The clock Part Store's Parts Index
Chapter Ten: Clockmakers' Supplies
F0420 HSS METRIC TWIST DRILLS A quality high speed jobber twist drill. Sold singly. Discounts available for quantities.
0420 002015 HSS METRIC TWIST DRILL 0.20mm
0420 003015 HSS METRIC TWIST DRILL 0.30mm
0420 003215 HSS METRIC TWIST DRILL 0.32mm
0420 003515 HSS METRIC TWIST DRILL 0.35mm
0420 003815 HSS METRIC TWIST DRILL 0.38mm
0420 004015 HSS METRIC TWIST DRILL 0.40mm
0420 004215 HSS METRIC TWIST DRILL 0.42mm
0420 004515 HSS METRIC TWIST DRILL 0.45mm
0420 004815 HSS METRIC TWIST DRILL 0.48mm
0420 005015 HSS METRIC TWIST DRILL 0.50mm
0420 005215 HSS METRIC TWIST DRILL 0.52mm
0420 005515 HSS METRIC TWIST DRILL 0.55mm
0420 005815 HSS METRIC TWIST DRILL 0.58mm
0420 006015 HSS METRIC TWIST DRILL 0.60mm
0420 006215 HSS METRIC TWIST DRILL 0.62mm
0420 006515 HSS METRIC TWIST DRILL 0.65mm
0420 006815 HSS METRIC TWIST DRILL 0.68mm
0420 007015 HSS METRIC TWIST DRILL 0.70mm
0420 007215 HSS METRIC TWIST DRILL 0.72mm
0420 007515 HSS METRIC TWIST DRILL 0.75mm
0420 007815 HSS METRIC TWIST DRILL 0.78mm
0420 008015 HSS METRIC TWIST DRILL 0.80mm
0420 008215 HSS METRIC TWIST DRILL 0.82mm
0420 008515 HSS METRIC TWIST DRILL 0.85mm
0420 008815 HSS METRIC TWIST DRILL 0.88mm
0420 009015 HSS METRIC TWIST DRILL 0.90mm
0420 009215 HSS METRIC TWIST DRILL 0.92mm
0420 009515 HSS METRIC TWIST DRILL 0.95mm
0420 009815 HSS METRIC TWIST DRILL 0.98mm
0420 010015 HSS METRIC TWIST DRILL 1.00mm
0420 010515 HSS METRIC TWIST DRILL 1.05mm
0420 011015 HSS METRIC TWIST DRILL 1.10mm
0420 011515 HSS METRIC TWIST DRILL 1.15mm
0420 012015 HSS METRIC TWIST DRILL 1.20mm
0420 012515 HSS METRIC TWIST DRILL 1.25mm
0420 013015 HSS METRIC TWIST DRILL 1.30mm
0420 013515 HSS METRIC TWIST DRILL 1.35mm
0420 014015 HSS METRIC TWIST DRILL 1.40mm
0420 014515 HSS METRIC TWIST DRILL 1.45mm
0420 015015 HSS METRIC TWIST DRILL 1.50mm
0420 015515 HSS METRIC TWIST DRILL 1.55mm
0420 016015 HSS METRIC TWIST DRILL 1.60mm
0420 016515 HSS METRIC TWIST DRILL 1.65mm
0420 017015 HSS METRIC TWIST DRILL 1.70mm
0420 017515 HSS METRIC TWIST DRILL 1.75mm
0420 018015 HSS METRIC TWIST DRILL 1.80mm
0420 018515 HSS METRIC TWIST DRILL 1.85mm
0420 019015 HSS METRIC TWIST DRILL 1.90mm
0420 019515 HSS METRIC TWIST DRILL 1.95mm
0420 020015 HSS METRIC TWIST DRILL 2.00mm
0420 020515 HSS METRIC TWIST DRILL 2.05mm
0420 021015 HSS METRIC TWIST DRILL 2.10mm
0420 021515 HSS METRIC TWIST DRILL 2.15mm
0420 022015 HSS METRIC TWIST DRILL 2.20mm
0420 022515 HSS METRIC TWIST DRILL 2.25mm
0420 023015 HSS METRIC TWIST DRILL 2.30mm
0420 023515 HSS METRIC TWIST DRILL 2.35mm
0420 024015 HSS METRIC TWIST DRILL 2.40mm
0420 024515 HSS METRIC TWIST DRILL 2.45mm
0420 025015 HSS METRIC TWIST DRILL 2.50mm
0420 025515 HSS METRIC TWIST DRILL 2.55mm
0420 026015 HSS METRIC TWIST DRILL 2.60mm
0420 026515 HSS METRIC TWIST DRILL 2.65mm
0420 027015 HSS METRIC TWIST DRILL 2.70mm
0420 027515 HSS METRIC TWIST DRILL 2.75mm
0420 028015 HSS METRIC TWIST DRILL 2.80mm
0420 028515 HSS METRIC TWIST DRILL 2.85mm
0420 029015 HSS METRIC TWIST DRILL 2.90mm
0420 029515 HSS METRIC TWIST DRILL 2.95mm
0420 030015 HSS METRIC TWIST DRILL 3.00mm
0420 031015 HSS METRIC TWIST DRILL 3.10mm
0420 031515 HSS METRIC TWIST DRILL 3.15mm
0420 032015 HSS METRIC TWIST DRILL 3.20mm
0420 032515 HSS METRIC TWIST DRILL 3.25mm
0420 033015 HSS METRIC TWIST DRILL 3.30mm
0420 034015 HSS METRIC TWIST DRILL 3.40mm
0420 035015 HSS METRIC TWIST DRILL 3.50mm
0420 035515 HSS METRIC TWIST DRILL 3.55mm
0420 036015 HSS METRIC TWIST DRILL 3.60mm
0420 037015 HSS METRIC TWIST DRILL 3.70mm
0420 037515 HSS METRIC TWIST DRILL 3.75mm
0420 038015 HSS METRIC TWIST DRILL 3.80mm
0420 039015 HSS METRIC TWIST DRILL 3.90mm
0420 040015 HSS METRIC TWIST DRILL 4.00mm
0420 041015 HSS METRIC TWIST DRILL 4.10mm
0420 042015 HSS METRIC TWIST DRILL 4.20mm
0420 042515 HSS METRIC TWIST DRILL 4.25mm
0420 043015 HSS METRIC TWIST DRILL 4.30mm
0420 044015 HSS METRIC TWIST DRILL 4.40mm
0420 045015 HSS METRIC TWIST DRILL 4.50mm
0420 046015 HSS METRIC TWIST DRILL 4.60mm
0420 047015 HSS METRIC TWIST DRILL 4.70mm
0420 047515 HSS METRIC TWIST DRILL 4.75mm
0420 048015 HSS METRIC TWIST DRILL 4.80mm
0420 049015 HSS METRIC TWIST DRILL 4.90mm
0420 050015 HSS METRIC TWIST DRILL 5.00mm
0420 051015 HSS METRIC TWIST DRILL 5.10mm
0420 052015 HSS METRIC TWIST DRILL 5.20mm
0420 052515 HSS METRIC TWIST DRILL 5.25mm
0420 053015 HSS METRIC TWIST DRILL 5.30mm
0420 054015 HSS METRIC TWIST DRILL 5.40mm
0420 055015 HSS METRIC TWIST DRILL 5.50mm
0420 056015 HSS METRIC TWIST DRILL 5.60mm
0420 057015 HSS METRIC TWIST DRILL 5.70mm
0420 057515 HSS METRIC TWIST DRILL 5.75mm
0420 058015 HSS METRIC TWIST DRILL 5.80mm
0420 059015 HSS METRIC TWIST DRILL 5.90mm
0420 060015 HSS METRIC TWIST DRILL 6.00mm
0420 061015 HSS METRIC TWIST DRILL 6.10mm
0420 062015 HSS METRIC TWIST DRILL 6.20mm
0420 062515 HSS METRIC TWIST DRILL 6.25mm
0420 063015 HSS METRIC TWIST DRILL 6.30mm
0420 064015 HSS METRIC TWIST DRILL 6.40mm
0420 065015 HSS METRIC TWIST DRILL 6.50mm
0420 066015 HSS METRIC TWIST DRILL 6.60mm
0420 067015 HSS METRIC TWIST DRILL 6.70mm
0420 067515 HSS METRIC TWIST DRILL 6.75mm
0420 068015 HSS METRIC TWIST DRILL 6.80mm
0420 069015 HSS METRIC TWIST DRILL 6.90mm
0420 070015 HSS METRIC TWIST DRILL 7.00mm
0420 071015 HSS METRIC TWIST DRILL 7.10mm
