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 19mm x 0.35mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 19mm x 0.35mm x 55mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 19mm x 0.40mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 19mm x 0.40mm x 40mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 19mm x 0.40mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 19mm x 0.41mm x 38mm Carbon Steel
HOLE END CLOCK MAINSPRING 19mm x 0.43mm x 36mm Carbon Steel
HOLE END CLOCK MAINSPRING 19mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 19 x .45mm x 45mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 19mm x 0.50mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 20mm x 0.25mm x 30mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 20 x .25mm x 30mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 20mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 20 x .30mm x 30mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 20mm x 0.30mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 20mm x 0.35mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 20mm x 0.40mm x 40mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 20mm x 0.40mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 20mm x 0.41mm x 38mm Carbon Steel
HOLE END CLOCK MAINSPRING 20mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 20 x .45mm x 45mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 20mm x 0.50mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 20mm x 0.60mm x 65mm Carbon steel.
HOLE END CLOCK MAINSPRING 21mm x 0.25mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 21mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 21 x .30mm x 30mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 21mm x 0.38mm x 50mm Carbon Steel
HOLE END CLOCK MAINSPRING 21mm x 0.40mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 21mm x 0.40mm x 43mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 21mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 21mm x 0.46mm x 38mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 21mm x 0.50mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 22mm x 0.25mm x 28mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 22mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 22mm x 0.30mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 22mm x 0.35mm x 34mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 22mm x 0.35mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 22mm x 0.40mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 22mm x 0.40mm x 40mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 22mm x 0.40mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 22mm x 0.40mm x 55mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 22mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 22mm x 0.50mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 22mm x 0.60mm x 60mm Carbon steel.
HOLE END CLOCK MAINSPRING 23mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 24mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 24mm x 0.35mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 24mm x 0.40mm x 40mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 24 x .40mm x 40mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 24mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 24mm x 0.45mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 24mm x 0.50mm x 50mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 24 x .50mm x 50mm Classic range. Sold singly Carbon steel.
HOLE END CLOCK MAINSPRING 25mm x 0.35mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 25mm x 0.35mm x 44mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 25mm x 0.40mm x 40mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 25mm x 0.45mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 25mm x 0.50mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 26mm x 0.40mm x 65mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 26mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 27mm x 0.35mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 27mm x 0.40mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 27mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 27mm x 0.45mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 28mm x 0.40mm x 40mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 28mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 28mm x 0.50mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 28mm x 0.55mm x 55mm Carbon steel.
HOLE END CLOCK MAINSPRING 29mm x 0.40mm x 54mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 29mm x 0.40mm x 64mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 30mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 31mm x 0.30mm x 30mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 31mm x 0.30mm x 35mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 31mm x 0.30mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 31mm x 0.30mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 31mm x 0.45mm x 57mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 32mm x 0.40mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 32mm x 0.40mm x 55mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 32mm x 0.40mm x 60mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 32mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 32mm x 0.45mm x 54mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 35mm x 0.40mm x 55mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 35mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 35mm x 0.45mm x 51mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 35mm x 0.45mm x 54mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 35mm x 0.45mm x 64mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 35mm x 0.50mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 35mm x 0.50mm x 55mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 38mm x 0.40mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 38mm x 0.40mm x 57mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 38mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 38mm x 0.45mm x 51mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 38mm x 0.45mm x 54mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 38mm x 0.45mm x 57mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 38mm x 0.45mm x 64mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 38mm x 0.50mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 38mm x 0.50mm x 55mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 38mm x 0.50mm x 60mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 38mm x 0.60mm x 55mm Carbon steel.
HOLE END CLOCK MAINSPRING 40mm x 0.45mm x 45mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 40mm x 0.45mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 40mm x 0.45mm x 57mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 40mm x 0.50mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 41mm x 0.45mm x 51mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 41mm x 0.45mm x 54mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 41mm x 0.45mm x 57mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 41mm x 0.45mm x 64mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 45mm x 0.45mm x 54mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 48mm x 0.50mm x 50mm Stainless clock-grade steel.
HOLE END CLOCK MAINSPRING 50.5mm x 0.40mm x 35mm Carbon steel.
HOLE END CLOCK MAINSPRING 51mm x 0.50mm x 50mm Stainless clock-grade steel.
HOLE END MAINSPRINGS 22 x .30mm x 30mm Classic range. Sold singly Carbon steel.

MAINSPRING STEEL IN 3m COILS
When we relocated to Brighton we found some spring steel, made in the UK 30 years ago. Sheared ends. Due to its age, some may have superficial rust marks. The quality is far in excess of that used by British spring makers today. (Mainpring steel)
SPRING STEEL 3m 3/4" x 0.010"
SPRING STEEL 3m 7/8" x 0.014"
SPRING STEEL 3m 1 3/8" x 0.018"

LOOP END CLOCK MAINSPRINGS
(Mainsprings, Loop ended mainspring, Spring, loop ended)
LOOP END CLOCK MAINSPRING 3.0mm x 0.23mm x 360mm
LOOP END CLOCK MAINSPRING 3.5mm x 0.22mm x 540mm
LOOP END CLOCK MAINSPRING 4.0mm x 0.25mm x 800mm
LOOP END CLOCK MAINSPRING 4.0mm x 0.30mm x 670mm
LOOP END CLOCK MAINSPRING 4.5mm x 0.25mm x 650mm
LOOP END CLOCK MAINSPRING 4.5mm x 0.30mm x 600mm
LOOP END CLOCK MAINSPRING 5.0mm x 0.25mm x 600mm
LOOP END CLOCK MAINSPRING 5.0mm x 0.35mm x 650mm
LOOP END CLOCK MAINSPRING 5.0mm x 0.40mm x 650mm
LOOP END CLOCK MAINSPRING 6.0mm x 0.25mm x 550mm
LOOP END CLOCK MAINSPRING 6.0mm x 0.30mm x 560mm
LOOP END CLOCK MAINSPRING 6.0mm x 0.30mm x 630mm
LOOP END CLOCK MAINSPRING 6.0mm x 0.30mm x 650mm
LOOP END CLOCK MAINSPRING 6.0mm x 0.30mm x 800mm
LOOP END CLOCK MAINSPRING 6.0mm x 0.35mm x 570mm
LOOP END CLOCK MAINSPRING 6.0mm x 0.40mm x 1000mm
LOOP END CLOCK MAINSPRING 6.4mm x 0.31mm x 1041mm
LOOP END CLOCK MAINSPRING 6.4mm x 0.41mm x 1370mm
LOOP END CLOCK MAINSPRING 6.5mm x 0.25mm x 650mm
LOOP END CLOCK MAINSPRING 6.5mm x 0.27mm x 650mm
LOOP END CLOCK MAINSPRING 6.5mm x 0.27mm x 700mm
LOOP END CLOCK MAINSPRING 6.5mm x 0.30mm x 1000mm
LOOP END CLOCK MAINSPRING 7.0mm x 0.22mm x 1500mm
LOOP END CLOCK MAINSPRING 7.0mm x 0.30mm x 1000mm
LOOP END CLOCK MAINSPRING 7.0mm x 0.45mm x 1200mm
LOOP END CLOCK MAINSPRING 7.5mm x 0.25mm x 800mm
LOOP END CLOCK MAINSPRING 7.5mm x 0.20mm x 1500mm
LOOP END CLOCK MAINSPRING 7.5mm x 0.30mm x 1100mm
LOOP END CLOCK MAINSPRING 7.5mm x 0.32mm x 950mm
LOOP END CLOCK MAINSPRING 7.5mm x 0.40mm x 1100mm
LOOP END CLOCK MAINSPRING 8.0mm x 0.20mm x 750mm
LOOP END CLOCK MAINSPRING 8.0mm x 0.25mm x 600mm
LOOP END CLOCK MAINSPRING 8.0mm x 0.25mm x 800mm
LOOP END CLOCK MAINSPRING 8.0mm x 0.30mm x 1000mm
LOOP END CLOCK MAINSPRING 8.0mm x 0.40mm x 1000mm
LOOP END CLOCK MAINSPRING 8.0mm x 0.41mm x 1829mm
LOOP END CLOCK MAINSPRING 8.0mm x 0.50mm x 1066mm
LOOP END CLOCK MAINSPRING 8.0mm x 0.50mm x 1300mm
LOOP END CLOCK MAINSPRING 8.0mm x 0.50mm x 1350mm
LOOP END CLOCK MAINSPRING 9.0mm x 0.40mm x 1000mm
LOOP END CLOCK MAINSPRING 9.0mm x 0.45mm x 1300mm
LOOP END CLOCK MAINSPRING 9.5mm x 0.35mm x 1346mm
LOOP END CLOCK MAINSPRING 9.5mm x 0.36mm x 1524mm
LOOP END CLOCK MAINSPRING 9.5mm x 0.48mm x 1219mm
LOOP END CLOCK MAINSPRING 10.0mm x 0.40mm x 1000mm
LOOP END CLOCK MAINSPRING 10mm x 36mm x 1829mm Carbon steel.
LOOP END CLOCK MAINSPRING 11.0mm x 0.46mm x 1219mm
LOOP END CLOCK MAINSPRING 12.7mm x 0.41mm x 1676mm
LOOP END CLOCK MAINSPRING 12.7mm x 0.46mm x 2438mm
LOOP END CLOCK MAINSPRING 14.3mm x 0.38mm x 1980mm
LOOP END CLOCK MAINSPRING 14.3mm x 0.46mm x 2438mm
LOOP END CLOCK MAINSPRING 16mm x 0.33mm x 1753mm
LOOP END CLOCK MAINSPRING 16.0mm x 0.46mm x 2430mm
LOOP END CLOCK MAINSPRING 17.5mm x 0.38mm x 2743mm
LOOP END CLOCK MAINSPRING 17.5mm x 0.46mm x 2430mm
LOOP END CLOCK MAINSPRING 19mm x 0.32mm x 1800mm
LOOP END CLOCK MAINSPRING 19mm x 0.36mm x 2743mm
LOOP END CLOCK MAINSPRING 19mm x 0.40mm x 4200mm 31 day clocks.
LOOP END CLOCK MAINSPRING 19mm x 0.43mm x 3040mm 31 day clocks.
LOOP END CLOCK MAINSPRING 19mm x 0.45mm x 2430mm 31 day clocks.

