M&P: Clockmakers Supplies        
Enter the word you want to search for:

Exact Match Search
Home
Home
Store
Store
Catalogue
Catalogue
Index
Index

M&P Clock parts: Suspensions

You may be interested in these associated pages:
Suspensions for 400 day clocks | Pendulums, Grandfather clocks | Pendulums for French clocks | Clock pins |

You can see these specific products listed in our Online Store at www.medmaw.com.



CLOCK JEWEL BARS
(Jewel bars, Elephant bars)

CLOCK JEWEL BARS CLOCK JEWEL BARS (0984 000115) Also known as 'Elephant bars' they support swinging arms on clocks. Solid brass bar with 2 jewels in the top. Overall length 27mm, excluding the 15mm of threaded shaft. Distance between centres 18mm.


FLOATING BALANCE WIRE
(Balance wire, Floating balance wire)

FLOATING BALANCE WIRE FLOATING BALANCE WIRE (0641 000115) 1m. coil of 0.2mm floating balance wire. This is the suspension wire, not the coiled spring.


PENDULUM LEADERS
(Pendulum leaders, Leaders)

PENDULUM LEADER TYPE A PENDULUM LEADER TYPE A (0561 013415) Easily shortened or modified. 134mm from hook to pin. Steel. 5mm wide, 1mm thick. Pendulum pin at bottom.

BLANK BRASS LEADER BLANK BRASS LEADER (0561 000115) Hard, flat brass piece for making your own pendulum leader. 200mm x 12mm x 1mm approx.


SUSPENSION RODS FOR AMERICAN & GERMAN CLOCKS
All sizes approximate. (Suspension rod, American suspensions)

SUSPENSION FOR AMERICAN & GERMAN CLOCKS, RIVETTED 16INCH SUSPENSION FOR AMERICAN & GERMAN CLOCKS, RIVETTED 16INCH (0239 000115) The suspension is riveted to the end of the wire. Length includes suspension.

SUSPENSION FOR AMERICAN & GERMAN CLOCKS, IN ONE PIECE SUSPENSION FOR AMERICAN & GERMAN CLOCKS, IN ONE PIECE (0239 000315) 24inch / 600mm total length. The suspension has been made by flattening the wire. Hammered end.

AMERICAN SUSPENSION T TYPE HANGER - STRAIGHT AMERICAN SUSPENSION T TYPE HANGER - STRAIGHT (0239 000415) 12inch / 300mm total length.

AMERICAN SUSPENSION T TYPE HANGER - BENT AMERICAN SUSPENSION T TYPE HANGER - BENT (0239 000515) 12 1/4inch / 315mm total length.


LONGCASE CLOCK SUSPENSIONS
(Longcase suspensions, Suspensions)

LONGCASE SINGLE ENDED CLOCK SUSPENSION LONGCASE SINGLE ENDED CLOCK SUSPENSION (0270 000115) This is intended as a replacement for an existing pendulum that still has the brass block at the top of the rod.

LONGCASE DOUBLE ENDED CLOCK SUSPENSION: 116mm long excluding block. LONGCASE DOUBLE ENDED CLOCK SUSPENSION: 116mm long excluding block. (0271 000115) 1/8inch Whitworth thread. This is normally used when making up a complete pendulum. It comes complete with the lower brass block that screws onto the top of the steel rod. Brass block dimensions: 4.7mm x 9.5mm x 26mm. Sizes approx.


FRENCH CLOCK SUSPENSIONS
Standard quality units with metal blocks. See catalogue appendix for actual sizes. (French suspensions, Suspensions)

FRENCH CLOCK SUSPENSION TYPE A FRENCH CLOCK SUSPENSION TYPE A (0297 000115) 25 x 5mm. European made.

FRENCH CLOCK SUSPENSION TYPE B FRENCH CLOCK SUSPENSION TYPE B (0298 000115) 31 x 6mm. European made.

FRENCH CLOCK SUSPENSION TYPE C FRENCH CLOCK SUSPENSION TYPE C (0299 000115) 27 x 5mm. European made.

FRENCH CLOCK SUSPENSION TYPE D FRENCH CLOCK SUSPENSION TYPE D (0347 000115) 24 X 5mm. European made.

FRENCH CLOCK SUSPENSION TYPE E FRENCH CLOCK SUSPENSION TYPE E (0300 000115) 20 x 4mm. European made.

FRENCH CLOCK SUSPENSION TYPE L FRENCH CLOCK SUSPENSION TYPE L (0513 000115) 20 x 10mm.

FRENCH CLOCK SUSPENSION TYPE V FRENCH CLOCK SUSPENSION TYPE V (1310 004615) 22 x 5mm.

FRENCH CLOCK SUSPENSION TYPE X FRENCH CLOCK SUSPENSION TYPE X (1310 000715) 18 x 5mm.

FRENCH CLOCK SUSPENSION TYPE Z FRENCH CLOCK SUSPENSION TYPE Z (1310 005215) 22 x 5mm.