0420 072015 HSS METRIC TWIST DRILL 7.20mm
0420 072515 HSS METRIC TWIST DRILL 7.25mm
0420 073015 HSS METRIC TWIST DRILL 7.30mm
0420 074015 HSS METRIC TWIST DRILL 7.40mm
0420 075015 HSS METRIC TWIST DRILL 7.50mm
0420 076015 HSS METRIC TWIST DRILL 7.60mm
0420 077015 HSS METRIC TWIST DRILL 7.70mm
0420 077515 HSS METRIC TWIST DRILL 7.75mm
0420 078015 HSS METRIC TWIST DRILL 7.80mm
0420 079015 HSS METRIC TWIST DRILL 7.90mm
0420 080015 HSS METRIC TWIST DRILL 8.00mm
0420 081015 HSS METRIC TWIST DRILL 8.10mm
0420 082015 HSS METRIC TWIST DRILL 8.20mm
0420 082515 HSS METRIC TWIST DRILL 8.25mm
0420 083015 HSS METRIC TWIST DRILL 8.30mm
0420 084015 HSS METRIC TWIST DRILL 8.40mm
0420 085015 HSS METRIC TWIST DRILL 8.50mm
0420 086015 HSS METRIC TWIST DRILL 8.60mm
0420 087015 HSS METRIC TWIST DRILL 8.70mm
0420 087515 HSS METRIC TWIST DRILL 8.75mm
0420 088015 HSS METRIC TWIST DRILL 8.80mm
0420 089015 HSS METRIC TWIST DRILL 8.90mm
0420 090015 HSS METRIC TWIST DRILL 9.00mm
0420 091015 HSS METRIC TWIST DRILL 9.10mm
0420 092015 HSS METRIC TWIST DRILL 9.20mm
0420 092515 HSS METRIC TWIST DRILL 9.25mm
0420 093015 HSS METRIC TWIST DRILL 9.30mm
0420 094015 HSS METRIC TWIST DRILL 9.40mm
0420 095015 HSS METRIC TWIST DRILL 9.50mm
0420 096015 HSS METRIC TWIST DRILL 9.60mm
0420 097015 HSS METRIC TWIST DRILL 9.70mm
0420 097515 HSS METRIC TWIST DRILL 9.75mm
0420 098015 HSS METRIC TWIST DRILL 9.80mm
0420 099015 HSS METRIC TWIST DRILL 9.90mm
0420 100015 HSS METRIC TWIST DRILL 10.00mm
0420 101015 HSS METRIC TWIST DRILL 10.10mm
0420 102015 HSS METRIC TWIST DRILL 10.20mm
0420 102515 HSS METRIC TWIST DRILL 10.25mm
0420 103015 HSS METRIC TWIST DRILL 10.30mm
0420 104015 HSS METRIC TWIST DRILL 10.40mm
0420 105015 HSS METRIC TWIST DRILL 10.50mm
0420 106015 HSS METRIC TWIST DRILL 10.60mm
0420 107015 HSS METRIC TWIST DRILL 10.70mm
0420 107515 HSS METRIC TWIST DRILL 10.75mm
0420 108015 HSS METRIC TWIST DRILL 10.80mm
0420 109015 HSS METRIC TWIST DRILL 10.90mm
0420 110015 HSS METRIC TWIST DRILL 11.00mm
0420 111015 HSS METRIC TWIST DRILL 11.10mm
0420 112015 HSS METRIC TWIST DRILL 11.20mm
0420 112515 HSS METRIC TWIST DRILL 11.25mm
0420 113015 HSS METRIC TWIST DRILL 11.30mm
0420 114015 HSS METRIC TWIST DRILL 11.40mm
0420 115015 HSS METRIC TWIST DRILL 11.50mm
0420 116015 HSS METRIC TWIST DRILL 11.60mm
0420 117015 HSS METRIC TWIST DRILL 11.70mm
0420 117515 HSS METRIC TWIST DRILL 11.75mm
0420 118015 HSS METRIC TWIST DRILL 11.80mm
0420 119015 HSS METRIC TWIST DRILL 11.90mm
0420 120015 HSS METRIC TWIST DRILL 12.00mm
0420 121015 HSS METRIC TWIST DRILL 12.10mm
0420 122015 HSS METRIC TWIST DRILL 12.20mm
0420 122515 HSS METRIC TWIST DRILL 12.25mm
0420 123015 HSS METRIC TWIST DRILL 12.30mm
0420 124015 HSS METRIC TWIST DRILL 12.40mm
0420 125015 HSS METRIC TWIST DRILL 12.50mm
0420 126015 HSS METRIC TWIST DRILL 12.60mm
0420 127015 HSS METRIC TWIST DRILL 12.70mm
0420 127515 HSS METRIC TWIST DRILL 12.75mm
0420 128015 HSS METRIC TWIST DRILL 12.80mm
0420 129015 HSS METRIC TWIST DRILL 12.90mm
0420 130015 HSS METRIC TWIST DRILL 13.00mm
0420 131015 HSS METRIC TWIST DRILL 13.10mm
0420 132015 HSS METRIC TWIST DRILL 13.20mm
0420 132515 HSS METRIC TWIST DRILL 13.25mm
0420 133015 HSS METRIC TWIST DRILL 13.30mm
0420 134015 HSS METRIC TWIST DRILL 13.40mm
0420 135015 HSS METRIC TWIST DRILL 13.50mm
0420 136015 HSS METRIC TWIST DRILL 13.60mm
0420 137015 HSS METRIC TWIST DRILL 13.70mm
0420 137515 HSS METRIC TWIST DRILL 13.75mm
0420 138015 HSS METRIC TWIST DRILL 13.80mm
0420 139015 HSS METRIC TWIST DRILL 13.90mm
0420 140015 HSS METRIC TWIST DRILL 14.00mm
0420 142515 HSS METRIC TWIST DRILL 14.25mm Other large sizes available, please enquire.
0420 145015 HSS METRIC TWIST DRILL 14.50mm
0420 147515 HSS METRIC TWIST DRILL 14.75mm
0420 150015 HSS METRIC TWIST DRILL 15.00mm
0420 152515 HSS METRIC TWIST DRILL 15.25mm
0420 155015 HSS METRIC TWIST DRILL 15.50mm
0420 157515 HSS METRIC TWIST DRILL 15.75mm
0420 160015 HSS METRIC TWIST DRILL 16.00mm
0420 165015 HSS METRIC TWIST DRILL 16.50mm
0420 170015 HSS METRIC TWIST DRILL 17.00mm
0420 175015 HSS METRIC TWIST DRILL 17.50mm
0420 180015 HSS METRIC TWIST DRILL 18.00mm
0420 185015 HSS METRIC TWIST DRILL 18.50mm
0420 190015 HSS METRIC TWIST DRILL 19.00mm
0420 195015 HSS METRIC TWIST DRILL 19.50mm
0420 200015 HSS METRIC TWIST DRILL 20.00mm
F0989F METRIC 1st. TAPS Very high quality carbon steel, similar to HSS steel. 1st or taper tap.
0989 101015 METRIC TAP 1ST 1.0mm
0989 101215 METRIC TAP 1ST 1.2mm
0989 101415 METRIC TAP 1ST 1.4mm
0989 101615 METRIC TAP 1ST 1.6mm
0989 101815 METRIC TAP 1ST 1.8mm
0989 102015 METRIC TAP 1ST 2.0mm Pitch: 0.40mm
0989 102515 METRIC TAP 1ST 2.5mm Pitch: 0.45mm
0989 103015 METRIC TAP 1ST 3.0mm Pitch: 0.50mm
0989 104015 METRIC TAP 1ST 4.0mm Pitch: 0.70mm (Taper)
0989 106015 METRIC TAP 1ST 6.0mm Pitch: 1.00mm (Taper)
F0989S METRIC 2nd. TAPS Very high quality carbon steel, similar to HSS steel. 2nd Taps.
0989 201015 METRIC TAP 2ND 1.0mm
0989 201215 METRIC TAP 2ND 1.2mm
0989 201415 METRIC TAP 2ND 1.4mm
0989 201615 METRIC TAP 2ND 1.6mm
0989 201815 METRIC TAP 2ND 1.8mm
0989 202015 METRIC TAP 2ND 2.0mm Pitch: 0.40mm
0989 202515 METRIC TAP 2ND 2.5mm Pitch: 0.45mm
0989 203015 METRIC TAP 2ND 3.0mm Pitch: 0.50mm
F0989B METRIC 3rd. TAPS Very high quality carbon steel, similar to HSS steel. 3rd or bottoming taps.