BRASS FUSEE SET-UP RATCHET
(Fusee setup ratchet)
BRASS FUSEE SET-UP RATCHET 25mm diameter solid brass ratchet wheel. 3mm thick. 5mm square centre hole.

RATCHET WHEELS
2mm thick, with small hole. (Ratchet wheels)
BRASS RATCHET WHEEL FOR CLOCKS 10mm
BRASS RATCHET WHEEL FOR CLOCKS 11mm
BRASS RATCHET WHEEL FOR CLOCKS 12mm
BRASS RATCHET WHEEL FOR CLOCKS 13mm
BRASS RATCHET WHEEL FOR CLOCKS 14mm
BRASS RATCHET WHEEL FOR CLOCKS 15mm
BRASS RATCHET WHEEL FOR CLOCKS 16mm
BRASS RATCHET WHEEL FOR CLOCKS 17mm
BRASS RATCHET WHEEL FOR CLOCKS 18mm
BRASS RATCHET WHEEL FOR CLOCKS 19mm
BRASS RATCHET WHEEL FOR CLOCKS 20mm
BRASS RATCHET WHEEL FOR CLOCKS 21mm
BRASS RATCHET WHEEL FOR CLOCKS 22mm
BRASS RATCHET WHEEL FOR CLOCKS 23mm
BRASS RATCHET WHEEL FOR CLOCKS 24mm
RATCHET WHEEL SET 1 each of 11mm - 20mm.

BRASS CLICKS FOR AMERICAN CLOCKS
(Clicks, American clicks)
BRASS CLICKS FOR AMERICAN CLOCKS Complete with rivets and springs. Three right and three left per packet.

LONGCASE CLICKS &amp; CLICK SPRINGS
(Clicks, Longcase clicks)
LONGCASE CLICK Steel click 4BA thread.
LONGCASE CLICK SPRING, COMMA
LONGCASE CLICK SPRING, BI-PIN

FUSEE CLICK SPRINGS
(Fusee click spring, Clicks)
FUSEE CLICK SPRING In brass.

FRENCH CLICKS
(French clicks, Clicks)
FRENCH CLICK &amp; SPRING COMBINED Steel.
FRENCH CLICK In steel.

CLICKS - FOR MASS PRODUCED CLOCKS
(Clicks)
CLICK - MASS PRODUCED CLOCKS NO. 1 LEFT
CLICK - MASS PRODUCED CLOCKS NO. 2 RIGHT
CLICK - MASS PRODUCED CLOCKS NO. 3
CLICK - MASS PRODUCED CLOCKS NO. 4
CLICK - MASS PRODUCED CLOCKS NO. 5
CLICK - MASS PRODUCED CLOCKS NO. 6
CLICK - MASS PRODUCED CLOCKS NO. 7
CLICK - MASS PRODUCED CLOCKS NO. 8
CLICK - MASS PRODUCED CLOCKS NO. 9
CLICK - MASS PRODUCED CLOCKS NO. 10
CLICK SPRING No. 12
CLICK - MASS PRODUCED CLOCKS NO. 13
CLICK SPRING FOR KIENIGER CLOCKS
CLICK SPRING FOR HERMLE CLOCKS 21mm long
CLICK SPRING FOR HERMLE CLOCKS 26mm long
CLICK SPRING FOR HERMLE CLOCKS 23mm long
CLICK SPRING FOR HERMLE CLOCKS 62mm long
CLICK ASSORTMENT 20 POPULAR CLICKS

FUSEE STOP ARMS
(Fusee stop arm)
FUSEE STOP ARM Bright steel.

FRENCH CLOCK SCREW SPRINGS
(Screw springs, French screw springs)
FRENCH CLOCK SCREW SPRINGS, PACK OF 3 Blued steel M1.6 screw with an 80mm length of 0.45mm blued spring steel fitted to the end. Used in French Clocks as return springs.

LONGCASE CLOCK ROPE
Woven linen. 12ft long. For 30 hour clocks. No. 2 rope is often used for lantern clocks. (Rope, Clock rope, Lines)
CLOCK ROPE NO. 2 Diameter 5.0mm.
CLOCK ROPE NO. 3 Diameter 5.5mm.
CLOCK ROPE NO. 4 Diameter 6.0mm.
CLOCK ROPE NO. 5 Diameter 7.0mm.
CLOCK ROPE NO. 6 Diameter 8.0mm.

FUSEE CLOCK LINES
Each train normally uses about 4'6". S.W.L. stands for safe working load, 1/5th of the minimum breaking strain. We cannot calculate this figure for natural products such as gut line. (Lines, Fusee lines, Wire lines, Phosphor bronze lines)
NATURAL GUT Diameter: 1.2 - 1.4mm, Length: 5'
GALVANIZED WIRE Dia: 1.2mm, Length: 5', SWL: 28kg
GALVANISED WIRE Diameter: 1.5mm, Length: 5', SWL: 59lbs
PHOSPHOR BRONZE Diameter: 1.4mm, Length 5', SWL: 35lbs
SYNTHETIC GUT Diameter: 1.4mm, Length: 5', SWL: 39lbs

AMERICAN WEIGHT CLOCK CORDS
Woven Synthetic cord 4ft long. O.G. clocks use about 3ft per train. We supply synthetic cord because the original type perishes rapidly, causing the weights to fall. (American cord, O.G. cord, Lines)
AMERICAN WEIGHT CLOCK CORD 30hr Woven synthetic cord. Diameter: 1.0mm Length: 4' SWL: 9lbs.
AMERICAN WEIGHT CLOCK CORD 8 DAY Woven synthetic cord. Diameter: 1.5mm Length: 4' SWL: 20lbs.

LONGCASE CLOCK LINES
Each train normally uses 10ft. S.W.L. stands for safe working load, 1/5th of the minimum breaking strain. We cannot calculate this figure for natural products such as gut line. (Longcase lines, Lines)
LONGCASE NATURAL GUT LINE Diameter: 1.2 - 1.4mm, Length: 21'. Very high grade line.
LONGCASE CLOCK SYNTHETIC GUT Diameter: 1.4mm, Length: 21', SWL: 39lbs
LONGCASE CLOCK SYNTHETIC GUT Diameter: 1.4mm, Length: 200m, SWL: 39lbs
NATURAL HIDE LINE Diameter: 1.2 - 1.4mm, Length : 21'
GALVANIZED WIRE FOR LONGCASE CLOCK Diameter: 1.2mm, Length: 21', SWL: 28kg
GALVANIZED WIRE FOR LONGCASE CLOCK Diameter: 1.5mm, Length: 21', SWL: 30kg.
LONGCASE PHOSPHOR BRONZE CLOCK LINE Diameter: 1.4mm, Length: 21', SWL: 35lbs

VIENNA LINES
Fine lines for Vienna regulators &amp; miniature fusee clocks (Vienna lines, Lines)
FINE NATURAL CLOCK GUT - ULTRA FINE Diameter: 0.6mm Length: 1.25m Our natural gut is the finest quality available.
FINE NATURAL CLOCK GUT - EXTRA FINE Diameter: 0.8mm Length: 1.25m Our natural gut is the finest quality available.
FINE NATURAL CLOCK GUT - STANDARD Diameter: 0.8mm Length: 21' Our natural gut is the finest quality available.
FINE SYNTHETIC GUT - EXTRA FINE Diameter: 0.85mm Length: 21' SWL: 15lbs
FINE SYNTHETIC GUT - EXTRA FINE Diameter: 0.85mm Length: 200m SWL:15lbs
BRASS VIENNA REGULATOR LINE Diameter: 0.8mm Length: 1m. Also available in 10m coils. 1423 001015
BRASS VIENNA REGULATOR LINE. Diameter: 0.8mm Length: 10m.