FRENCH CLOCK SILK FRENCH CLOCK SILK (0514 000115) 1 metre coil of silk for French suspensions.


SUSPENSIONS FOR BRITISH/GERMAN CLOCKS, M N P & Q
With metal blocks. Supplied complete with brass leader and rivet. Size of the leader: 60 x 5mm. Supplied in three easy to assemble parts. See Catalogue Appendix for actual sizes. (Suspensions)

BRITISH/GERMAN CLOCK SUSPENSION TYPE M BRITISH/GERMAN CLOCK SUSPENSION TYPE M (0560 000115) 36 x 4mm.

BRITISH/GERMAN CLOCK SUSPENSION TYPE N BRITISH/GERMAN CLOCK SUSPENSION TYPE N (0560 000215) 31 x 4mm.

BRITISH/GERMAN CLOCK SUSPENSION TYPE P BRITISH/GERMAN CLOCK SUSPENSION TYPE P (0560 000315) 27 x 4mm.

BRITISH/GERMAN CLOCK SUSPENSION TYPE Q BRITISH/GERMAN CLOCK SUSPENSION TYPE Q (0560 000415) 21 x 4mm.


SUSPENSIONS FOR BRITISH & GERMAN CLOCKS
High quality, with metal blocks. See Catalogue Appendix for actual sizes. (Suspensions)

BRITISH/GERMAN CLOCK SUSPENSION TYPE F. BRITISH/GERMAN CLOCK SUSPENSION TYPE F. (0336 000115) 15 x 8mm.

BRITISH/GERMAN CLOCK SUSPENSION TYPE G. BRITISH/GERMAN CLOCK SUSPENSION TYPE G. (0337 000115) 17 x 10mm.

BRITISH/GERMAN CLOCK SUSPENSION TYPE H. BRITISH/GERMAN CLOCK SUSPENSION TYPE H. (0338 000115) 19 x 10mm.

BRITISH/GERMAN CLOCK SUSPENSION TYPE J. BRITISH/GERMAN CLOCK SUSPENSION TYPE J. (0339 000115) 20 x 10mm.

BRITISH/GERMAN CLOCK SUSPENSION TYPE K. BRITISH/GERMAN CLOCK SUSPENSION TYPE K. (0340 000115) 25 x 12mm.

BRITISH/GERMAN CLOCK SUSPENSION TYPE R BRITISH/GERMAN CLOCK SUSPENSION TYPE R (0672 000115) 16 x 17mm. Suitable for Kundo ATO battery clocks.

BRITISH/GERMAN CLOCK SUSPENSION TYPE S BRITISH/GERMAN CLOCK SUSPENSION TYPE S (0925 000115) 29 x 15mm.

SUSPENSION FOR URGOS CLOCK, SMALL. TYPE T SUSPENSION FOR URGOS CLOCK, SMALL. TYPE T (1089 000115) 30 x 8mm.

SUSPENSION FOR URGOS CLOCK, LARGE. TYPE U SUSPENSION FOR URGOS CLOCK, LARGE. TYPE U (1089 000215) 42 x 12mm.


SUSPENSION FOR BULLE CLOCK
(Bulle clock, Suspensions, Ribbon)

SUSPENSION RIBBON FOR BULLE CLOCK SUSPENSION RIBBON FOR BULLE CLOCK (1602 000115) 2 strips, 1 white and 1 black, 30cm approx.


CLOCK SUSPENSION ASSORTMENT
(Suspensions)

CLOCK SUSPENSION ASSORTMENT CLOCK SUSPENSION ASSORTMENT (0640 001215) Pack of 12 assorted popular suspensions for mass-produced French, German & British clocks. All with metal blocks.

FRENCH CLOCK SUSPENSION ASSORTMENT FRENCH CLOCK SUSPENSION ASSORTMENT (0640 000506) For French clocks. Pack of 5.

GERMAN CLOCK SUSPENSION ASSORTMENT GERMAN CLOCK SUSPENSION ASSORTMENT (0640 000507) For German and British clocks. Pack of 5.


CLOCK SUSPENSION STRIP
Coils of high grade hardened, tempered & polished suspension steel spring, f repairing and making suspensions. (Suspensions, Suspension steel)

CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.080mm CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.080mm (1411 608015)

CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.100mm CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.100mm (1411 610015)

CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.130mm CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.130mm (1411 613015)

CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.145mm CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.145mm (1411 614515)

CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.150mm CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.150mm (1411 615015)

CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.155mm CLOCK SUSPENSION STRIP 1 metre. 6.0mm x 0.155mm (1411 615515)


CLOCK SUSPENSION SPRING STEEL ASSORTMENT
(Suspensions, Suspension steel assortment)

CLOCK SUSPENSION SPRING STEEL ASSORTMENT CLOCK SUSPENSION SPRING STEEL ASSORTMENT (0626 000815) Assorted spring sheet for making unusual sizes. 8 pieces 60 x 60mm. 0.04mm-0.12mm thick.