0989 301015 METRIC TAP 3RD 1.0mm
0989 301215 METRIC TAP 3RD 1.2mm
0989 301415 METRIC TAP 3RD 1.4mm
0989 301615 METRIC TAP 3RD 1.6mm
0989 301815 METRIC TAP 3RD 1.8mm
0989 302015 METRIC TAP 3RD 2.0mm Pitch: 0.40mm
0989 302515 METRIC TAP 3RD 2.5mm Pitch: 0.45mm
0989 303015 METRIC TAP 3RD 3.0mm Pitch: 0.40mm
0989 304015 METRIC TAP 3RD 4.0mm Pitch: 0.70mm (Bottoming)
0989 306015 METRIC TAP 3RD 6.0mm Pitch: 1.00mm (Bottoming)
F0989G TAPS FOR GONG INDUSTRY
0989 650115 TAP FOR GONG INDUSTRY 6.5mm x 1 Standard gong rods are fitted to their cast iron stands using an unusual metric thread, specific to the gong industry. It is a tight fit, enabling the rod to be tuned more easily. Use 5.4mm tapping drill.
F0533F BA 1st. TAPS Very high quality carbon steel, similar to HSS steel. 1st or taper taps.
0533 100415 BA TAP 1ST OR TAPER 4BA
0533 100515 BA TAP 1ST OR TAPER 5BA
0533 100615 BA TAP 1ST OR TAPER 6BA
0533 100715 BA TAP 1ST OR TAPER 7BA
0533 100815 BA TAP 1ST OR TAPER 8BA
0533 100915 BA TAP 1ST OR TAPER 9BA
0533 101015 BA TAP 1ST OR TAPER 10BA
0533 101215 BA TAP 1ST OR TAPER 12BA
0533 100215 BA TAP 1ST OR TAPER 2BA
0533 100315 BA TAP 1ST OR TAPER 3BA
F0533S BA 2nd. TAPS Very high quality carbon steel, similar to HSS steel. 2nd taps.
0533 200215 BA TAP 2ND 2BA
0533 200315 BA TAP 2ND 3BA
0533 200415 BA TAP 2ND 4BA
0533 200515 BA TAP 2ND 5BA
0533 200615 BA TAP 2ND 6BA
0533 200715 BA TAP 2ND 7BA
0533 200815 BA TAP 2ND 8BA
0533 200915 BA TAP 2ND 9BA
0533 201015 BA TAP 2ND 10BA
0533 201215 BA TAP 2ND 12BA
F0533B BA 3rd. TAPS Very high quality carbon steel, similar to HSS steel. 3rd or bottoming taps.
0533 300215 BA TAP 3RD OR BOTTOM 2BA
0533 300315 BA TAP 3RD OR BOTTOM 3BA
0533 300415 BA TAP 3RD OR BOTTOM 4BA
0533 300515 BA TAP 3RD OR BOTTOM 5BA
0533 300615 BA TAP 3RD OR BOTTOM 6BA
0533 300715 BA TAP 3RD OR BOTTOM 7BA
0533 300815 BA TAP 3RD OR BOTTOM 8BA
0533 300915 BA TAP 3RD OR BOTTOM 9BA
0533 301015 BA TAP 3RD OR BOTTOM 10BA
0533 301215 BA TAP 3RD OR BOTTOM 12BA
F1444 TAP CARBON STEEL 1/8inch BSW
1444 101815 TAP CARBON STEEL 1/8inch BSW 1st
1444 201815 TAP CARBON STEEL 1/8inch BSW 2nd
1444 301815 TAP CARBON STEEL 1/8inch BSW 3rd
F0550W WHITWORTH DIES
0550 001815 13/16inch 1/8inch WHITWORTH DIE Carbon steel. Used for making longcase pendulum rods fit double ended suspensions and flats.
F0550 13/16inch BA DIES Carbon steel. Depending on the manufacturer, these may be 13/16inch (20.6mm) or 20mm. Both sizes should a 13/16inch die holder.
0550 000215 13/16inch BA DIE 2BA
0550 000315 13/16inch BA DIE 3BA
0550 000415 13/16inch BA DIE 4BA
0550 000515 13/16inch BA DIE 5BA
0550 000615 13/16inch BA DIE 6BA
0550 000715 13/16inch BA DIE 7BA
0550 000815 13/16inch BA DIE 8BA
0550 000915 13/16inch BA DIE 9BA
0550 001015 13/16inch BA DIE 10BA
0550 001215 13/16inch BA DIE 12BA
F1447 DIE, M3.5 x 0.6
1447 035015 DIE, M3.5 x 0.6 13/16inch diameter.
F0720 CASED SET OF BA TAPS & DIES Set contains 1st & 3rd and die for each size plus tap wrench and die holder suit.
0720 000115 CASED SET OF BA TAPS & DIES BA set. No.s 2, 4, 5, 6, 7, 8, 10 & 12.
0720 000215 CASED SET OF METRIC TAPS & DIES Metric set. No.s 2, 2.5, 3, 3.5, 4, 5 & 6mm.
F0551 13/16inch DIE HOLDER
0551 000115 13/16inch DIE HOLDER Steel construction.
F0552 TAP WRENCHES Also useful for holding cutting broaches to ensure that they are perpendicular to the plate.
0552 001215 TAP WRENCH 1/2inch (1/16inch-1/2inch)
0552 001415 TAP WRENCH 1/4inch
F1600 METRIC SLOT HEAD, ZINC SCREWS. Packs of 25, 12mm in length.
1600 002015 12mm - M2, ZINC SLOT-HEAD
1600 002515 12mm - M2.5, ZINC SLOT-HEAD
1600 003015 12mm - M3, ZINC SLOT-HEAD
1600 004015 12mm - M4, ZINC SLOT-HEAD
1600 005015 12mm - M5, ZINC SLOT-HEAD
F1600B METRIC SLOT HEAD, BRASS SCREWS. Packs of 25, 12mm in length.
1600 002018 12mm - M2, BRASS SLOT-HEAD
1600 002518 12mm - M2.5, BRASS SLOT-HEAD
1600 003018 12mm - M3, BRASS SLOT-HEAD
1600 004018 12mm - M4, BRASS SLOT-HEAD
1600 005018 12mm - M5, BRASS SLOT-HEAD
F1600S METRIC SLOT HEAD, BLUED STEEL SCREWS. Packs of 25.
1600 001015 1mm - M1, COUNTERSUNK. Suitable for use with 400 day blocks. Screw head: 2mm.
F0553 STEEL BA SCREWS In packs of 25.
0553 021214 STEEL SCREWS 1/2inch 2BA Cheese head.
0553 041214 STEEL SCREWS 1/2inch 4BA Cheese head.
0553 051214 STEEL SCREWS 1/2inch 5BA Cheese head.
0553 071214 STEEL SCREWS 1/2inch 7BA Cheese head.
0553 061214 STEEL SCREWS 1/2inch 6BA Cheese head.
0553 081214 STEEL SCREWS 1/2inch 8BA Cheese head.
0553 101214 STEEL SCREWS 1/2inch 10BA Cheese head.
0553 121214 STEEL SCREWS 1/2inch 12BA Cheese head.
0554 931614 STEEL SCREWS 3/16inch 9BA CSK 3/16inch countersunk, in 25's
0553 042014 STEEL SCREWS 2inch 4BA Cheese head.
0554 131614 STEEL SCREWS 3/16inch 10BA Counter sunk.
F0555 STEEL BA NUTS Hex nuts. In packs of 25.
0555 020014 STEEL NUTS 2BA
0555 040014 STEEL NUTS 4BA
0555 050014 STEEL NUTS 5BA
0555 060014 STEEL NUTS 6BA
0555 070014 STEEL NUTS 7BA
0555 080014 STEEL NUTS 8BA
0555 100014 STEEL NUTS 10BA
0555 120014 STEEL NUTS 12BA
F0538C COUNTERSUNK WOOD SCREWS - BRASS Packs of 25.
0538 401418 BRASS SCREW FOR WOOD. COUNTERSUNK. 25pcs 1/4inch x No.0, 6mm long, head o/d 2.8mm - Countersunk. (suitable for use with barometer bezels etc)
0538 201418 BRASS SCREW FOR WOOD.COUNTERSUNK. 25pcs 1/4inch x No.1, 6mm long, head o/d 3.4mm - Countersunk (suitable for use with barometer bezels etc) Max shaft diameter: 1.7mm approx.
0538 203803 BRASS SCREW FOR WOOD. COUNTERSUNK. 25pcs 3/8inch x No.2, 9mm long, head o/d 4mm - Countersunk. Max shaft diameter: 2.1mm approx.