TURRET CLOCK WIRES
Galvanised. Sold by the metre. The Safe Working Load is 1/5th of the minimum breaking strain. Other diameters can be supplied to special order. (Turret clock wire, Lines, Galvanised line)
TURRET CLOCK WIRE Diameter: 2mm SWL: 120lbs
TURRET CLOCK WIRE Diameter: 3mm SWL: 220lbs.
TURRET CLOCK WIRE Diameter: 4mm SWL: 380lbs

COMTOISE CORDS
(Comtoise cord, Lines)
COMTOISE CORD Woven linen. Diameter: 2mm. Length: 21'. Colour: Red
COMTOISE CORD Woven linen. Diameter: 2mm. Length: 21'. Colour: Natural
COMTOISE CORD Woven linen. Diameter: 2mm. Length: 50m. Colour: Natural

WATCH BATTERIES (Button cells)
Sold individually. For trade quantities, please refer to the separate lists. (Watch batteries, Button cells, Batteries.)
WATCH BATTERY 301 1.5v Low drain silver oxide 11.6 x 4.2 (RW34 SR43SW 1)
WATCH BATTERY 303 1.5v Low drain silver oxide 11.6 x 5.6 (RW32 SR44SW)
WATCH BATTERY 315 1.5v Low drain silver oxide 7.9 x 1.6 (RW316 SR716SW 40)
WATCH BATTERY 317 1.5v Low drain silver oxide 5.8 x 1.6 (RW326 SR516SW)
WATCH BATTERY 319 1.5v Low drain silver oxide 5.8 x 2.7 (RW328 SR527SW)
WATCH BATTERY 321 1.5v Low drain silver oxide 6.8 x 1.6 (RW321 SR616SW 38)
WATCH BATTERY 329 1.5v Low drain silver oxide 7.9 x 3.1 (RW300 24)
WATCH BATTERY 335 1.5v Low drain silver oxide 5.8 x 1.2 (RW335 SR512SW)
WATCH BATTERY 337 1.5v Low drain silver oxide 4.8 x 1.6 (SR416SW)
WATCH BATTERY 341 1.5v Low drain silver oxide 7.9 x 1.5
WATCH BATTERY 344 1.5v Low drain silver oxide 11.6 x 3.6 (RW36 12)
WATCH BATTERY 357 1.5v High drain silver oxide 11.6 x 5.4 (RW42 SR44W 7)
WATCH BATTERY 361 1.5v High drain silver oxide 7.9 x 2.1 (RW410 SR721W 46)
WATCH BATTERY 362 1.5v Low drain silver oxide 7.9 x 2.1 (RW310 SR721SW 19)
WATCH BATTERY 364 1.5v Low drain silver oxide 6.8 x 2.1 (RW320 SR621SW 31)
WATCH BATTERY 370 1.5v High drain silver oxide 9.5 x 2.1 (RW415 SR920W 36)
WATCH BATTERY 371 1.5v Low drain silver oxide 9.5 x 2.1 (RW315 SR920SW 30)
WATCH BATTERY 373 1.5v Low drain silver oxide 9.5 x 1.6 (RW317 SR916SW 41)
WATCH BATTERY 377 1.5v Low drain silver oxide 6.8 x 2.6 (RW329 SR626SW 37)
WATCH BATTERY 379 1.5v Low drain silver oxide 5.8 x 2.1 (RW327 SR521SW 50)
WATCH BATTERY 381 1.5v Low drain silver oxide 11.6 x 2.1 (RW30 SR1120SW 34)
WATCH BATTERY 389 1.5v High drain silver oxide 11.6 x 3.1 (RW49 SR1130W 17)
WATCH BATTERY 390 1.5v Low drain silver oxide 11.6 x 3.1 (RW39 SR1130SW 11)
WATCH BATTERY 391 1.5v High drain silver oxide 11.6 x 2.1 (RW40 SR1120W 23)
WATCH BATTERY 392 1.5v High drain silver oxide 7.9 x 3.6 (RW47 SR42W 2)
WATCH BATTERY 393 1.5v High drain silver oxide 7.9 x 5.4 (RW48 SR753W 15)
WATCH BATTERY 394 1.5v Low drain silver oxide 9.5 x 3.6 (RW33 SR936SW 27)
WATCH BATTERY 395 1.5v Low drain silver oxide 9.5 x 2.6 (RW313 SR927SW 25)
WATCH BATTERY 396 1.5v High drain silver oxide 7.9 x 2.6 (RW411 SR726W 29)
WATCH BATTERY 397 1.5v Low drain silver oxide 7.9 x 2.6 (RW311 SR726SW 26)
WATCH BATTERY 399 1.5v High drain silver oxide 9.5 x 2.6 (RW413 SR927W 35)

LITHIUM BUTTON CELLS
For computers, toys, remote controls etc. (Lithium cells, Button Cells, Batteries)
LITHIUM BATTERY 3v. 2430. Diameter: 24mm Height: 3.0mm
LITHIUM BATTERY 3v. Diameter: 12mm Height: 1.6mm
LITHIUM BATTERY 3v. Diameter: 12mm Height: 2.0mm
LITHIUM BATTERY 3v. Diameter: 10mm Height: 2.5mm
LITHIUM BATTERY 3v. 2450. Diameter: 24mm Height: 5.0mm
LITHIUM BATTERY 3v. Diameter: 23mm Height: 2.5mm
LITHIUM BATTERY 3v. 2025. Diameter: 20mm Height: 2.5mm
LITHIUM BATTERY 3v. 2016. Diameter: 20mm Height: 1.6mm
LITHIUM BATTERY 3v. Diameter: 12mm Height: 2.5mm
LITHIUM BATTERY 3v. Diameter: 16mm Height: 2.0mm
LITHIUM BATTERY 3v. Diameter: 20mm Height: 1.2mm
LITHIUM BATTERY 3v. 2032. Diameter: 20mm Height: 3.2mm

HEARING AID BATTERIES
1.4v Renata zinc-air batteries. Known by colour and part number. 6 batteries per handy pack. (Hearing aid batteries, Batteries)
HEARING AID BATTERIES ZA10 X 6 YELLOW (10AE, AC10/230, L10ZA, PR70, 10A)
HEARING AID BATTERIES ZA13 X 6 ORANGE (13AE, AC13, DA13, PR48, 13A, V13)
HEARING AID BATTERIES ZA312 X 6 BROWN (312AE, AC312, PR41, 312A, V312)

CLOCK BATTERIES
Some batteries have had several reference numbers over the years. Those shown in brackets are old manufacturer's references. Sold singly. (Batteries, Clock batteries)
CLOCK BATTERY D TYPE 2 PACK. 1.5v
CAR ALARM AND LIGHTER BATTERY 12v 23A/VR22 (23, 23L&amp;M, EL12)
BATTERY FOR CALCULATOR, GAMES, TOYS 1.5v 2 PACK LR44 (RW82, V13GA, A76)
BATTERY CAMERA 3v LITHIUM CR123.
CLOCK BATTERY LR1 Used in many small clocks and insertion movements.