FUSEE CLOCK SUSPENSION
(See catalogue appendix for actual sizes) (Fusee clock suspension, Suspensions)

FUSEE CLOCK SUSPENSION TYPE AA FUSEE CLOCK SUSPENSION TYPE AA (0319 000115) 63 x 6mm overall. Suspension steel spring, with one brass end. The spring steel fits into a slot in the top of the pendulum.


BRILLIE SUSPENSION
(Brillie, Suspension)

BRILLIE SUSPENSION SPRING BRILLIE SUSPENSION SPRING (1318 000115) 19 x 12mm. Holes: 12mm apart, 1.25mm wide. 2 x pins: 1.25mm wide, 9mm long.


400 DAY SUSPENSIONS IN ASSORTMENTS
(400 day suspensions, Anniversary clock suspensions)

400 DAY CLOCK SUSPENSION POPULAR ASSORTMENT 400 DAY CLOCK SUSPENSION POPULAR ASSORTMENT (0401 000115) Assortment contains the following sizes.

400 DAY CLOCK SUSPENSION INTERMEDIATE ASSORTMENT 400 DAY CLOCK SUSPENSION INTERMEDIATE ASSORTMENT (0401 000215) Assortment contains the following sizes.


400 DAY CLOCK SUSPENSION WIRES
Available in a range of thicknesses. Length 140mm. Width 0.5mm (400 day suspensions, Anniversary suspensions, Suspensions, 400 day)

400 DAY CLOCK SUSPENSIONS .046mm 400 DAY CLOCK SUSPENSIONS .046mm (0401 001815) Pack of 3 400 day wires. .046mm .0018inch

400 DAY CLOCK SUSPENSIONS .048mm 400 DAY CLOCK SUSPENSIONS .048mm (0401 001915) Pack of 3 400 day wires. .048mm .0019inch

400 DAY CLOCK SUSPENSIONS .051mm 400 DAY CLOCK SUSPENSIONS .051mm (0401 002015) Pack of 3 400 day wires. .051mm .0020inch

400 DAY CLOCK SUSPENSIONS .053mm 400 DAY CLOCK SUSPENSIONS .053mm (0401 002115) Pack of 3 400 day wires. .053mm .0021inch

400 DAY CLOCK SUSPENSIONS .056mm 400 DAY CLOCK SUSPENSIONS .056mm (0401 002215) Pack of 3 400 day wires. .056mm .0022inch

400 DAY CLOCK SUSPENSIONS .058mm 400 DAY CLOCK SUSPENSIONS .058mm (0401 002315) Pack of 3 400 day wires. .058mm .0023inch

400 DAY CLOCK SUSPENSIONS .061mm 400 DAY CLOCK SUSPENSIONS .061mm (0401 002415) Pack of 3 400 day wires. .061mm .0024inch

400 DAY CLOCK SUSPENSIONS .064mm 400 DAY CLOCK SUSPENSIONS .064mm (0401 002515) Pack of 3 400 day wires. .064mm .0025inch

400 DAY CLOCK SUSPENSIONS .071mm 400 DAY CLOCK SUSPENSIONS .071mm (0401 002815) Pack of 3 400 day wires. .071mm .0028inch

400 DAY CLOCK SUSPENSIONS .076mm 400 DAY CLOCK SUSPENSIONS .076mm (0401 003015) Pack of 3 400 day wires. .076mm .0030inch

400 DAY CLOCK SUSPENSIONS .079mm 400 DAY CLOCK SUSPENSIONS .079mm (0401 003115) Pack of 3 400 day wires. .079mm .0031inch

400 DAY CLOCK SUSPENSIONS .081mm 400 DAY CLOCK SUSPENSIONS .081mm (0401 003215) Pack of 3 400 day wires. .081mm .0032inch

400 DAY CLOCK SUSPENSIONS .084mm 400 DAY CLOCK SUSPENSIONS .084mm (0401 003315) Pack of 3 400 day wires. .084mm .0033inch

400 DAY CLOCK SUSPENSIONS .086mm 400 DAY CLOCK SUSPENSIONS .086mm (0401 003415) Pack of 3 400 day wires. .086mm .0034inch

400 DAY CLOCK SUSPENSIONS .089mm 400 DAY CLOCK SUSPENSIONS .089mm (0401 003515) Pack of 3 400 day wires. .089mm .0035inch

400 DAY CLOCK SUSPENSIONS .091mm 400 DAY CLOCK SUSPENSIONS .091mm (0401 003615) Pack of 3 400 day wires. .091mm .0036inch

400 DAY CLOCK SUSPENSIONS .094mm 400 DAY CLOCK SUSPENSIONS .094mm (0401 003715) Pack of 3 400 day wires. .094mm .0037inch

400 DAY CLOCK SUSPENSIONS .097mm 400 DAY CLOCK SUSPENSIONS .097mm (0401 003815) Pack of 3 400 day wires. .097mm .0038inch

400 DAY CLOCK SUSPENSIONS .102mm 400 DAY CLOCK SUSPENSIONS .102mm (0401 004015) Pack of 3 400 day wires. .102mm .0040inch