0538 201203 BRASS SCREW FOR WOOD.COUNTERSUNK. 25pcs 1/2inch x No.2, 12mm long, head o/d 4mm - Countersunk.
0538 203403 BRASS SCREW FOR WOOD. COUNTERSUNK. 25pcs 3/4inch x No.2, 18mm long, head o/d 4mm - Countersunk.
0538 303803 BRASS SCREW FOR WOOD. COUNTERSUNK. 25pcs 3/8inch x No.3, 9mm long, head o/d 4.5mm - Countersunk. Max shaft diameter: 2.3mm approx.
0538 403803 BRASS SCREW FOR WOOD. COUNTERSUNK. 25pcs 3/8inch x No.4, 9mm long, head o/d 5mm - Countersunk.
0538 401203 BRASS SCREW FOR WOOD. COUNTERSUNK. 25pcs 1/2inch x No.4, 12mm long, head o/d 5.3mm - Countersunk. Max shaft diameter: 2.7mm approx.
0538 405803 BRASS SCREW FOR WOOD. COUNTERSUNK. 25pcs 5/8inch x No.4, 15mm long, head o/d 5mm - Countersunk.
0538 403403 BRASS SCREW FOR WOOD. COUNTERSUNK. 25pcs 3/4inch x No.4, 18mm long, head o/d 5mm - Countersunk.
0538 401003 BRASS SCREW FOR WOOD. COUNTERSUNK. 25pcs 1inch x No.4, 25mm long, head o/d 5.3mm - Countersunk. Max shaft diameter: 2.7mm approx.
0538 401004 SCREWS FOR WOOD. COUNTERSUNK. (STAINLESS STEEL) 25pcs 1inch x No.4, 25mm long, head o/d 5mm - Countersunk.
F0538R ROUNDHEAD WOOD SCREWS - BRASS Packs of 25.
0538 000318 BRASS SCREW FOR WOOD. 25pcs. 1/8inch long. 3mm - Round head.
0538 301418 BRASS SCREW FOR WOOD. ROUND HEAD. 25pcs 1/4inch x No.0, 6mm long, head o/d 2.5mm - Round head. (suitable for use with barometer bezels etc) Max shaft diameter: 1.5mm approx.
0538 101418 BRASS SCREW FOR WOOD. ROUND HEAD. 25pcs 1/4inch x No.1, 7mm long, head o/d 3.5mm - Round head. (suitable for use with barometer bezels etc)
0538 203818 BRASS SCREW FOR WOOD. ROUND HEAD. 25pcs 3/8inch x No.2, 9mm long, head o/d 4mm - Round head. (suitable for use with barometer bezels etc)
0538 303818 BRASS SCREW FOR WOOD. ROUND HEAD. 25pcs 3/4inch x No.3 - Round head, o/d 4.5mm 9mm long.
0538 403818 BRASS SCREW FOR WOOD. ROUND HEAD. 25pcs 3/8inch x No.4 9mm long, head o/d 5mm - Round head.
0538 401218 BRASS SCREW FOR WOOD. ROUND HEAD. 25pcs 1/2inch x No.4, 14mm long, head o/d 5mm - Round head.
0538 403418 BRASS SCREW FOR WOOD. ROUND HEAD. 25pcs 3/4inch x No.4, 19mm long, head o/d 5.3mm - Round head.
F0929 KNURLED BRASS NUTS Solid brass nuts for making Vienna Stabilizers, fasteners, rating nuts etc. Sold in 5's. Threaded.
0929 090518 KNURLED BRASS NUTS SMALL 9.5mm wide. 5.5mm high. 4BA
0929 129018 KNURLED BRASS NUTS LARGE 12mm wide. 9mm high. 2BA
0929 129005 KNURLED CHROME NUTS LARGE 12mm wide. 9mm high. 2BA
F0333N STANDARD NICKELLED CLOCK KEYS Dimension given is across the flats of the square. *Nickelled range except 7mm which is steel - 0333 070015*
0333 020014 STANDARD CLOCK KEY NICKELLED 2.00mm
0333 022514 STANDARD CLOCK KEY NICKELLED 2.25mm
0333 025014 STANDARD CLOCK KEY NICKELLED 2.50mm
0333 027514 STANDARD CLOCK KEY NICKELLED 2.75mm
0333 030014 STANDARD CLOCK KEY NICKELLED 3.00mm
0333 032514 STANDARD CLOCK KEY NICKELLED 3.25mm
0333 035014 STANDARD CLOCK KEY NICKELLED 3.50mm
0333 037514 STANDARD CLOCK KEY NICKELLED 3.75mm
0333 040014 STANDARD CLOCK KEY NICKELLED 4.00mm
0333 042514 STANDARD CLOCK KEY NICKELLED 4.25mm
0333 045014 STANDARD CLOCK KEY NICKELLED 4.50mm
0333 047514 STANDARD CLOCK KEY NICKELLED 4.75mm
0333 050014 STANDARD CLOCK KEY NICKELLED 5.00mm
0333 052514 STANDARD CLOCK KEY NICKELLED 5.25mm
0333 055014 STANDARD CLOCK KEY NICKELLED 5.50mm
0333 057514 STANDARD CLOCK KEY NICKELLED 5.75mm
0333 060014 STANDARD CLOCK KEY NICKELLED 6.00mm
0333 070014 STANDARD CLOCK KEY STEEL 7.00mm
F0333R BUTTERFLY BRASS CLOCK WINDING KEYS Dimension given is across the flats of the square. Always use the metric size of a key because more than one key size numbering system exists. A key which fits and has a number on it can be one of two sizes.
0333 020018 STANDARD CLOCK KEY BRASS 2.00mm
0333 022518 STANDARD CLOCK KEY BRASS 2.25mm
0333 025018 STANDARD CLOCK KEY BRASS 2.50mm
0333 027518 STANDARD CLOCK KEY BRASS 2.75mm
0333 030018 STANDARD CLOCK KEY BRASS 3.00mm
0333 032518 STANDARD CLOCK KEY BRASS 3.25mm
0333 035018 STANDARD CLOCK KEY BRASS 3.50mm
0333 037518 STANDARD CLOCK KEY BRASS 3.75mm
0333 040018 STANDARD CLOCK KEY BRASS 4.00mm
0333 042518 STANDARD CLOCK KEY BRASS 4.25mm
0333 045018 STANDARD CLOCK KEY BRASS 4.50mm
0333 047518 STANDARD CLOCK KEY BRASS 4.75mm
0333 050018 STANDARD CLOCK KEY BRASS 5.00mm
0333 052518 STANDARD CLOCK KEY BRASS 5.25mm
0333 055018 STANDARD CLOCK KEY BRASS 5.50mm
0333 057518 STANDARD CLOCK KEY BRASS 5.75mm
0333 060018 STANDARD CLOCK KEY BRASS 6.00mm
F1641 LONG SHAFTED BRASS CLOCK KEYS Sizes 1.75mm upto 6mm Shaft lengths 58mm approx. Always use a steel key on very strong springs.
1641 017518 1.75MM LONG SHAFT CLOCK KEY BRASS
1641 020018 2.00MM LONG SHAFT CLOCK KEY BRASS
1641 022518 2.25MM LONG SHAFT CLOCK KEY BRASS
1641 025018 2.50MM LONG SHAFT CLOCK KEY BRASS
1641 027518 2.75MM LONG SHAFT CLOCK KEY BRASS
1641 030018 3.00MM LONG SHAFT CLOCK KEY BRASS
1641 032518 3.25MM LONG SHAFT CLOCK KEY BRASS
1641 035018 3.50MM LONG SHAFT CLOCK KEY BRASS
1641 037518 3.75MM LONG SHAFT CLOCK KEY BRASS
1641 040018 4.00MM LONG SHAFT CLOCK KEY BRASS
1641 042518 4.25MM LONG SHAFT CLOCK KEY BRASS
1641 045018 4.50MM LONG SHAFT CLOCK KEY BRASS
1641 047518 4.75MM LONG SHAFT CLOCK KEY BRASS
1641 050018 5.00MM LONG SHAFT CLOCK KEY BRASS
1641 052518 5.25MM LONG SHAFT CLOCK KEY BRASS
1641 055018 5.50MM LONG SHAFT CLOCK KEY BRASS
1641 057518 5.75MM LONG SHAFT CLOCK KEY BRASS
1641 060018 6.00MM LONG SHAFT CLOCK KEY BRASS
F0287 LONGCASE CRANK KEYS Brass with a wooden handle. Ideal for Longcase or Grandfather Clocks, Time Recorders.