CLOCK CHAIN
(Chain)
CLOCK CHAIN NO.46 Brass. I/L: 4.00mm. E/W:3.00mm. Wire: 0.70mm. LPF: 75.8. Len: 6ft.
CLOCK CHAIN NO.22 Brass. I/L: 4.60mm. E/W:3.10mm. Wire: 0.70mm. LPF: 65.9. Len: 6ft.
CLOCK CHAIN NO.19 Brass. I/L: 4.80mm. E/W:3.60mm. Wire: 0.90mm. LPF: 63.1. Len: 6ft.
CLOCK CHAIN NO.158 Brass. I/L: 5.02mm. E/W:3.50mm. Wire: 0.86mm. LPF: 58.8. Len: 6ft.
CLOCK CHAIN NO.13 Brass. I/L: 5.70mm. E/W:4.20mm. Wire: 1.00mm. LPF: 53.1. Len: 6ft.
CLOCK CHAIN NO.100 Iron. I/L: 6.00mm. E/W: 4.40mm. Wire: 1.00mm. LPF: 50.5. Len: 6ft.
CLOCK CHAIN NO.100 Brass. I/L: 6.00mm. E/W: 4.40mm. Wire: 1.00mm. LPF: 50.5. Len: 6ft.
CLOCK CHAIN NO.37 Iron. I/L: 6.10mm. E/W:4.80mm. Wire: 1.00mm. LPF: 49.6. Len: 6ft.
CLOCK CHAIN NO.37 Brass. I/L: 6.10mm. E/W:4.80mm. Wire: 1.00mm. LPF: 49.6. Len: 6ft.
CLOCK CHAIN NO.39 Brass. I/L: 6.30mm. E/W:5.30mm. Wire: 1.30mm. LPF: 47.9. Len: 6ft.
CLOCK CHAIN NO.44 Brass. I/L: 6.30mm. E/W:4.60mm. Wire: 1.05mm. LPF: 48.0. Len: 6ft.
CLOCK CHAIN NO.12 Brass. I/L: 6.40mm. E/W:4.60mm. Wire: 1.05mm. LPF: 47.2. Len: 6ft.
CLOCK CHAIN NO.1 Iron. I/L: 6.50mm. E/W:5.00mm. Wire: 1.50mm. LPF: 46.4. Len: 6ft.
CLOCK CHAIN NO.1 Brass. I/L: 6.50mm. E/W:5.00mm. Wire: 1.50mm. LPF: 46.4. Len: 6ft.
CLOCK CHAIN NO.147 Brass. I/L: 6.50mm. E/W:5.95mm. Wire: 1.62mm. LPF: 46.6. Len: 6ft.
CLOCK CHAIN NO.146 Brass. I/L: 6.56mm. E/W:5.35mm. Wire: 1.35mm. LPF: 46.4. Len: 6ft.
CLOCK CHAIN NO.8 6.30mm I/Length. 1.30mm wire. 5.00mm E/Width. Brass. 47.8 LPF. 6ft length.
CLOCK CHAIN NO.159 Iron. I/L: 6.60mm. E/W:3.60mm. Wire: 0.90mm. LPF: 46.0. Len: 6ft.
CLOCK CHAIN NO.103 Brass. I/L: 6.60mm. E/W:5.00mm. Wire: 1.35mm. LPF: 45.8. Len: 6ft.
CLOCK CHAIN NO.103 Iron. I/L: 6.60mm. E/W:5.00mm. Wire: 1.35mm. LPF: 45.8. Len: 6ft.
CLOCK CHAIN NO.106 Iron. I/L: 6.80mm. E/W:3.70mm. Wire: 0.90mm. LPF: 44.6. Len: 6ft.
CLOCK CHAIN NO.106 Brass. I/L: 6.80mm. E/W:3.70mm. Wire: 0.90mm. LPF: 44.6. Len: 6ft.
CLOCK CHAIN NO.42 Iron. I/L: 7.20mm. E/W:6.70mm. Wire: 1.60mm. LPF: 41.8. Len: 12ft.
CLOCK CHAIN NO.140 Iron. I/L: 7.20mm. E/W:4.80mm. Wire: 1.18mm. LPF: 40.0. Len: 6ft.
CLOCK CHAIN NO.140 Brass. I/L: 7.20mm. E/W:4.80mm. Wire: 1.18mm. LPF: 40.0. Len: 6ft.
CLOCK CHAIN NO.104 Iron. I/L: 7.25mm. E/W:5.00mm. Wire: 1.20mm. LPF: 41.7. Len: 6ft.
CLOCK CHAIN NO.104 Brass. I/L: 7.25mm. E/W:5.00mm. Wire: 1.20mm. LPF: 41.7. Len: 6ft.
CLOCK CHAIN NO.101 Iron. I/L: 7.90mm. E/W:5.10mm. Wire: 1.55mm. LPF: 38. Len: 6ft.
CLOCK CHAIN NO.101 Brass. I/L: 7.90mm. E/W:5.10mm. Wire: 1.55mm. LPF: 38. Len: 6ft.
CLOCK CHAIN NO.6 Brass. I/L: 8.00mm. E/W:6.90mm. Wire: 2.00mm. LPF: 37.6. Len: 6ft.
CLOCK CHAIN NO.105 Iron. I/L: 8.10mm. E/W:4.60mm. Wire: 1.00mm. LPF: 37.4. Len: 6ft.
CLOCK CHAIN NO.105 Brass. I/L: 8.10mm. E/W:4.60mm. Wire: 1.00mm. LPF: 37.4. Len: 6ft.
CLOCK CHAIN NO.109 Iron. I/L: 8.30mm. E/W:6.90mm. Wire: 1.80mm. LPF: 36.0. Len: 6ft.
CLOCK CHAIN NO.136 Brass. I/L: 8.30mm. E/W:6.60mm. Wire: 1.80mm. LPF: 36.8. Len: 6ft.
CLOCK CHAIN NO.36 Iron. I/L: 8.50mm. E/W:7.00mm. Wire: 1.80mm. LPF: 36.0. Len: 12ft.
CLOCK CHAIN NO.33 Iron. I/L: 9.00mm. E/W:6.70mm. Wire: 1.90mm. LPF: 33.4. Len: 12ft.
CLOCK CHAIN NO.108 Iron. I/L: 9.45mm. E/W:5.14mm. Wire: 1.18mm. LPF: 31.0. Len: 6ft.
CLOCK CHAIN NO.107 Chromed Brass. I/L: 9.60mm. E/W:6.60mm. Wire: 1.50mm. LPF: 31.5. Len: 6ft.

Going Train

AMERICAN VERGES
Our three popular verges that fit over 50 models between them. If none of these suit, you may have to bend your own using the partly made verge. (American verges, Verges)
POPULAR VERGE 1200 Width of jaw 27mm. Height of vertical face 10mm. Pinhole 13mm from vertical face.
POPULAR VERGE 4800 Width of jaw 26mm. Vertical face 10mm. Pinhole 8mm from vertical face.
POPULAR VERGE 4900 Width of jaw 28mm. Vertical face 8mm. Pinhole 15mm from Vertical face.

VERGE ASSORTMENTS FOR AMERICAN CLOCKS
(Verges)
ASSORTMENT OF 9 POPULAR VERGES External only.

VERGE KITS
(Verges, Verge kit)
PARTLY MADE VERGE Simply bend to match original, harden &amp; polish.
VERGE KIT With all the parts needed to make three verges. Only riveting is required.

VERGE AND WHEEL SETS
Sets of matching American verge and escape wheel. Hardened and polished. Ready for fitting. Not all wheels are crossed out by the manufacturer. (Verges, Wheels, Escape wheels)
VERGE AND WHEEL SET 26 TEETH
VERGE AND WHEEL SET 27 TEETH
VERGE AND WHEEL SET 28 TEETH
VERGE AND WHEEL SET 29 TEETH
VERGE AND WHEEL SET 30 TEETH
VERGE AND WHEEL SET 31 TEETH
VERGE AND WHEEL SET 32 TEETH
VERGE AND WHEEL SET 33 TEETH
VERGE AND WHEEL SET 34 TEETH
VERGE AND WHEEL SET 35 TEETH
VERGE AND WHEEL SET 36 TEETH
VERGE AND WHEEL SET 37 TEETH
VERGE AND WHEEL SET 38 TEETH
VERGE AND WHEEL SET 39 TEETH
VERGE AND WHEEL SET 40 TEETH
VERGE AND WHEEL SET 41 TEETH
VERGE AND WHEEL SET 42 TEETH
VERGE AND WHEEL SET 43 TEETH
VERGE AND WHEEL SET 44 TEETH
VERGE AND WHEEL SET 45 TEETH
VERGE AND WHEEL SET 46 TEETH
VERGE AND WHEEL SET 47 TEETH
VERGE AND WHEEL SET 48 TEETH
VERGE AND WHEEL SET 49 TEETH
VERGE AND WHEEL SET 50 TEETH
VERGE AND WHEEL SET 51 TEETH
VERGE AND WHEEL SET 52 TEETH

BETWEEN THE PLATE VERGES
A range of verges to go between the plates on American clocks. (Verges, Between the plate verges)
BETWEEN THE PLATE VERGE 2 32mm between plates. Overall length of pallet 23mm.
BETWEEN THE PLATE VERGE 3 33mm between plates. Overall length of pallet 26mm.
BETWEEN THE PLATE VERGE 4 45mm between plates. Overall length of pallet 25mm.

AMERICAN VERGE PIN PLATE
(Pin plate)
AMERICAN VERGE PIN PLATE Ready to rivet onto front plate.

AMERICAN SLOTTED SUSPENSION STUD
(Suspension stud, American suspension stud)
AMERICAN SLOTTED SUSPENSION STUD For supporting the suspension wire.

