M&P: Clockmakers Supplies        
Enter the word you want to search for:

Exact Match Search
Home
Home
Store
Store
Catalogue
Catalogue
Index
Index

M&P Clock parts: Grandfather strike parts

You may be interested in these associated pages:
Bells | Misc striking parts | Gong rods | Repair books |

You can see these specific products listed in our Online Store at www.medmaw.com.



LONGCASE BELL STAND & NUT
(Longcase bell stands, Bell stands)

LONGCASE BELL STAND & NUT LONGCASE BELL STAND & NUT (0281 000115) 5inch overall length. 3inch steel shaft. Brass nut.


LONGCASE GATHERING PALLETS
Two types exist. The type is dependant on the rack design. Check if the pin on the rack that the pallet locks onto is on the FRONT or REAR of the rack - Casting Only - Filing and drilling needed. (Gathering pallets)

LONGCASE GATHERING PALLET FORGING, FRONT LONGCASE GATHERING PALLET FORGING, FRONT (0266 100115) The tail of the front (left) pallet locks in front of the rack. This is a blank ready for finishing with no hole placed.

LONGCASE GATHERING PALLET FORGING, REAR LONGCASE GATHERING PALLET FORGING, REAR (0267 100115) The tail of the rear (right) pallet locks to the rear of the rack. This is a blank ready for finishing with no hole placed.


LONGCASE BELL HAMMER
(Bell hammers)

LONGCASE BELL HAMMER LONGCASE BELL HAMMER (0282 000115) Steel. 85mm from hole to centre of hammer head.


LONGCASE RACK PARTS
(Longcase racks)

LONGCASE RACK SPRING LONGCASE RACK SPRING (0268 000115)

LONGCASE RACK BLANK LONGCASE RACK BLANK (0269 000115) Steel. Teeth are pre-cut. Width 54mm. Total length including tail 79mm. Tips of teeth are 2.8mm apart. Thickness 1mm. No holes drilled. Locking pin not included.

LONGCASE RACK COMPLETE LONGCASE RACK COMPLETE (0269 000215) A pre-cut and assembled rack that saves all the work involved with an ordinary rack blank. Made from 1mm thick steel with brass pipe and lever. Locking pin fitted plus stud. Distance from pipe centre to the tips of teeth is 60mm.


LONGCASE & FUSEE FLY BLANK
(Fly blanks, Governors)

LONGCASE & FUSEE FLY BLANK LONGCASE & FUSEE FLY BLANK (0466 000115) Brass, ready for finishing. 42mm x 29mm.

LONGCASE & FUSEE FLY BLANK LONGCASE & FUSEE FLY BLANK (0466 000215) Brass, ready for finishing. 38mm x 26mm.


LONGCASE BELL HAMMER SPRING
(Bell hammer spring)

LONGCASE BELL HAMMER SPRING LONGCASE BELL HAMMER SPRING (0283 000115) Complete with screw.


CAST CLOCK BELL
High quality. Shotblast. (Bells, Cast bells)

CAST CLOCK BELL CAST CLOCK BELL (0280 031215) Diameter: 3 1/2inch / 89mm, height 1 3/8inch / 35mm (approx).

CAST CLOCK BELL CAST CLOCK BELL (0280 043815) Diameter: 4 1/2inch / 114mm, height 1 3/8inch / 35mm (approx).

CAST CLOCK BELL CAST CLOCK BELL (0280 051215) Diameter: 5 1/2inch / 140mm, height 1 3/8inch / 35mm (approx).


LONGCASE STUDS
Turned from solid 6mm steel. Threaded with 3BA. All sizes have 22mm long usable shaft. (Longcase studs, Studs, Rack studs)

MINUTE WHEEL STUD MINUTE WHEEL STUD (1459 000115) Shaft diameter 2.4mm. Shoulder depth 2.4mm.

RACK HOOK & LIFTING PIECE STUD RACK HOOK & LIFTING PIECE STUD (1459 000215) Shaft diameter 3.1mm. Shoulder depth 4.0mm.

RACK STUD RACK STUD (1459 000315) Shaft diameter 3.1mm. Shoulder depth 4.8mm.


We have more products, please view the list of Categories
You may be interested in these associated pages:
Bells | Misc striking parts | Gong rods | Repair books |

You can see these specific products listed in our Online Store at www.medmaw.com.




Click a link to find out more information about any product.
Home
Home
Store
Store
Catalogue
Catalogue
Index
Index


         

©2005 M&P, All rights reserved.

Valid HTML 4.01 Transitional