0287 035015 LARGE CRANK KEY 3.50mm
0287 037515 LARGE CRANK KEY 3.75mm
0287 040015 LARGE CRANK KEY 4.00mm
0287 042515 LARGE CRANK KEY 4.25mm
0287 045015 LARGE CRANK KEY 4.50mm
0287 047515 LARGE CRANK KEY 4.75mm
0287 050015 LARGE CRANK KEY 5.00mm
0287 052515 LARGE CRANK KEY 5.25mm
0287 055015 LARGE CRANK KEY 5.50mm
0287 057515 LARGE CRANK KEY 5.75mm
0287 060015 LARGE CRANK KEY 6.00mm
0287 062515 LARGE CRANK KEY 6.25mm
0287 065015 LARGE CRANK KEY 6.50mm
0287 067515 LARGE CRANK KEY 6.75mm
0287 070015 LARGE CRANK KEY 7.00mm
F0241 WIRE HANDLED CRANK KEYS Brass key with steel handle.
0241 020015 WIRE HANDLED CRANK KEY 2.00mm
0241 022515 WIRE HANDLED CRANK KEY 2.25mm
0241 025015 WIRE HANDLED CRANK KEY 2.50mm
0241 027515 WIRE HANDLED CRANK KEY 2.75mm
0241 030015 WIRE HANDLED CRANK KEY 3.00mm
0241 032515 WIRE HANDLED CRANK KEY 3.25mm
0241 035015 WIRE HANDLED CRANK KEY 3.50mm
F0452 WATCH & BROCOT KEYS Plated key with brass handle. There are two numbering systems. One system uses size 12 as the largest, and the other uses the reverse. It is important to order by size and not by number.
0452 222215 WATCH & BROCOT KEY 0.95mm
0452 111115 WATCH & BROCOT KEY 1.00mm
0452 000115 WATCH & BROCOT KEY 1.05mm
0452 000215 WATCH & BROCOT KEY 1.15mm
0452 000315 WATCH & BROCOT KEY 1.20mm
0452 000415 WATCH & BROCOT KEY 1.30mm
0452 000515 WATCH & BROCOT KEY 1.40mm
0452 000615 WATCH & BROCOT KEY 1.50mm
0452 000715 WATCH & BROCOT KEY 1.60mm
0452 000815 WATCH & BROCOT KEY 1.65mm
0452 000915 WATCH & BROCOT KEY 1.75mm
0452 001015 WATCH & BROCOT KEY 1.80mm
0452 001115 WATCH & BROCOT KEY 1.90mm
0452 001215 WATCH & BROCOT KEY 2.00mm
F0398 DOUBLE ENDED KEYS Solid brass. The small end is between 1.75mm - 2.00mm depending on the type.
0398 020015 DOUBLE ENDED KEY 2.00mm Small end 1.75mm
0398 022515 DOUBLE-ENDED KEY 2.25mm Small end 1.75mm
0398 025015 DOUBLE-ENDED KEY 2.50mm Small end 1.75mm
0398 027515 DOUBLE-ENDED KEY 2.75mm Small end 1.75mm
0398 030015 DOUBLE-ENDED KEY 3.00mm Small end 1.75mm
0398 032515 DOUBLE-ENDED KEY 3.25mm Small end 1.75mm
0398 035015 DOUBLE-ENDED KEY 3.50mm Small end 1.75mm
0398 037515 DOUBLE-ENDED KEY 3.75mm Small end 1.75mm
0398 040015 DOUBLE-ENDED KEY 4.00mm Small end 1.75mm
0398 042515 DOUBLE-ENDED KEY 4.25mm Small end 1.75mm
0398 045015 DOUBLE-ENDED KEY 4.50mm Small end 1.75mm
0398 047515 DOUBLE-ENDED KEY 4.75mm Small end 1.75mm
F0643 ASSORTED SETTERS FOR ALARMS
0643 000315 ASSORTED WINDERS FOR ALARMS
0643 000115 ASSORTED SETTERS FOR ALARMS Small nickel assortment.
F0399 STAR KEYS
0399 000115 STAR KEY FOR WATCHES 2,4,6,8 & 10 For watch and Brocot adjuster keys. Size 2 = 1.75mm, size 4 = 1.60mm, size 6 = 1.40mm, size 8 = 1.20mm, size 10 = 1.05mm.
0399 000215 STAR KEY FOR WATCHES 3,5,7,9 & 11 For watch and Brocot adjuster keys. Size 3 = 1.65mm, size 5 = 1.50mm, size 7 = 1.30, size 9 = 1.15mm, size 11 = 1.00mm.
0399 030915 STAR KEY, SMALL - 5 PRONG 3,5,7,9 & 11 For workshop and auction saleroom use. Solid brass. 3.00, 3.50, 4.00, 4.50 & 5.00mm.
0399 081415 STAR KEY LARGE For workshop and auction saleroom use. Solid brass. 3.75, 4.25, 4.75 & 5.25mm
F0938 STEEL BOW KEYS The same style as the originals, but not quite the same quality.
0938 025014 STEEL BOW KEY 2.50mm
0938 027014 STEEL BOW KEY 2.70mm
0938 029014 STEEL BOW KEY 2.90mm
0938 031014 STEEL BOW KEY 3.10mm
0938 032014 STEEL BOW KEY 3.20mm
0938 033014 STEEL BOW KEY 3.30mm
0938 035014 STEEL BOW KEY 3.50mm
0938 037014 STEEL BOW KEY 3.70mm
0938 039014 STEEL BOW KEY 3.90mm
0938 042014 STEEL BOW KEY 4.20mm
0938 043014 STEEL BOW KEY 4.30mm
0938 045014 STEEL BOW KEY 4.50mm
0938 047014 STEEL BOW KEY 4.70mm
0938 050014 STEEL BOW KEY 5.00mm
0938 055014 STEEL BOW KEY 5.50mm
0938 057014 STEEL BOW KEY 5.70mm
0938 059014 STEEL BOW KEY 5.90mm
F0939 DOUBLE ENDED BUTTERFLY KEYS Steel. Small end is 1.75mm on keys up to 3.75mm, and 1.95mm on 4.00mm and above.
0939 032518 DOUBLE ENDED BUTTERFLY KEY 3.25mm
0939 035018 DOUBLE ENDED BUTTERFLY KEY 3.50mm
0939 037518 DOUBLE ENDED BUTTERFLY KEY 3.75mm
0939 040018 DOUBLE ENDED BUTTERFLY KEY 4.00mm
0939 042518 DOUBLE ENDED BUTTERFLY KEY 4.25mm
0939 045018 DOUBLE ENDED BUTTERFLY KEY 4.50mm
0939 047518 DOUBLE ENDED BUTTERFLY KEY 4.75mm
F0397 CARRIAGE CLOCK KEY
0397 040015 DOUBLE-ENDED CARRIAGE CLOCK KEY No.7: 3.8mm / 1.75mm
0397 042515 DOUBLE-ENDED CARRIAGE CLOCK KEY No.8: 4.00mm / 1.95mm
F1003 KEYS WITH MAKER'S NAME Stamped with the original logo. All 3.60mm.
1003 037518 KEY WITH MAKER'S NAME: ANSONIA
1004 037518 KEY WITH MAKER'S NAME: SETH THOMAS
1005 037518 KEY WITH MAKER'S NAME: NEW HAVEN
1480 037518 KEY WITH MAKER'S NAME: SESSIONS
1005 004318 KEY WITH MAKER'S NAME: WELCH
1478 037518 KEY WITH MAKER'S NAME: GILBERT
1477 037518 KEY WITH MAKER'S NAME: WATERBURY
F1482 DOUBLE-ENDED KEYS WITH MAKER'S NAMES For American clocks - styles may vary.
1482 000115 DOUBLE-ENDED NEW HAVEN BRASS KEY 3.6mm x 2mm
1483 000115 DOUBLE-ENDED INGRAHAM BRASS KEY 3.6mm x 2mm
1484 000115 DOUBLE-ENDED WATERBURY BRASS KEY 3.6mm x 1.8mm
1485 000115 DOUBLE-ENDED ANSONIA BRASS KEY 3.6mm x 1.8mm
1486 000115 DOUBLE-ENDED SESSIONS BRASS KEY 3.6mm x 1.8mm
1487 000115 DOUBLE-ENDED WELCH BRASS KEY 3.8mm x 2mm
1488 000115 DOUBLE-ENDED GILBERT BRASS KEY 3.6mm x 1.8mm
F0987 QUALITY CRANK KEY FOR VIENNA CLOCKS Made from solid brass, with a turned brass handle that rotates over a steel shaft. Ready for use, but with a few minutes 'ageing' with a polishing compound would look the genuine article.