CLOCK JEWEL BARS
(Jewel bars, Elephant bars)
CLOCK JEWEL BARS Also known as 'Elephant bars' they support swinging arms on clocks. Solid brass bar with 2 jewels in the top. Overall length 27mm, excluding the 15mm of threaded shaft. Distance between centres 19mm.

FLOATING BALANCE WIRE
(Balance wire, Floating balance wire)
FLOATING BALANCE WIRE 1m. coil of 0.2mm floating balance wire. This is the suspension wire, not the coiled spring.

ASSORTED PALLET BLANKS
(Pallet blanks)
ASSORTED PALLET BLANKS 9 small blanks for German and other mass-produced clocks. 2-3mm thick.

HAIRSPRING ASSORTMENT
(Hairspring assortment)
HAIRSPRING ASSORTMENT 72 hairsprings with collets for mass-produced alarm and mantel clocks. 18mm max. diameter. Not intended for platform escapements.

SAPPHIRE PALLET JEWELS
Size given is the diameter. Normally set in place with shellac stick. Red sapphire. (Pallet jewels, Sapphire pallets)
SAPPHIRE PALLET JEWEL 1.75mm Red sapphire jewel sold singly. 1.75mm diameter.
SAPPHIRE PALLET JEWEL 2mm Red sapphire jewel sold singly. 2mm diameter.
SAPPHIRE PALLET JEWEL 2.25mm Red sapphire jewel sold singly. 2.25mm diameter.

STICK SHELLAC
(Shellac stick)
STICK SHELLAC For setting pallet jewels in place. 40g.

LONGCASE ESCAPE WHEELS
Cut and crossed out ready for mounting onto existing arbor. 30 teeth. Cut from solid brass. (Escape wheels, Longcase escape wheels)
LONGCASE ESCAPE WHEEL 43mm Thickness 1.6mm. Diameter 43mm.
LONGCASE ESCAPE WHEEL 45mm Thickness 1.6mm. Diameter 45mm.

LONGCASE WHEELS AND MATCHING PALLETS
(Escape wheels, Longcase escape wheels)
LONGCASE WHEEL AND MATCHING PALLET Wheel with matched pallet. 30 teeth. 1 1/2" centres. Small arc suitable for slim cases. Pallet is fully finished, ready for installation.

ASSORTED PALLET JAWS
(Pallet jaws)
ASSORTED PALLET JAWS For cuckoo and German mass-produced clocks. 12 pcs.

PALLET FORGINGS
(Pallet forging, Fusee pallet forging, Longcase pallet forging)
FUSEE PALLET FORGING Suitable for making a pallet for any fusee clock.
LONGCASE PALLET FORGING For making any Longcase pallet.

CRUTCH BLANKS
(Fusee crutch blank, Crutch blank, Longcase crutch blank)
FUSEE CLOCK CRUTCH BLANK Brass
FRENCH CRUTCH BLANK Brass
LONGCASE CRUTCH BLANK Steel

LONGCASE &amp; FUSEE TENSION SPRINGS
(Tension springs)
LONGCASE &amp; FUSEE TENSION SPRING Brass. Square pilot hole.

PENDULUM LEADERS
(Pendulum leaders, Leaders)
PENDULUM LEADER TYPE A Easily shortened or modified. 134mm from hook to pin. Steel.
PENDULUM LEADER TYPE B Easily shortened or modified. 163mm from hook to bar. Brass.

SUSPENSION RODS FOR AMERICAN &amp; GERMAN CLOCKS
(Suspension rod, American suspensions)
SUSPENSION ROD RIVETTED 16" The suspension is riveted to the end of the wire.
SUSPENSION ROD IN ONE PIECE 16" The suspension is has been made by flattening the wire. Hammered end.
AMERCAN SUSPENSION T TYPE HANGER Straight
AMERICAN SUSPENSION T TYPE HANGER Bent

LONGCASE CLOCK SUSPENSIONS
(Longcase suspensions, Suspensions)
LONGCASE SINGLE ENDED CLOCK SUSPENSION This is intended as a replacement for an existing pendulum.
LONGCASE DOUBLE ENDED CLOCK SUSPENSION 1/8" Whitworth thread. This is normally used when making up a complete pendulum.

FRENCH CLOCK SUSPENSIONS
Quality units with metal blocks. See Catalogue Appendix for actual sizes. (French suspensions, Suspensions)
FRENCH CLOCK SUSPENSION TYPE A 25 x 5mm.
FRENCH CLOCK SUSPENSION TYPE B 31 x 6mm.
FRENCH CLOCK SUSPENSION TYPE C 27 x 5mm.
FRENCH CLOCK SUSPENSION TYPE D 24 X 5mm.
FRENCH CLOCK SUSPENSION TYPE E 20 x 4mm.
FRENCH CLOCK SUSPENSION TYPE L 20 x 10mm.
FRENCH CLOCK SILK 1 metre coil of silk for French suspensions.

SUSPENSIONS FOR BRITISH/GERMAN CLOCKS, M N P &amp; Q
With metal blocks. Supplied complete with brass leader and rivet. Size of the leader: 60 x 5mm. Supplied in three easy to assemble parts. See Catalogue Appendix for actual sizes. (Suspensions)
BRITISH/GERMAN CLOCK SUSPENSION TYPE M 36 x 4mm.
BRITISH/GERMAN CLOCK SUSPENSION TYPE N 31 x 4mm.
BRITISH/GERMAN CLOCK SUSPENSION TYPE P 27 x 4mm.
BRITISH/GERMAN CLOCK SUSPENSION TYPE Q 21 x 4mm.

SUSPENSIONS FOR BRITISH &amp; GERMAN CLOCKS
High quality, with metal blocks. See Catalogue Appendix for actual sizes. (Suspensions)
BRITISH/GERMAN CLOCK SUSPENSION TYPE F 15 x 8mm.
BRITISH/GERMAN CLOCK SUSPENSION TYPE G 17 x 10mm.
BRITISH/GERMAN CLOCK SUSPENSION TYPE H 19 x 10mm.
BRITISH/GERMAN CLOCK SUSPENSION TYPE J 20 x 10mm.
BRITISH/GERMAN CLOCK SUSPENSION TYPE K 25 x 12mm.
BRITISH/GERMAN CLOCK SUSPENSION TYPE R 17 x 18mm.
BRITISH/GERMAN CLOCK SUSPENSION TYPE S 29 x 15mm.
SUSPENSION FOR URGOS CLOCK, SMALL 30 x 8mm.
SUSPENSION FOR URGOS CLOCK, LARGE 42 x 12mm.

CLOCK SUSPENSION STRIP
Coils of high grade hardened, tempered &amp; polished suspension steel s repairing and making suspensions. (Suspensions, Suspension steel)
CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.080mm
CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.100mm
CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.130mm
CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.145mm
CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.150mm
CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.155mm

CLOCK SUSPENSION SPRING STEEL ASSORTMENT
(Suspensions, Suspension steel assortment)
CLOCK SUSPENSION SPRING STEEL ASSORTMENT Assorted spring sheet for making unusual sizes. 8 pieces 60 x 60mm. 0.04mm-0.12mm thick.

FUSEE CLOCK SUSPENSION
(Fusee clock suspension, Suspensions)
FUSEE CLOCK SUSPENSION 63 x 5mm overall. Suspension steel spring, with one brass end. The spring steel fits into a slot in the top of the pendulum.

CLOCK SUSPENSION ASSORTMENT
(Suspensions)
CLOCK SUSPENSION ASSORTMENT Pack of 12 assorted popular suspensions for mass-produced French, German &amp; British clocks. All with metal blocks.

400 DAY SUSPENSIONS IN ASSORTMENTS
(400 Day suspensions)
400 DAY CLOCK SUSPENSION POPULAR ASSORTMENT Assortment contains the following sizes.
400 DAY CLOCK SUSPENSION INTERMEDIATE ASSORTMENT Assortment contains the following sizes.