400 DAY CLOCK SUSPENSIONS .11mm 400 DAY CLOCK SUSPENSIONS .11mm (0401 004515) Pack of 12 400 day wires. .114mm .0045inch

400 DAY CLOCK SUSPENSIONS .12mm 400 DAY CLOCK SUSPENSIONS .12mm (0401 005015) Pack of 12 400 day wires. .127mm .0050inch

400 DAY CLOCK SUSPENSIONS .14mm 400 DAY CLOCK SUSPENSIONS .14mm (0401 005515) Pack of 12 400 day wires. .140mm .0055inch

400 DAY CLOCK SUSPENSIONS .15mm 400 DAY CLOCK SUSPENSIONS .15mm (0401 006015) Pack of 12 400 day wires. .152mm .0060inch


SUSPENSION RANGE
(Suspension)

SUSPENSION I - 002 SUSPENSION I - 002 (1322 000215) 15mm x 9mm

SUSPENSION I - 005 SUSPENSION I - 005 (1322 000515) 18mm x 9mm

SUSPENSION I - 015 SUSPENSION I - 015 (1322 001515) 17mm x 8mm

SUSPENSION I - 016 SUSPENSION I - 016 (1322 001615) 16mm x 9mm

SUSPENSION I - 017 SUSPENSION I - 017 (1322 001715) 18mm x 8mm

SUSPENSION I - 018 SUSPENSION I - 018 (1322 001815) 21mm x 7mm

SUSPENSION I - 019 SUSPENSION I - 019 (1322 001915) 18mm x 7mm

SUSPENSION I - 020 SUSPENSION I - 020 (1322 002015) 23mm x 9mm

SUSPENSION I - 022 SUSPENSION I - 022 (1322 002215) 16mm x 11mm

SUSPENSION I - 023 SUSPENSION I - 023 (1322 002315) 18mm x 11mm

SUSPENSION I - 024 SUSPENSION I - 024 (1322 002415) 18mm x 11mm

SUSPENSION I - 025 SUSPENSION I - 025 (1322 002515) 19mm x 11mm

SUSPENSION I - 026 SUSPENSION I - 026 (1322 002615) 20mm x 11mm

SUSPENSION I - 027 SUSPENSION I - 027 (1322 002715) 21mm x 11mm

SUSPENSION I - 028 SUSPENSION I - 028 (1322 002815) 22mm x 10mm

SUSPENSION I - 029 SUSPENSION I - 029 (1322 002915) 17mm x 6mm

SUSPENSION I - 030 SUSPENSION I - 030 (1322 003015) 19mm x 6mm

SUSPENSION I - 031 SUSPENSION I - 031 (1322 003115) 23mm x 9mm

SUSPENSION I - 032 SUSPENSION I - 032 (1322 003215) 24mm x 10mm

SUSPENSION I - 033 SUSPENSION I - 033 (1322 003315) 23mm x 11mm

SUSPENSION I - 036 SUSPENSION I - 036 (1322 003615) 24mm x 5mm

SUSPENSION I - 037 SUSPENSION I - 037 (1322 003715) 42mm x 6mm

SUSPENSION I - 039 SUSPENSION I - 039 (1322 003915) 24mm x 12mm

SUSPENSION I - 041 SUSPENSION I - 041 (1322 004115) 22mm x 11mm

SUSPENSION I - 042 SUSPENSION I - 042 (1322 004215) 25mm x 11mm

SUSPENSION I - 044 SUSPENSION I - 044 (1322 004415) 30mm x 13mm

SUSPENSION I - 045 SUSPENSION I - 045 (1322 004515) 34mm x 13mm

SUSPENSION I - 047 SUSPENSION I - 047 (1322 004715) 17mm x 7mm

SUSPENSION I - 048 SUSPENSION I - 048 (1322 004815) 30mm x 15mm

SUSPENSION I - 049 SUSPENSION I - 049 (1322 004915) 16mm x 6mm

SUSPENSION I - 050 SUSPENSION I - 050 (1322 005015) 51mm x 6mm

SUSPENSION I - 053 SUSPENSION I - 053 (1322 005315) 15mm x 6mm

SUSPENSION I - 054 SUSPENSION I - 054 (1322 005415) 15mm x 7mm

SUSPENSION I - 060 SUSPENSION I - 060 (1322 006015) 26mm x 12mm

SUSPENSION I - 061 SUSPENSION I - 061 (1322 006115) 18mm x 8mm

SUSPENSION I - 063 SUSPENSION I - 063 (1322 006315) 18mm x 7mm

SUSPENSION I - 064 SUSPENSION I - 064 (1322 006415) 18mm x 8mm

SUSPENSION I - 065 SUSPENSION I - 065 (1322 006515) 20mm x 9mm

SUSPENSION I - 068 SUSPENSION I - 068 (1322 006815) 15mm x 7mm

SUSPENSION I - 040 SUSPENSION I - 040 (1322 004015) 20mm x 11mm

SUSPENSION I - 069 SUSPENSION I - 069 (1322 006915) 18mm x 8mm

SUSPENSION I - 070 SUSPENSION I - 070 (1322 007015) 17mm x 7mm

SUSPENSION I - 071 SUSPENSION I - 071 (1322 007115) 14mm x 6mm