0987 020015 QUALITY CRANK KEY FOR VIENNA CLOCK 2.00mm
0987 022515 QUALITY CRANK KEY FOR VIENNA CLOCK 2.25mm
0987 025015 QUALITY CRANK KEY FOR VIENNA CLOCK 2.50mm
0987 027515 QUALITY CRANK KEY FOR VIENNA CLOCK 2.75mm
0987 030015 QUALITY CRANK KEY FOR VIENNA CLOCK 3.00mm
F1100 MORBIER CRANK KEYS, STEEL Steel crank keys with a wooden handle.
1100 370015 MORBIER CRANK KEY 3.7mm STEEL
1100 390015 MORBIER CRANK KEY 3.9mm STEEL
1100 420015 MORBIER CRANK KEY 4.2mm STEEL
1100 430015 MORBIER CRANK KEY 4.3mm STEEL
1100 450015 MORBIER CRANK KEY 4.5mm STEEL
1100 470015 MORBIER CRANK KEY 4.7mm STEEL
1100 500015 MORBIER CRANK KEY 5.0mm STEEL
1100 550015 MORBIER CRANK KEY 5.5mm STEEL
1100 570015 MORBIER CRANK KEY 5.7mm STEEL
1100 590015 MORBIER CRANK KEY 5.9mm STEEL
F1114 MORBIER CRANK KEYS Brass crank keys with tapered square hole, polished or antique finish. Wooden handle.
1114 000115 MORBIER CRANK KEY FITS 4.50-5.25mm Polished.
1114 000218 MORBIER CRANK KEY FITS 4.50-5.25mm Antique.
1115 000315 MOREZ CRANK KEY FITS 4.00-4.50mm Polished.
1115 000418 MOREZ CRANK KEY FITS 4.00-4.50mm Antique.
F0216 MARBLACK SLATE BLACKING 125ML Illustrated instructions can be viewed online at www.marblack.com.
0216 012515 MARBLACK SLATE BLACKING 100ml
F0968 LEATHER WATCH & JEWELLERY POUCH
0968 071002 SUEDE WATCH & JEWELLERY POUCH Ideal for pocket watches and other gold and silver items. Protects from scratches and keeps them clean when not in use. 75 x 100mm. With draw strings.
F0981 RUST INHIBITING PAPER
0981 001015 RUST INHIBITING PAPER
F0995 MOTHER OF PEARL
0995 603315 MOTHER OF PEARL, RECTANGLES Guaranteed rectangle 15 x 33 x 1.5mm. 2 pcs.
0995 002415 MOTHER OF PEARL, SCRAPS Packs of 5 odd strips of 1.5mm thick 'scrap. Sizes vary, from approximately 25 x 30mm pieces upwards.
F0344N GAUGED STEEL CLOCK PINS Made from mild steel. Sold in bags of approximately 100.
0344 000114 GAUGED STEEL CLOCK PINS SIZE 1 Thin end: 0.30mm Thick end: 0.60mm Length 11mm
0344 000214 GAUGED STEEL CLOCK PINS SIZE 2 Thin end: 0.50mm Thick end: 0.80mm Length 11mm
0344 000314 GAUGED STEEL CLOCK PINS SIZE 3 Thin end: 0.60mm Thick end: 1.00mm Length 11mm
0344 000414 GAUGED STEEL CLOCK PINS SIZE 4 Thin end: 0.65mm Thick end: 1.10mm Length 14mm
0344 000514 GAUGED STEEL CLOCK PINS SIZE 5 Thin end: 0.75mm Thick end: 1.15mm Length 14mm
0344 000614 GAUGED STEEL CLOCK PINS SIZE 6 Thin end: 0.80mm Thick end: 1.20mm Length 14mm
0344 000714 GAUGED STEEL CLOCK PINS SIZE 7 Thin end: 1.10mm Thick end: 1.30mm. Length 15mm
0344 000814 GAUGED STEEL CLOCK PINS SIZE 8 Thin end: 1.10mm Thick end: 1.40mm. Length 15mm
0344 000914 GAUGED STEEL CLOCK PINS SIZE 9 Thin end: 1.15mm Thick end: 1.50mm. Length 15mm
0344 001014 GAUGED STEEL CLOCK PINS SIZE 10 Thin end: 1.20mm Thick end: 1.60mm. Length 16mm
0344 001114 GAUGED STEEL CLOCK PINS SIZE 11 Thin end: 1.30mm Thick end: 1.70mm. Length 16mm.
0344 001214 GAUGED STEEL CLOCK PINS SIZE 12 Thin end: 1.40mm Thick end: 1.75mm. Length 16mm.
0344 001314 GAUGED STEEL CLOCK PINS SIZE 13 Thin end: 1.10mm Thick end: 1.50mm. Length 15mm.
0344 001414 GAUGED STEEL CLOCK PINS SIZE 14 Thin end: 1.40mm Thick end: 1.80mm. Length 15mm.
F0344R GAUGED BRASS CLOCK PINS Made from brass. Sold in bags of approximately 100.
0344 000118 GAUGED BRASS CLOCK PINS SIZE 1 Thin end: 0.30mm Thick end: 0.60mm Length 11mm
0344 000218 GAUGED BRASS CLOCK PINS SIZE 2 Thin end: 0.50mm Thick end: 0.80mm Length 11mm
0344 000318 GAUGED BRASS CLOCK PINS SIZE 3 Thin end: 0.60mm Thick end: 1.00mm Length 11mm
0344 000418 GAUGED BRASS CLOCK PINS SIZE 4 Thin end: 0.65mm Thick end: 1.10mm Length 14mm
0344 000518 GAUGED BRASS CLOCK PINS SIZE 5 Thin end: 0.75mm Thick end: 1.15mm Length 14mm
0344 000618 GAUGED BRASS CLOCK PINS SIZE 6 Thin end: 0.80mm Thick end: 1.20mm Length 14mm
0344 000718 GAUGED BRASS CLOCK PINS SIZE 7 Thin end: 1.10mm Thick end: 1.30mm. Length 15mm
0344 000818 GAUGED BRASS CLOCK PINS SIZE 8 Thin end: 1.10mm Thick end: 1.40mm. Length 15mm
0344 000918 GAUGED BRASS CLOCK PINS SIZE 9 Thin end: 1.15mm Thick end: 1.50mm. Length 15mm
0344 001018 GAUGED BRASS CLOCK PINS SIZE 10 Thin end: 1.20mm Thick end: 1.60mm. Length 16mm.
0344 001118 GAUGED BRASS CLOCK PINS SIZE 11 Thin end: 1.30mm Thick end: 1.70mm. Length 16mm.
0344 001218 GAUGED BRASS CLOCK PINS SIZE 12 Thin end: 1.40mm Thick end: 1.75mm. Length 16mm.
F0343 UNIVERSAL PINS
0343 010014 UNIVERSAL STEEL CLOCK PINS Tapered pins made from mild steel. Thin end 0.70mm, thick end 1.80mm. Length 25mm. Approximately 100 per bag.
0343 010018 UNIVERSAL BRASS CLOCK PINS Tapered pins made from solid brass. Thin end 0.70mm, thick end 1.80mm. Length 25mm. Approximately 100 per bag.
0343 210014 UNIVERSAL STEEL CLOCK PINS Size B Tapered pins made from mild steel. Thin end 0.30mm, thick end 1.27mm. Length 25mm. Approximately 100 per bag.
0343 310014 UNIVERSAL STEEL CLOCK PINS Size C Tapered pins made from mild steel. Thin end 0.76mm, thick end 1.65mm. Length 25mm. Approximately 100 per bag.
0343 410014 UNIVERSAL STEEL CLOCK PINS Size D Tapered pins made from mild steel. Thin end 1.14mm, thick end 1.91mm. Length 25mm. Approximately 100 per bag.
0343 510014 UNIVERSAL STEEL CLOCK PINS Size E Tapered pins made from mild steel. Thin end 1.50mm, thick end 2.40mm. Length 25mm. Approximately 100 per bag.
0343 120014 Universal pin pack. 4 of 3 types of pins. 12 pins in total. These tapered pins can be used to fit at least four holes in the range 0.30mm through to 2.6mm. Pack contains 4 of each of our B, D & Large pins. Insert the pins and cut off the surplus.
F0680 LARGE TAPERED STEEL CLOCK PINS
0680 005014 LARGE TAPERED STEEL CLOCK PINS For fixing large dials to their plates etc. Steel, tapered from 1.8mm - 2.6mm. Length 32mm. 50 per pack. Soft.
F0927 CLOCK DIAL PINS
0927 002014 CLOCK DIAL PINS For Longcase dials and false plates. Tapering from 2.75mm to only 1.5mm over a 2inch length. Packs of 20. Natural steel (9SMnPb36) finish.