400 DAY CLOCK SUSPENSION WIRES
(400 day suspensions, Anniversary suspensions, Suspensions, 400 day)
400 DAY CLOCK SUSPENSIONS .046mm Pack of 3 400 day wires. .046mm .0018"
400 DAY CLOCK SUSPENSIONS .048mm Pack of 3 400 day wires. .048mm .0019"
400 DAY CLOCK SUSPENSIONS .051mm Pack of 3 400 day wires. .051mm .0020"
400 DAY CLOCK SUSPENSIONS .053mm Pack of 3 400 day wires. .053mm .0021"
400 DAY CLOCK SUSPENSIONS .056mm Pack of 3 400 day wires. .056mm .0022"
400 DAY CLOCK SUSPENSIONS .058mm Pack of 3 400 day wires. .058mm .0023"
400 DAY CLOCK SUSPENSIONS .061mm Pack of 3 400 day wires. .061mm .0024"
400 DAY CLOCK SUSPENSIONS .064mm Pack of 3 400 day wires. .064mm .0025"
400 DAY CLOCK SUSPENSIONS .071mm Pack of 3 400 day wires. .071mm .0028"
400 DAY CLOCK SUSPENSIONS .076mm Pack of 3 400 day wires. .076mm .0030"
400 DAY CLOCK SUSPENSIONS .079mm Pack of 3 400 day wires. .079mm .0031"
400 DAY CLOCK SUSPENSIONS .081mm Pack of 3 400 day wires. .081mm .0032"
400 DAY CLOCK SUSPENSIONS .084mm Pack of 3 400 day wires. .084mm .0033"
400 DAY CLOCK SUSPENSIONS .086mm Pack of 3 400 day wires. .086mm .0034"
400 DAY CLOCK SUSPENSIONS .089mm Pack of 3 400 day wires. .089mm .0035"
400 DAY CLOCK SUSPENSIONS .091mm Pack of 3 400 day wires. .091mm .0036"
400 DAY CLOCK SUSPENSIONS .094mm Pack of 3 400 day wires. .094mm .0037"
400 DAY CLOCK SUSPENSIONS .097mm Pack of 3 400 day wires. .097mm .0038"
400 DAY CLOCK SUSPENSIONS .102mm Pack of 3 400 day wires. .102mm .0040"
400 DAY CLOCK SUSPENSIONS .11mm Pack of 12 400 day wires. .114mm .0045"
400 DAY CLOCK SUSPENSIONS .12mm Pack of 12 400 day wires. .127mm .0050"
400 DAY CLOCK SUSPENSIONS .14mm Pack of 12 400 day wires. .140mm .0055"
400 DAY CLOCK SUSPENSIONS .15mm Pack of 12 400 day wires. .152mm .0060"

400 DAY BLOCKS &amp; FORKS
(400 day suspensions, Anniversary suspensions)
FORKS &amp; BLOCKS Assorted top &amp; bottom blocks & forks for assembling suspension units Pack of 10.
400 DAY LOWER BRASS BLOCKS ASSORTMENT These tend to go missing first. 6pcs.

400 DAY BATTERY BOX
(400 day battery box, Battery box)
400 DAY BATTERY BOX For converting clocks that took the large 1.5v battery to take a modern 1400 (R14). Fits most models and has screw terminals for connection, as did the originals. Dimensions: 80mm x 100mm x 22mm.

400 DAY CLOCK SUSPENSION UNITS
(400 day suspensions, Anniversary suspensions, Suspensions)
400 DAY CLOCK SUSPENSION UNIT 1
400 DAY CLOCK SUSPENSION UNIT 3A
400 DAY CLOCK SUSPENSION UNIT 3B
400 DAY CLOCK SUSPENSION UNIT 3C
400 DAY CLOCK SUSPENSION UNIT 5A
400 DAY CLOCK SUSPENSION UNIT 5B
400 DAY CLOCK SUSPENSION UNIT 5E
400 DAY CLOCK SUSPENSION UNIT 5F
400 DAY CLOCK SUSPENSION UNIT 10A
400 DAY CLOCK SUSPENSION UNIT 10B
400 DAY CLOCK SUSPENSION UNIT 10C
400 DAY CLOCK SUSPENSION UNIT 11A
400 DAY CLOCK SUSPENSION UNIT 11B
400 DAY CLOCK SUSPENSION UNIT 12C
400 DAY CLOCK SUSPENSION UNIT 12D
400 DAY CLOCK SUSPENSION UNIT 12E
400 DAY CLOCK SUSPENSION UNIT 12F
400 DAY CLOCK SUSPENSION UNIT 13B
400 DAY CLOCK SUSPENSION UNIT 13C
400 DAY CLOCK SUSPENSION UNIT 14A
400 DAY CLOCK SUSPENSION UNIT 14B
400 DAY CLOCK SUSPENSION UNIT 16
400 DAY CLOCK SUSPENSION UNIT 18C
400 DAY CLOCK SUSPENSION UNIT 20A
400 DAY CLOCK SUSPENSION UNIT 20B
400 DAY CLOCK SUSPENSION UNIT 23A
400 DAY CLOCK SUSPENSION UNIT 23B
400 DAY CLOCK SUSPENSION UNIT 25A
400 DAY CLOCK SUSPENSION UNIT 25B
400 DAY CLOCK SUSPENSION UNIT 27A
400 DAY CLOCK SUSPENSION UNIT 27B
400 DAY CLOCK SUSPENSION UNIT 27C
400 DAY CLOCK SUSPENSION UNIT 28A
400 DAY CLOCK SUSPENSION UNIT 28B
400 DAY CLOCK SUSPENSION UNIT 28C
400 DAY CLOCK SUSPENSION UNIT 29A
400 DAY CLOCK SUSPENSION UNIT 29B
400 DAY CLOCK SUSPENSION UNIT 31
400 DAY CLOCK SUSPENSION UNIT 32
400 DAY CLOCK SUSPENSION UNIT 33
400 DAY CLOCK SUSPENSION UNIT 34
400 DAY CLOCK SUSPENSION UNIT 35
400 DAY CLOCK SUSPENSION UNIT 36B
400 DAY CLOCK SUSPENSION UNIT 38A
400 DAY CLOCK SUSPENSION UNIT 40B
400 DAY CLOCK SUSPENSION UNIT 41B
400 DAY CLOCK SUSPENSION UNIT 42A
400 DAY CLOCK SUSPENSION UNIT 43A
400 DAY CLOCK SUSPENSION UNIT 44A
400 DAY CLOCK SUSPENSION UNIT 45A
400 DAY CLOCK SUSPENSION UNIT 47
400 DAY CLOCK SUSPENSION UNIT 48B
400 DAY CLOCK SUSPENSION UNIT 49B
400 DAY CLOCK SUSPENSION UNIT 50B
400 DAY CLOCK SUSPENSION UNIT 51B
400 DAY CLOCK SUSPENSION UNIT 52B
400 DAY CLOCK SUSPENSION UNIT 53B
400 DAY CLOCK SUSPENSION UNIT 54B
400 DAY CLOCK SUSPENSION UNIT 55
400 DAY CLOCK SUSPENSION UNIT 56
400 DAY CLOCK SUSPENSION UNIT 57
400 DAY CLOCK SUSPENSION UNIT 58
400 DAY CLOCK SUSPENSION UNIT 59
400 DAY CLOCK SUSPENSION UNIT 60B
400 DAY CLOCK SUSPENSION UNIT 61B
400 DAY CLOCK SUSPENSION UNIT 63B
400 DAY CLOCK SUSPENSION UNIT 67B
400 DAY CLOCK SUSPENSION UNIT 68B
400 DAY CLOCK SUSPENSION UNIT 6789

WOODEN PENDULUM RODS &amp; BOBS
All parts sold individually. Select a suitable bob, then select its appropriate rod. Each rod needs a pack of fittings. (Pendulums)
BRASS FACED PENDULUM BOB 80mm Requires type A wooden rod.
BRASS FACED PENDULUM BOB 115mm Requires type A wooden rod.
BRASS FACED PENDULUM BOB 140mm Requires type B wooden rod.
BRASS FACED PENDULUM BOB 165mm Requires type B wooden rod.
WOODEN PENDULUM ROD TYPE A Suitable for 80, 100 &amp;115mm bobs. 950mm long, 19 x 6mm oval. Each rod requires a set of brass &amp; steel fittings sold separately.
WOODEN PENDULUM ROD TYPE B Suitable for 140 &amp; 165mm bobs. 950mm long, 25 x 7mm oval. Each rod requires a set of brass &amp; steel fittings sold separately.
FITTINGS - PENDULUM RODS A &amp; B

LONGCASE PENDULUMS
(Longcase pendulums, Pendulums, Invar rods, Rods)
LONGCASE PENDULUM MILD STEEL Mild steel rod 32". 3.12mm (1/8") diameter. 1/8" whitworth thread at both ends.
LONGCASE PENDULUM INVAR Invar rod 33". 3.12mm (1/8") diameter. 1/8" whitworth thread at both ends.
INVAR ROD Invar steel pendulum rods for regulators. Diameter : 6mm. Length : 1270mm. Unthreaded.

FLAT AND NUT FOR LONGCASE
(Flat &amp; nut, Longcase flat &amp; nut)
FLAT AND NUT FOR LONGCASE 1/8" whitworth. This screws to the lower end of the pendulum rod. The bob slides up and down, according to the position of the regulating nut.