SUSPENSION I - 072 SUSPENSION I - 072 (1322 007215) 21mm x 9mm

SUSPENSION I - 073 SUSPENSION I - 073 (1322 007315) 17mm x 8mm

SUSPENSION I - 074 SUSPENSION I - 074 (1322 007415) 16mm x 7mm

SUSPENSION I - 075 SUSPENSION I - 075 (1322 007515) 18mm x 8mm

SUSPENSION I - 076 SUSPENSION I - 076 (1322 007615) 17mm x 7mm

SUSPENSION I - 077 SUSPENSION I - 077 (1322 007715) 23mm x 9mm

SUSPENSION I - 082 SUSPENSION I - 082 (1322 008215) 35mm x 5mm

SUSPENSION I - 083 SUSPENSION I - 083 (1322 008315) 30mm x 5mm

SUSPENSION I - 084 SUSPENSION I - 084 (1322 008415) 35mm x 15mm

SUSPENSION I - 085 SUSPENSION I - 085 (1322 008515) 22mm x 13mm

SUSPENSION I - 086 SUSPENSION I - 086 (1322 008615) 25mm x 10mm

SUSPENSION I - 088 SUSPENSION I - 088 (1322 008815) 43mm x 6mm

SUSPENSION I - 090 SUSPENSION I - 090 (1322 009015) 26mm x 11mm

SUSPENSION I - 091 SUSPENSION I - 091 (1322 009115) 21mm x 8mm

SUSPENSION I - 092 SUSPENSION I - 092 (1322 009215) 19mm x 8mm

SUSPENSION I - 096 SUSPENSION I - 096 (1322 009615) 21mm x 9mm

SUSPENSION I - 097 SUSPENSION I - 097 (1322 009715) 19mm x 7mm

SUSPENSION I - 098 SUSPENSION I - 098 (1322 009815) 19mm x 7mm

SUSPENSION I - 099 SUSPENSION I - 099 (1322 009915) 21mm x 9mm

SUSPENSION I - 100 SUSPENSION I - 100 (1322 010015) 26mm x 11mm

SUSPENSION I - 101 SUSPENSION I - 101 (1322 010115) 34mm x 5mm

SUSPENSION I - 105 SUSPENSION I - 105 (1322 010515) 18mm x 7mm

SUSPENSION I - 305 SUSPENSION I - 305 (1322 030515) 17mm x 8mm


400 DAY BLOCKS & FORKS
(400 day suspensions, Anniversary clock suspensions, 400 day blocks and Forks)

FORKS & BLOCKS FORKS & BLOCKS (0401 001015) Assorted top & bottom blocks & forks for assembling suspension units. Pack of 12. 3 x top rectangular blocks. 3x shaped top blocks. 3 x forks. 3 x bottom blocks. All 12 are different.

400 DAY LOWER BRASS BLOCKS ASSORTMENT 400 DAY LOWER BRASS BLOCKS ASSORTMENT (0401 000615) These tend to go missing first. 6pcs. 2 of each size.


400 DAY CLOCK SUSPENSION UNITS
(400 day suspensions, Anniversary suspensions, Suspensions)

400 DAY CLOCK SUSPENSION UNIT 1 (KO-S) 400 DAY CLOCK SUSPENSION UNIT 1 (KO-S) (0679 000115) Suitable for the Kieninger & Obergfell Standard movement with an arm adjuste (70 x 92mm, KO-SA), and the Standard movement with an eccentric nut adjuster (68 x 92mm, KO-SE).

400 DAY CLOCK SUSPENSION UNIT 3A 400 DAY CLOCK SUSPENSION UNIT 3A (0679 000301)

400 DAY CLOCK SUSPENSION UNIT 3B 400 DAY CLOCK SUSPENSION UNIT 3B (0679 000302)

400 DAY CLOCK SUSPENSION UNIT 3C (KO-SN) 400 DAY CLOCK SUSPENSION UNIT 3C (KO-SN) (0679 000303) Suitable for the Kieninger & Obergfell Standard Narrow movement (44 x 93mm, KO-SN). You will have to drive out the bottom block pin and enlarge the hole when used with the Kundo 'Loose pin' pendulum, or replace the bottom block with a top block.

400 DAY CLOCK SUSPENSION UNIT 5A 400 DAY CLOCK SUSPENSION UNIT 5A (0679 000501)

400 DAY CLOCK SUSPENSION UNIT 5B 400 DAY CLOCK SUSPENSION UNIT 5B (0679 000502)

400 DAY CLOCK SUSPENSION UNIT 5E (KO-MIN) 400 DAY CLOCK SUSPENSION UNIT 5E (KO-MIN) (0679 000505) Suitable for the Kieninger & Obergfell Miniature movement (44 x 70mm with no cutout in the bottom of the backplate, KO-MIN) You will have to drive out the bottom block pin and enlarge the hole when used with a Kundo 'Loose pin' pendulum.