F0343A PIN ASSORTMENTS
0344 014414 CLOCK PIN ASSORTMENT. 144 STEEL This can be 'topped up' with any of the sizes you use regularly from the individual packs. Mixed sizes of steel only, in packs of approximately 144.
0344 014415 CLOCK PIN ASSORTMENT. 144 MIXED BRASS & STEEL This can be 'topped up' with any of the sizes you use regularly from the individual packs. Mixed sizes of brass and steel in packs of approximately 144.
0344 024014 GAUGED STEEL CLOCK PINS 1-12 = 240 BOXED This can be 'topped up' with any of the sizes you use regularly from the individual packs.
0344 024018 GAUGED BRASS CLOCK PINS 1-12 = 240 BOXED This can be 'topped up' with any of the sizes you use regularly from the individual packs.
0344 011214 PIN ASSORTMENT. 3 GROSS, STEEL This can be 'topped up' with any of the sizes you use regularly from the individual packs. Three gross (432) of steel pins segregated according to size.
0344 011218 PIN ASSORTMENT. 3 GROSS, BRASS. This can be 'topped up' with any of the sizes you use regularly from the individual packs. Three gross (432) of brass pins segregated according to size.
F0334 CLOCK BUSH ASSORTMENTS Set of boxed brass bushes for fitting by hand or with the Bergeon bushing outfit. Replacements available in packs of 10 or 100 of any one size.
0334 416615 CLOCK BUSH ASSORTMENT - POPULAR SET 1-30 225 pcs. Sizes 1-30.
0334 545615 CLOCK BUSH ASSORTMENT - POPULAR SET 31-60 225 pcs. Sizes 31-60.
1093 671715 CLOCK BUSH ASSORTMENT BRASS 210 pcs. Sizes 101-130.
0334 548815 CLOCK BUSH ASSORTMENT FULL SET 450 pcs. Sizes 1-60.
F0334A CLOCK BUSHES, BRASS, IN 10's Sizes 1 to 60 available.
0334 200015 CLOCK BUSHES, BRASS, 10 OF SIZE 00 Hole: 0.30. Length: 2.80. O/D 2.00mm.
0334 100015 CLOCK BUSHES, BRASS, 10 OF SIZE 0 Hole: 0.40. Length: 2.80. O/D 2.00mm.
0334 100115 CLOCK BUSHES, BRASS, 10 OF SIZE 1 Hole: 0.40. Length: 1.50. O/D 2.00mm.
0334 100215 CLOCK BUSHES, BRASS, 10 OF SIZE 2 Hole: 0.50. Length: 1.50. O/D 2.00mm.
0334 100315 CLOCK BUSHES, BRASS, 10 OF SIZE 3 Hole: 0.60. Length: 1.50. O/D 2.00mm.
0334 100415 CLOCK BUSHES, BRASS, 10 OF SIZE 4 Hole: 0.60. Length: 3.00. O/D 2.00mm.
0334 100515 CLOCK BUSHES, BRASS, 10 OF SIZE 5 Hole: 0.70. Length: 1.50. O/D 2.00mm.
0334 100615 CLOCK BUSHES, BRASS, 10 OF SIZE 6 Hole: 0.70. Length: 3.00. O/D 2.00mm.
0334 100715 CLOCK BUSHES, BRASS, 10 OF SIZE 7 Hole: 0.80. Length: 1.50. O/D 2.50mm.
0334 100815 CLOCK BUSHES, BRASS, 10 OF SIZE 8 Hole: 0.80. Length: 3.00. O/D 2.50mm.
0334 100915 CLOCK BUSHES, BRASS, 10 OF SIZE 9 Hole: 0.90. Length: 1.50. O/D 2.50mm.
0334 101015 CLOCK BUSHES, BRASS, 10 OF SIZE 10 Hole: 0.90. Length: 3.00. O/D 2.50mm.
0334 101115 CLOCK BUSHES, BRASS, 10 OF SIZE 11 Hole: 1.00. Length: 1.50. O/D 3.00mm.
0334 101215 CLOCK BUSHES, BRASS, 10 OF SIZE 12 Hole: 1.00. Length: 3.00. O/D 3.00mm.
0334 101315 CLOCK BUSHES, BRASS, 10 OF SIZE 13 Hole: 1.25. Length: 1.50. O/D 3.00mm.
0334 101415 CLOCK BUSHES, BRASS, 10 OF SIZE 14 Hole: 1.25. Length: 3.00. O/D 3.00mm.
0334 101515 CLOCK BUSHES, BRASS, 10 OF SIZE 15 Hole: 1.50. Length: 1.50. O/D 3.50mm.
0334 101615 CLOCK BUSHES, BRASS, 10 OF SIZE 16 Hole: 1.50. Length: 3.00. O/D 3.50mm.
0334 101715 CLOCK BUSHES, BRASS, 10 OF SIZE 17 Hole: 1.75. Length: 1.50. O/D 3.50mm.
0334 101815 CLOCK BUSHES, BRASS, 10 OF SIZE 18 Hole: 1.75. Length: 3.00. O/D 3.50mm.
0334 101915 CLOCK BUSHES, BRASS, 10 OF SIZE 19 Hole: 2.00. Length: 1.50. O/D 4.50mm.
0334 102015 CLOCK BUSHES, BRASS, 10 OF SIZE 20 Hole: 2.00. Length: 3.00. O/D 4.50mm.
0334 102115 CLOCK BUSHES, BRASS, 10 OF SIZE 21 Hole: 2.25. Length: 1.50. O/D 4.50mm.
0334 102215 CLOCK BUSHES, BRASS, 10 OF SIZE 22 Hole: 2.25. Length: 3.00. O/D 4.50mm.
0334 102315 CLOCK BUSHES, BRASS, 10 OF SIZE 23 Hole: 2.50. Length: 1.50. O/D 4.50mm.
0334 102415 CLOCK BUSHES, BRASS, 10 OF SIZE 24 Hole: 2.50. Length: 3.00. O/D 4.50mm.
0334 102515 CLOCK BUSHES, BRASS, 10 OF SIZE 25 Hole: 3.00. Length: 1.50. O/D 5.50mm.
0334 102615 CLOCK BUSHES, BRASS, 10 OF SIZE 26 Hole: 3.00. Length: 3.00. O/D 5.50mm.
0334 102715 CLOCK BUSHES, BRASS, 10 OF SIZE 27 Hole: 4.00. Length: 1.50. O/D 6.50mm.
0334 102815 CLOCK BUSHES, BRASS, 10 OF SIZE 28 Hole: 4.00. Length: 3.00. O/D 6.50mm.
0334 102915 CLOCK BUSHES, BRASS, 10 OF SIZE 29 Hole: 5.00. Length: 3.00. O/D 7.50mm.
0334 103015 CLOCK BUSHES, BRASS, 10 OF SIZE 30 Hole: 6.30. Length: 3.00. O/D 8.50mm.
0334 103115 CLOCK BUSHES, BRASS, 10 OF SIZE 31 Hole: 0.30. Length: 1.50. O/D 2.00mm.
0334 103215 CLOCK BUSHES, BRASS, 10 OF SIZE 32 Hole: 0.35. Length: 1.50. O/D 2.00mm.
0334 103315 CLOCK BUSHES, BRASS, 10 OF SIZE 33 Hole: 0.40. Length: 2.00. O/D 2.00mm.
0334 103415 CLOCK BUSHES, BRASS, 10 OF SIZE 34 Hole: 0.45. Length: 2.00. O/D 2.00mm.
0334 103515 CLOCK BUSHES, BRASS, 10 OF SIZE 35 Hole: 0.50. Length: 1.20. O/D 2.00mm.
0334 103615 CLOCK BUSHES, BRASS, 10 OF SIZE 36 Hole: 0.50. Length: 2.00. O/D 2.00mm.
0334 103715 CLOCK BUSHES, BRASS, 10 OF SIZE 37 Hole: 0.55. Length: 1.50. O/D 2.00mm.
0334 103815 CLOCK BUSHES, BRASS, 10 OF SIZE 38 Hole: 0.65. Length: 2.00. O/D 2.00mm.
0334 103915 CLOCK BUSHES, BRASS, 10 OF SIZE 39 Hole: 0.75. Length: 2.00. O/D 2.00mm.
0334 104015 CLOCK BUSHES, BRASS, 10 OF SIZE 40 Hole: 0.85. Length: 2.00. O/D 2.50mm.
0334 104115 CLOCK BUSHES, BRASS, 10 OF SIZE 41 Hole: 0.95. Length: 1.20. O/D 2.50mm.