LONGCASE BOBS
(Longcase bobs, Pendulums)
LEAD BOB FOR LONGCASE Diameter: 120mm.
BRASS FACED LEAD BOB FOR LONGCASE Diameter: 100 mm.

BLACK FOREST PENDULUMS
(Black Forest pendulums, Pendulums)
BLACK FOREST PENDULUM BOB 55mm Brass covered wooden bob.
BLACK FOREST PENDULUM BOB 70mm Brass covered wooden bob.
BLACK FOREST PENDULUM ROD 950mm Black steel. Bob not included.

CUCKOO CLOCK PENDULUMS
Carved wooden bob. Stained brown, with hook. Carving may vary. (Cuckoo pendulums, Pendulums)
CUCKOO CLOCK PENDULUM, SMALL 170mm long, 70mm wide.
CUCKOO CLOCK PENDULUM, MEDIUM 190mm long, 60mm wide.
CUCKOO CLOCK PENDULUM, LARGE 195mm long, 90mm wide.

FRENCH CLOCK PENDULUMS
Top of rod on standard rods is unthreaded, as this may need to be shortened. (French pendulums, Pendulums)
CHERUB CAST PENDULUM Width: 95mm. Height: 340mm. Weight: 225g.
EMPIRE PORTICO PENDULUM 160g Hook not included.
FRENCH CLOCK PENDULUM SIZE 0. Standard pendulum with turned brass bob and central rating nut. Hook not included. 1 1/4" diameter. 1 3/4 oz.
FRENCH CLOCK PENDULUM SIZE 1. Standard pendulum with turned brass bob and central rating nut. Hook not included. 1 3/8" diameter. 2 oz.
FRENCH CLOCK PENDULUM SIZE 2. Standard pendulum with turned brass bob and central rating nut. Hook not included. 1 1/2" diameter. 2 1/2 oz.
FRENCH CLOCK SILK PENDULUM Pendulum for silk suspension clock with wire hook.
FRENCH CLOCK PENDULUM HOOK Hook for No's 0-2 &amp; Sunburst.
BRONZE SUNBURST FOR FRENCH CLOCK, LARGE Hook not included. If a standard hook is used, you will need to reduce the diameter of the rod to enter the hook. 110mm Diameter. 21" Rod.
BRONZE SUNBURST FOR FRENCH CLOCK, SMALL If a standard hook is used, you will need to reduce the diameter of the rod to enter the hook. 60mm diameter, 9" rod.

AMERICAN PENDULUM BOBS
(American bobs, Pendulums)
AMERICAN PENDULUM BOB NO. 1 Diameter: 1 3/4". 2 1/2 oz. Adjustable, complete with wire &amp; rating nut.
AMERICAN PENDULUM BOB NO. 2 Diameter: 1 1/4". 1 1/2 oz. Unadjustable.
AMERICAN PENDULUM BOB NO. 3 Diameter: 1 1/2". 2 oz. Adjustable, complete with wire &amp; rating nut. The standard 30 hour bob.
AMERICAN PENDULUM BOB NO. 4 Diameter: 2". 3 oz. Adjustable, complete with wire &amp; rating nut. The standard 8 day bob.
FANCY AMERICAN PENDULUM A For kitchen clocks etc. Complete with original style rod. 155mm.
FANCY AMERICAN PENDULUM B For kitchen clocks etc. Complete with original style rod. 155mm.

AMERICAN BOB WIRES
Complete with rating nut. Length is overall length. (Bob wires)
AMERICAN BOB WIRE 2 3/4"
AMERICAN BOB WIRE 3 1/8"
AMERICAN BOB WIRE 4"

CAST BRASS BOB &amp; ROD ZAANDAM CLOCK
(Zaandam pendulums)
CAST BRASS BOB &amp; ROD ZAANDAM CLOCK Cast brass pendulum for Zaandam clocks, featuring a horse and rider. Bob is secured to the rod by a coiled friction spring. Brass rating nut. 40mm wide. 35mm high. Rod 215mm including integral hook. 33g.

AMERICAN BARREL PENDULUMS
(American barrel pendulums, Pendulums)
AMERICAN BARREL PENDULUM Single Barrel. Overall length 6 1/2".
AMERICAN BARREL PENDULUM Double Barrel. Overall length 7 1/2".

NAPOLEON PENDULUMS
(Napoleon bobs, Pendulums)
NAPOLEON PENDULUM BLANK TYPE Brass faced. 100g. 50mm diameter.
NAPOLEON PENDULUM SLOTTED TYPE For 'Enfield' and similar models. Slotted head type that hangs on a cross pin. 1 7/16" diameter, 2 3/4" long. 60g.

FUSEE PENDULUMS
All parts are sold separately. Suspension not included. (Fusee pendulums, Pendulums)
FUSEE PENDULUM BOB For use on office dial clocks etc. Lead filled pendulum bob for fusee &amp; bracket clocks. Both sides are faced with brass.
FUSEE PENDULUM ROD 7 3/4" The rod can be shortened if necessary. Length given is the total length.
FUSEE PENDULUM ROD 9 1/2" The rod can be shortened if necessary. Length given is the total length.
FUSEE PENDULUM ROD 10 1/2" The rod can be shortened if necessary. Length given is the total length.

GRID-IRON PENDULUMS
Brass with imitation enamel 'RA' bobs. (Grid-iron pendulums, Pendulums)
GRID-IRON PENDULUM 142mm 2 steel grids. 63mm bob.
GRID-IRON PENDULUM 180mm 2 steel grids. 63mm bob.
GRID-IRON PENDULUM 236mm 2 steel grids. 63mm bob.
GRID-IRON PENDULUM 305mm 4 steel grids. 80mm bob.
GRID-IRON PENDULUM 370mm 4 steel grids. 80mm bob.

BRASS RATING NUTS
(Rating nuts, Nuts)
BRASS RATING NUTS 1/2" square brass. Pilot hole provided for tapping with the appropriate thread. Packs of 3.

MORBIER BRASS BOBS &amp; RODS
Brass pendulum bobs. Supplied with foldable rods. (Morbier bobs, Comtoise bobs)
MORBIER BRASS BOB 130mm With rod. Unpolished. 180g.
MORBIER BRASS BOB 155mm With rod. Unpolished. 230g.

ROI SOLEIL 'SUNBURST' PENDULUM BOB &amp; ROD
Brass pendulum bobs. Supplied with foldable rod. (Sunburst pendulums, Pendulums, Roi Soleil, French pendulums)
SUNBURST PENDULUM 125mm BOB &amp; ROD Polished. 190g.
SUNBURST PENDULUM 155mm BOB &amp; ROD Polished. 240g.

MOREZ LEAD PENDULUM AND ROD
(Morez pendulums, Pendulums)
MOREZ LEAD PENDULUM AND ROD 240g Antique finish (i.e. rod is rusty).
MORBIER LEAD PENDULUM 215g Hand made. Antique finish (i.e. rod is rusty).
MORBIER LEAD PENDULUM 215g Hand made. Antique finish (i.e. rod is rusty).

LYRE PENDULUMS
Antique finish. Unpolished bob. (Lyre pendulums, Pendulums)
7 STRAIGHT RODS LYRE PENDULUM 240mm BOB 750g. 97cm.
7 TWISTED RODS LYRE PENDULUM 240mm BOB 750g. 97cm.
9 STRAIGHT RODS LYRE PENDULUM 270mm BOB 1000g. 105cm.
9 TWISTED RODS LYRE PENDULUM 270mm BOB 1000g. 105cm.

MORBIER EMBOSSED PENDULUMS
Pressed (repousse) Morbier pendulums. Beautifully stamped items. Antique finish comes as standard, ready to be fitted to the clock. Colour hand painted versions available too. Total length 105cm. Weight approx 750g. (Morbier bobs, Pendulums)
MORBIER EMBOSSED PENDULUM, BOUQUET 1
MORBIER EMBOSSED PENDULUM, FLOWERS &amp; CORN
MORBIER EMBOSSED PENDULUM, BOUQUET 2
MORBIER EMBOSSED PENDULUM, THE FARM
MORBIER EMBOSSED PENDULUM, GRAPE HARVEST
MORBIER EMBOSSED PENDULUM, THE LOVERS
MORBIER EMBOSSED PENDULUM, SUNBURST

AUTOMATED MORBIER PENDULUMS
Similar to our range of pressed Morbier pendulums. When the pendulum swings, the character or scene on the bob moves. (Morbier bobs, Pendulums)
AUTOMATED PENDULUM, ARTIST
AUTOMATED PENDULUM, DANCER
AUTOMATED PENDULUM, HORSE VEHICLE
AUTOMATED PENDULUM, HUNTER
AUTOMATED PENDULUM, DRINKER
AUTOMATED PENDULUM, HARVESTER
AUTOMATED PENDULUM, VINTAGE

MERCURY PENDULUMS
We also stock a range of empty glass tubes for these pendulums. (Mercury pendulums, Pendulums)
MERCURY PENDULUM Imitation mercury rods.