400 DAY CLOCK SUSPENSION UNIT 5F (KO-MID) 400 DAY CLOCK SUSPENSION UNIT 5F (KO-MID) (0679 000506) Suitable for the Kieninger & Obergfell Midget movement (44 x 70mm with a cutout in the bottom of the backplate, KO-MIDG) You will have to drive out the bottom block pin and enlarge the hole when used with a Kundo 'Loose pin' pendulum.

400 DAY CLOCK SUSPENSION UNIT 10A (JS-53) 400 DAY CLOCK SUSPENSION UNIT 10A (JS-53) (0679 001001) Suitable for the Jahresuhrenfabrik A Schatz movement marked with 53 inside a circle. (44 x 64mm, Vest shape (JS-53V) and Legged type, JS-53L)

400 DAY CLOCK SUSPENSION UNIT 10B (JS-54) 400 DAY CLOCK SUSPENSION UNIT 10B (JS-54) (0679 001002) Suitable for the Jahresuhrenfabrik A Schatz movement marked with 54 inside a circle. (43 x 60mm, Curved legs (JS-54C) and straight legs, JS-54S).

400 DAY CLOCK SUSPENSION UNIT 10C (JS-JM) 400 DAY CLOCK SUSPENSION UNIT 10C (JS-JM) (0679 001003) Suitable for the Schatz Miniature 44mm x 67mm vest shaped JUM/7 and Schatz BA Miniature Remontoire.

400 DAY CLOCK SUSPENSION UNIT 11A (KS-SE) 400 DAY CLOCK SUSPENSION UNIT 11A (KS-SE) (0679 001101) Suitable for the Kern Standard Early 69mm x 93mm (KS-SE) movement. (No locking bracket screw holes at the bottom of the back plate.) Unsuitable for the later model with locking bracket holes at the bottom of the backplate.

400 DAY CLOCK SUSPENSION UNIT 11B (KS-SL) 400 DAY CLOCK SUSPENSION UNIT 11B (KS-SL) (0679 001102) Suitable for the Kern Standard Late 69mm x 93mm KS-SL (with locking bracket screw holes) and the Kern Standard Narrow 44mm x 93mm KS-SN Unsuitable for the early Standard model with no locking bracket holes at the bottom of the backplate.

400 DAY CLOCK SUSPENSION UNIT 12C (KS-ML) 400 DAY CLOCK SUSPENSION UNIT 12C (KS-ML) (0679 001203) Suitable for the Kern Miniature, lh. winder, eccentric, 44 x 60mm KS-MLE and Kern Miniature, lh. winder, bracket, 44 x 60mm LS-MLB In most situations. A small number of clocks appear to need a KS-MLT, depending on the case and bob used.

400 DAY CLOCK SUSPENSION UNIT 12D (KS-MLB) 400 DAY CLOCK SUSPENSION UNIT 12D (KS-MLB) (0679 001204) Suitable for the Kern Miniature, Remontoire, 44 x 60mm KS-REM and in some cases the Kern Miniature, lh. winder, bracket, 44 x 60mm KS-MLB when the case is restricted.

400 DAY CLOCK SUSPENSION UNIT 12E 400 DAY CLOCK SUSPENSION UNIT 12E (0679 001205) Correct for the Kern Midget 44 x 54mm, frequently marked K.u.S. PI.

400 DAY CLOCK SUSPENSION UNIT 12F 400 DAY CLOCK SUSPENSION UNIT 12F (0679 001206) Correct for Kern Miniature 44 x 60mm with the winder on the right side of the the backplate, sometimes marked MIV.

400 DAY CLOCK SUSPENSION UNIT 13B 400 DAY CLOCK SUSPENSION UNIT 13B (0679 001302) Konrad Mauch (Koma) Standard early, 73 x 85mm Konrad Mauch (Koma) Standard late, 66 x 86mm

400 DAY CLOCK SUSPENSION UNIT 13C 400 DAY CLOCK SUSPENSION UNIT 13C (0679 001303)

400 DAY CLOCK SUSPENSION UNIT 14A 400 DAY CLOCK SUSPENSION UNIT 14A (0679 001401) KM-MINE Konrad Mauch (Koma) Miniature early, 42 x 77mm KM-MINL Konrad Mauch (Koma) Miniature late, 42 x 77mm KM-MINI Konrad Mauch (Koma) Miniature Int ratchet, 42 x 77mm Not if the weights are conical.

400 DAY CLOCK SUSPENSION UNIT 14B 400 DAY CLOCK SUSPENSION UNIT 14B (0679 001402) KM-MINE Konrad Mauch (Koma) Miniature early, 42 x 77mm Only with conical bob weights made of solid brass.

400 DAY CLOCK SUSPENSION UNIT 16 400 DAY CLOCK SUSPENSION UNIT 16 (0679 001615)

400 DAY CLOCK SUSPENSION UNIT 18C 400 DAY CLOCK SUSPENSION UNIT 18C (0679 001803) WP-STD Petersen Standard 67 x 89mm. To use a modern fork or unit, you must rotate the top block by 90 degrees

400 DAY CLOCK SUSPENSION UNIT 20A 400 DAY CLOCK SUSPENSION UNIT 20A (0679 002001)

400 DAY CLOCK SUSPENSION UNIT 20B 400 DAY CLOCK SUSPENSION UNIT 20B (0679 002002)

400 DAY CLOCK SUSPENSION UNIT 23A 400 DAY CLOCK SUSPENSION UNIT 23A (0679 002301) HR-ML10 Herr & Reiner Miniature late, 44 x 70mm ONLY when the top suspension guard screw hole is below the anchor pivot hole and under a 10inch (250mm) dome.

400 DAY CLOCK SUSPENSION UNIT 23B 400 DAY CLOCK SUSPENSION UNIT 23B (0679 002302)

400 DAY CLOCK SUSPENSION UNIT 25A 400 DAY CLOCK SUSPENSION UNIT 25A (0679 002501) FH-STD Franz Hermle Standard, 69 x 93mm

400 DAY CLOCK SUSPENSION UNIT 25B 400 DAY CLOCK SUSPENSION UNIT 25B (0679 002502) FH-MIN Franz Hermle Miniature, 43 x 65mm

400 DAY CLOCK SUSPENSION UNIT 27A 400 DAY CLOCK SUSPENSION UNIT 27A (0679 002701) HR-STD Herr & Reiner Standard, 66 x 88mm

400 DAY CLOCK SUSPENSION UNIT 27B 400 DAY CLOCK SUSPENSION UNIT 27B (0679 002702) HR-SNR Herr & Reiner Standard Narrow, 44 x 93mm

400 DAY CLOCK SUSPENSION UNIT 27C 400 DAY CLOCK SUSPENSION UNIT 27C (0679 002703)

400 DAY CLOCK SUSPENSION UNIT 28A 400 DAY CLOCK SUSPENSION UNIT 28A (0679 002801)

400 DAY CLOCK SUSPENSION UNIT 28B 400 DAY CLOCK SUSPENSION UNIT 28B (0679 002802) HR-MINE Herr & Reiner Miniature early, 44 x 70mm

400 DAY CLOCK SUSPENSION UNIT 28C 400 DAY CLOCK SUSPENSION UNIT 28C (0679 002803) HR-ML8 Herr & Reiner Miniature late, 44 x 70mm ONLY when the top suspension guard screw hole is below the anchor pivot hole and under an 8inch (200mm) dome.

400 DAY CLOCK SUSPENSION UNIT 29A 400 DAY CLOCK SUSPENSION UNIT 29A (0679 002901)

400 DAY CLOCK SUSPENSION UNIT 29B 400 DAY CLOCK SUSPENSION UNIT 29B (0679 002902) EH-MIN Edgar Henn Miniature late, 43 x 75mm

400 DAY CLOCK SUSPENSION UNIT 31 400 DAY CLOCK SUSPENSION UNIT 31 (0679 003115)

400 DAY CLOCK SUSPENSION UNIT 32 400 DAY CLOCK SUSPENSION UNIT 32 (0679 003215)

400 DAY CLOCK SUSPENSION UNIT 33 400 DAY CLOCK SUSPENSION UNIT 33 (0679 003315) SH-SNE Seigfried Haller Standard Narrow Early

400 DAY CLOCK SUSPENSION UNIT 34 400 DAY CLOCK SUSPENSION UNIT 34 (0679 003415) JK-SN Kaiser Standard narrow Globe Pendulum Correct for J. Kaiser 44 x 88mm Globe pendulum movements Unsuitable for the Petersen 67 x 89mm movement used by Kaiser.

400 DAY CLOCK SUSPENSION UNIT 35 400 DAY CLOCK SUSPENSION UNIT 35 (0679 003515) KM-MIDGE Konrad Mauch (Koma) Midget early, 42 x 54mm KM-MIDGL Konrad Mauch (Koma) Midget late, 42 x 54mm

400 DAY CLOCK SUSPENSION UNIT 36B 400 DAY CLOCK SUSPENSION UNIT 36B (0679 003602)

400 DAY CLOCK SUSPENSION UNIT 38A 400 DAY CLOCK SUSPENSION UNIT 38A (0679 003801)

400 DAY CLOCK SUSPENSION UNIT 41B 400 DAY CLOCK SUSPENSION UNIT 41B (0679 004102)

400 DAY CLOCK SUSPENSION UNIT 42A 400 DAY CLOCK SUSPENSION UNIT 42A (0679 004201) SH-SNL Seigfried Haller Standard Narrow Late

400 DAY CLOCK SUSPENSION UNIT 43A 400 DAY CLOCK SUSPENSION UNIT 43A (0679 004301) SH-MINL Siegfried Haller Miniature Late 44 x 60mm Suitable for the Haller Miniature movement that has a pivot adjuster in an arm on the front plate. Not suitable for the Midget of the same size.