PENDULUM BOB, WITH R &amp; A
(Pendulums)
PENDULUM BOB, BRASS WITH R &amp; A 80mm

BACK COCKS
Well constructed longcase back cocks. Brass. Suspension slot cut, with curved suspension seat. Not castings, but made from solid brass. (Back cocks, Longcase back cocks)
LONGCASE BACK COCK, SINGLE ARM. For early clocks. 35mm between hole centres. Arm 38mm. Pivot hole 13mm from plate face.
LONGCASE BACK COCK, TWIN ARM. For later clocks. 42mm between hole centres. Arm 44mm. Pivot hole 15mm from plate face.

LONGCASE HOUR BRIDGES
(Longcase hour bridge, Hour bridge, Cannon pinion bridge, Bridge)
LONGCASE HOUR OR CANNON PINION BRIDGE 57mm between fixing hole centres. 9mm tube with 6.25mm hole. 34mm from plate face to end of tube. 8mmm x 38mm shoulder space.

PLATFORM ESCAPEMENTS
Very high quality Swiss escapements. Fitted with 8 leaf escapements. Fully jewelled. See Catalogue Appendix for more information. (Platforms, Escapements)
PLATFORM ESCAPEMENT TYPE A 18 x 28mm Usable pinion depth below platform between 1-4mm The pinion pivot is located centrally, 5.5mm from front edge. Module 0.219
PLATFORM ESCAPEMENT TYPE C 25 x 36mm Usable pinion depth below platform between 1-7mm The pinion pivot is located centrally, 9mm from front edge. Module 0.250
PLATFORM ESCAPEMENT TYPE D 24 x 44mm Usable pinion depth below platform between 1-5mm The pinion pivot is located centrally, 12mm from front edge. Module 0.250
PLATFORM ESCAPEMENT TYPE E 30 x 41mm Usable pinion depth below platform between 1-7mm The pinion pivot is located centrally, 10mm from front edge. Module 0.250
PLATFORM ESCAPEMENT TYPE F 23 x 36mm Usable pinion depth below platform between 1-7mm The pinion pivot is located centrally, 9mm from front edge. Module 0.250
PLATFORM ESCAPEMENT TYPE H 34 x 45.3mm Usable pinion depth below platform between 1-7mm The pinion pivot is located centrally, 10.0mm from front edge. Module 0.250

PLATFORM ESCAPE WHEELS
These only fit new platforms, supplied by us. They will not fit any older units. (Escape wheels, Platform parts)
PLATFORM ESCAPE WHEEL 6 LEAF. TYPE A Module 0.219. External diameter 1.981mm. Pitch diameter 1.752mm.
PLATFORM ESCAPE WHEEL 7 LEAF. TYPE A
PLATFORM ESCAPE WHEEL 8 LEAF. TYPE A
PLATFORM ESCAPE WHEEL 6 LEAF. TYPE C-H
PLATFORM ESCAPE WHEEL 7 LEAF. TYPE C-H
PLATFORM ESCAPE WHEEL 8 LEAF. TYPE C-H
PLATFORM ESCAPE WHEEL 9 LEAF. TYPE C-H

PLATFORM BALANCES
These will only fit new platforms, supplied by us. (Balances, Platform parts)
PLATFORM BALANCE COMPLETE - TYPE A
PLATFORM BALANCE COMPLETE - TYPE C-H

PLATFORM LEVERS
These will only fit new platforms supplied by us. (Levers, Platform parts)
PLATFORM LEVER FOR TYPE A
PLATFORM LEVER FOR TYPE C-H

PLATFORM RETAINING WASHERS
Domed washers (Platform washers, Washers)
DOMED RETAINING WASHERS Platform location is critical. These facilitate final adjustments. Blue steel. 36pcs.

PLATFORM FIXING SCREWS
A compartmented box containing 50 blued steel screws specially made for fixing platform escapements. Includes a small quantity of retaining washers. (Platform fixing screws)
PLATFORM FIXING SCREW SET Assorted metric sizes. 50pcs. 10 of each of 1.0mm, 1.20mm, 1.40mm, 1.60mm and 1.80mm. Includes a small quantity of domed washers.
PLATFORM FIXING SCREWS 1.00mm Pack of 10.
PLATFORM FIXING SCREWS 1.20mm Pack of 10.
PLATFORM FIXING SCREWS 1.40mm Pack of 10.
PLATFORM FIXING SCREWS 1.60mm Pack of 10.
PLATFORM FIXING SCREWS 1.80mm Pack of 10.

The Striking Mechanism

LONGCASE BELL STAND &amp; NUT
(Longcase bell stands, Bell stands)
LONGCASE BELL STAND &amp; NUT 5" overall length. 3" steel shaft. Brass nut.

LONGCASE GATHERING PALLETS
Two types exist. The type is dependant on the rack design. Check if the pin on the rack that the pallet locks onto is on the FRONT or REAR of the rack. (Gathering pallets)
LONGCASE GATHERING PALLET, FRONT The tail of the front (left) pallet locks in front of the rack.
LONGCASE GATHERING PALLET, REAR The tail of the rear (right) pallet locks to the rear of the rack.

LONGCASE BELL HAMMER
(Bell hammers)
LONGCASE BELL HAMMER Steel. 85mm from hole to centre of hammer head.

LONGCASE RACK PARTS
(Longcase racks)
LONGCASE RACK SPRING
LONGCASE RACK BLANK Steel
LONGCASE RACK COMPLETE A pre-cut and assembled rack that saves all the work involved with an ordinary rack blank. Made from 1mm thick steel with brass pipe and lever. Locking pin fitted. Distance from pipe centre to the tips of teeth is 60mm.

LONGCASE &amp; FUSEE FLY BLANK
(Fly blanks)
LONGCASE &amp; FUSEE FLY BLANK Brass, ready for finishing. 42mm x 29mm.
LONGCASE &amp; FUSEE FLY BLANK Brass, ready for finishing. 38mm x 26mm.

LONGCASE BELL HAMMER SPRING
(Bell hammer spring)
LONGCASE BELL HAMMER SPRING Complete with screw.

FRENCH GONG HAMMER ASSEMBLY
(Gong hammers)
FRENCH GONG HAMMER ASSEMBLY Brass. Also suits most mass-produced German clocks. 60mm long.

FRENCH CLOCK BELL STAND &amp; NUT
(Frech bell stand, Bell stands)
FRENCH CLOCK BELL STAND &amp; NUT Brass

FRENCH CLOCK BELL NUT
(Bell nuts)
FRENCH CLOCK BELL NUT No thread. Ready for tapping.

FRENCH BELL HAMMER
(Bell hammers)
FRENCH BELL HAMMER All brass construction

CAST CLOCK BELL
High quality. Shotblast. (Bells, Cast bells)
CAST CLOCK BELL 3 1/2"
CAST CLOCK BELL 4 3/8"
CAST CLOCK BELL 5 1/2"

CAST CLOCK BELL
Polished and silver plated. For French clocks. (Bells, Cast bells)
CAST CLOCK BELL 1 1/2"
CAST CLOCK BELL 2"
CAST CLOCK BELL 2 1/2"

PRESSED BRASS BELLS
An economic alternative to cast bells. We try to obtain bells as described but from time to time the sizes may vary slightly. (Bells, Pressed bells)
PRESSED BRASS BELL 44mm
PRESSED BRASS BELL 51mm
PRESSED BRASS BELL 60mm
PRESSED BRASS BELL 70mm An economic alternative to cast bells.
PRESSED BRASS BELL 85mm
PRESSED BRASS BELL 100mm
PRESSED STEEL BELL 125mm High dome for Comtoise etc. 125mm diameter. 47mm high.

CAST BELL FOR COMTOISE
High quality bells, cast from bell metal. Smooth but not polished, just like the originals. Superb sound. Height 45mm. (Bells, Comtoise bells, Morbier bells)
CAST BELL 120mm COMTOISE
CAST BELL 140mm COMTOISE

ECONOMY CAST CLOCK BELLS
Cast from brass, not bell metal. (Bells)
CAST CLOCK BELL 2" (50mm) diameter. Centre hole drilled. Height 14mm.
CAST CLOCK BELL 2 1/4" (55mm) diameter. Centre hole drilled. Height 18mm.
CAST CLOCK BELL 5" (125mm) diameter. Centre hole drilled. Height 40mm.

ALARM PARTS
(American alarms)
ALARM MECHANISM FOR AMERICAN CLOCKS An accurate copy of the original, supplied complete with hammer and dial centre piece. Alarm trip