400 DAY CLOCK SUSPENSION UNIT 44A 400 DAY CLOCK SUSPENSION UNIT 44A (0679 004401) SH-MIDGE Siegfried Haller Midget Early 44 x 60mm SH-MIDGL Siegfried Haller Midget Late 44 x 60mm

400 DAY CLOCK SUSPENSION UNIT 45A 400 DAY CLOCK SUSPENSION UNIT 45A (0679 004501) NC-SNR Nisshin Master Standard Narrow, Round corners 44 x 60mm

400 DAY CLOCK SUSPENSION UNIT 47 400 DAY CLOCK SUSPENSION UNIT 47 (0679 004715)

400 DAY CLOCK SUSPENSION UNIT 48B 400 DAY CLOCK SUSPENSION UNIT 48B (0679 004802)

400 DAY CLOCK SUSPENSION UNIT 49B 400 DAY CLOCK SUSPENSION UNIT 49B (0679 004902)

400 DAY CLOCK SUSPENSION UNIT 50B 400 DAY CLOCK SUSPENSION UNIT 50B (0679 005002)

400 DAY CLOCK SUSPENSION UNIT 51B 400 DAY CLOCK SUSPENSION UNIT 51B (0679 005102)

400 DAY CLOCK SUSPENSION UNIT 52B 400 DAY CLOCK SUSPENSION UNIT 52B (0679 005202)

400 DAY CLOCK SUSPENSION UNIT 53B 400 DAY CLOCK SUSPENSION UNIT 53B (0679 005302)

400 DAY CLOCK SUSPENSION UNIT 54B 400 DAY CLOCK SUSPENSION UNIT 54B (0679 005402)

400 DAY CLOCK SUSPENSION UNIT 55 400 DAY CLOCK SUSPENSION UNIT 55 (0679 005515)

400 DAY CLOCK SUSPENSION UNIT 56 400 DAY CLOCK SUSPENSION UNIT 56 (0679 005615)

400 DAY CLOCK SUSPENSION UNIT 57 400 DAY CLOCK SUSPENSION UNIT 57 (0679 005715)

400 DAY CLOCK SUSPENSION UNIT 58 400 DAY CLOCK SUSPENSION UNIT 58 (0679 005815)

400 DAY CLOCK SUSPENSION UNIT 59 400 DAY CLOCK SUSPENSION UNIT 59 (0679 005915)

400 DAY CLOCK SUSPENSION UNIT 60B 400 DAY CLOCK SUSPENSION UNIT 60B (0679 006002)

400 DAY CLOCK SUSPENSION UNIT 61B 400 DAY CLOCK SUSPENSION UNIT 61B (0679 006102)

400 DAY CLOCK SUSPENSION UNIT 63B 400 DAY CLOCK SUSPENSION UNIT 63B (0679 006302)

400 DAY CLOCK SUSPENSION UNIT 67B 400 DAY CLOCK SUSPENSION UNIT 67B (0679 006702)

400 DAY CLOCK SUSPENSION UNIT 68B 400 DAY CLOCK SUSPENSION UNIT 68B (0679 006802)

400 DAY CLOCK SUSPENSION UNIT 6789 400 DAY CLOCK SUSPENSION UNIT 6789 (0679 678915)


CUCKOO LEADERS
Length is overall length. (Cuckoo leaders)

CUCKOO LEADER 80mm CUCKOO LEADER 80mm (0954 008015)

CUCKOO LEADER 90mm CUCKOO LEADER 90mm (0954 009015)

CUCKOO LEADER 100mm CUCKOO LEADER 100mm (0954 010015)

CUCKOO LEADER 110mm CUCKOO LEADER 110mm (0954 011015)


ATMOS CLOCK PARTS
(Atmos parts)

SUSPENSION UNIT FOR ATMOS CLOCK SUSPENSION UNIT FOR ATMOS CLOCK (1076 000115)


BACK COCKS
Well constructed longcase back cocks. Brass. Suspension slot cut, with curved suspension seat. Not castings, but made from solid brass. (Back cocks, Longcase back cocks)

LONGCASE BACK COCK, TWIN ARM. LONGCASE BACK COCK, TWIN ARM. (1458 000215) For later clocks. Arm 44mm. Pivot hole 15mm from plate face. Blank so that holes can be created to suit.


We have more products, please view the list of Categories
You may be interested in these associated pages:
Suspensions for 400 day clocks | Pendulums, Grandfather clocks | Pendulums for French clocks | Clock pins |

You can see these specific products listed in our Online Store at www.medmaw.com.




Click a link to find out more information about any product.
Home
Home
Store
Store
Catalogue
Catalogue
Index
Index


         

©2005 M&P, All rights reserved.

Valid HTML 4.01 Transitional