0334 104215 CLOCK BUSHES, BRASS, 10 OF SIZE 42 Hole: 1.00. Length: 2.00. O/D 3.00mm.
0334 104315 CLOCK BUSHES, BRASS, 10 OF SIZE 43 Hole: 1.10. Length: 2.00. O/D 3.00mm.
0334 104415 CLOCK BUSHES, BRASS, 10 OF SIZE 44 Hole: 1.20. Length: 2.00. O/D 3.00mm.
0334 104515 CLOCK BUSHES, BRASS, 10 OF SIZE 45 Hole: 1.25. Length: 2.00. O/D 3.00mm.
0334 104615 CLOCK BUSHES, BRASS, 10 OF SIZE 46 Hole: 1.30. Length: 2.00. O/D 3.00mm.
0334 104715 CLOCK BUSHES, BRASS, 10 OF SIZE 47 Hole: 1.40. Length: 2.00. O/D 3.50mm.
0334 104815 CLOCK BUSHES, BRASS, 10 OF SIZE 48 Hole: 1.50. Length: 2.00. O/D 3.50mm.
0334 104915 CLOCK BUSHES, BRASS, 10 OF SIZE 49 Hole: 1.60. Length: 1.50. O/D 3.50mm.
0334 105015 CLOCK BUSHES, BRASS, 10 OF SIZE 50 Hole: 1.65. Length: 2.00. O/D 3.50mm.
0334 105115 CLOCK BUSHES, BRASS, 10 OF SIZE 51 Hole: 1.70. Length: 2.00. O/D 3.50mm.
0334 105215 CLOCK BUSHES, BRASS, 10 OF SIZE 52 Hole: 1.80. Length: 2.00. O/D 3.50mm.
0334 105315 CLOCK BUSHES, BRASS, 10 OF SIZE 53 Hole: 1.90. Length: 2.00. O/D 3.50mm.
0334 105415 CLOCK BUSHES, BRASS, 10 OF SIZE 54 Hole: 2.00. Length: 2.00. O/D 4.50mm.
0334 105515 CLOCK BUSHES, BRASS, 10 OF SIZE 55 Hole: 2.10. Length: 2.00. O/D 4.50mm.
0334 105615 CLOCK BUSHES, BRASS, 10 OF SIZE 56 Hole: 2.25. Length: 2.00. O/D 4.50mm.
0334 105715 CLOCK BUSHES, BRASS, 10 OF SIZE 57 Hole: 2.40. Length: 2.00. O/D 4.50mm.
0334 105815 CLOCK BUSHES, BRASS, 10 OF SIZE 58 Hole: 2.75. Length: 2.00. O/D 4.50mm.
0334 105915 CLOCK BUSHES, BRASS, 10 OF SIZE 59 Hole: 5.00. Length: 2.00. O/D 8.50mm.
0334 106015 CLOCK BUSHES, BRASS, 10 OF SIZE 60 Hole: 6.50. Length: 2.00. O/D 8.50mm.
F0334B CLOCK BUSHES, BRASS, IN 100's Sizes 1 to 60 available.
0334 200215 CLOCK BUSHES, BRASS, 100 OF SIZE 00 I/D 0.30. Length: 2.80. O/D 2.00mm.
0334 200115 CLOCK BUSHES, BRASS, 100 OF SIZE 0 I/D 0.40. Length: 2.80. O/D 2.00mm.
0334 000115 CLOCK BUSHES, BRASS, 100 OF SIZE 1 I/D 0.40. Length: 1.50. O/D 2.00mm.
0334 000215 CLOCK BUSHES, BRASS, 100 OF SIZE 2 I/D 0.50. Length: 1.50. O/D 2.00mm.
0334 000315 CLOCK BUSHES, BRASS, 100 OF SIZE 3 I/D 0.60. Length: 1.50. O/D 2.00mm.
0334 000415 CLOCK BUSHES, BRASS, 100 OF SIZE 4 I/D 0.60. Length: 3.00. O/D 2.00mm.
0334 000515 CLOCK BUSHES, BRASS, 100 OF SIZE 5 I/D 0.70. Length: 1.50. O/D 2.00mm.
0334 000615 CLOCK BUSHES, BRASS, 100 OF SIZE 6 I/D 0.70. Length: 3.00. O/D 2.00mm.
0334 000715 CLOCK BUSHES, BRASS, 100 OF SIZE 7 I/D 0.80. Length: 1.50. O/D 2.50mm.
0334 000815 CLOCK BUSHES, BRASS, 100 OF SIZE 8 I/D 0.80. Length: 3.00. O/D 2.50mm.
0334 000915 CLOCK BUSHES, BRASS, 100 OF SIZE 9 I/D 0.90. Length: 1.50. O/D 2.50mm.
0334 001015 CLOCK BUSHES, BRASS, 100 OF SIZE 10 I/D 0.90. Length: 3.00. O/D 2.50mm.
0334 001115 CLOCK BUSHES, BRASS, 100 OF SIZE 11 I/D 1.00. Length: 1.50. O/D 3.00mm.
0334 001215 CLOCK BUSHES, BRASS, 100 OF SIZE 12 I/D 1.00. Length: 3.00. O/D 3.00mm.
0334 001315 CLOCK BUSHES, BRASS, 100 OF SIZE 13 I/D 1.25. Length: 1.50. O/D 3.00mm.
0334 001415 CLOCK BUSHES, BRASS, 100 OF SIZE 14 I/D 1.25. Length: 3.00. O/D 3.00mm.
0334 001515 CLOCK BUSHES, BRASS, 100 OF SIZE 15 I/D 1.50. Length: 1.50. O/D 3.50mm.
0334 001615 CLOCK BUSHES, BRASS, 100 OF SIZE 16 I/D 1.50. Length: 3.00. O/D 3.50mm.
0334 001715 CLOCK BUSHES, BRASS, 100 OF SIZE 17 I/D 1.75. Length: 1.50. O/D 3.50mm.
0334 001815 CLOCK BUSHES, BRASS, 100 OF SIZE 18 I/D 1.75. Length: 3.00. O/D 3.50mm.
0334 001915 CLOCK BUSHES, BRASS, 100 OF SIZE 19 I/D 2.00. Length: 1.50. O/D 4.50mm.
0334 002015 CLOCK BUSHES, BRASS, 100 OF SIZE 20 I/D 2.00. Length: 3.00. O/D 4.50mm.
0334 002115 CLOCK BUSHES, BRASS, 100 OF SIZE 21 I/D 2.25. Length: 1.50. O/D 4.50mm.
0334 002215 CLOCK BUSHES, BRASS, 100 OF SIZE 22 I/D 2.25. Length: 3.00. O/D 4.50mm.
0334 002315 CLOCK BUSHES, BRASS, 100 OF SIZE 23 I/D 2.50. Length: 1.50. O/D 4.50mm.
0334 002415 CLOCK BUSHES, BRASS, 100 OF SIZE 24 I/D 2.50. Length: 3.00. O/D 4.50mm.
0334 002515 CLOCK BUSHES, BRASS, 100 OF SIZE 25 I/D 3.00. Length: 1.50. O/D 5.50mm.
0334 002615 CLOCK BUSHES, BRASS, 100 OF SIZE 26 I/D 3.00. Length: 3.00. O/D 5.50mm.
0334 002715 CLOCK BUSHES, BRASS, 100 OF SIZE 27 I/D 4.00. Length: 1.50. O/D 6.50mm.
0334 002815 CLOCK BUSHES, BRASS, 100 OF SIZE 28 I/D 4.00. Length: 3.00. O/D 6.50mm.
0334 002915 CLOCK BUSHES, BRASS, 100 OF SIZE 29 I/D 5.00. Length: 3.00. O/D 7.50mm.
0334 003015 CLOCK BUSHES, BRASS, 100 OF SIZE 30 I/D 6.30. Length: 3.00. O/D 8.50mm.
0334 003115 CLOCK BUSHES, BRASS, 100 OF SIZE 31 I/D 0.30. Length: 1.50. O/D 2.00mm.
0334 003215 CLOCK BUSHES, BRASS, 100 OF SIZE 32 I/D 0.35. Length: 1.50. O/D 2.00mm.
0334 003315 CLOCK BUSHES, BRASS, 100 OF SIZE 33 I/D 0.40. Length: 2.00. O/D 2.00mm.
0334 003415 CLOCK BUSHES, BRASS, 100 OF SIZE 34 I/D 0.45. Length: 2.00. O/D 2.00mm.
0334 003515 CLOCK BUSHES, BRASS, 100 OF SIZE 35 I/D 0.50. Length: 1.20. O/D 2.00mm.
0334 003615 CLOCK BUSHES, BRASS, 100 OF SIZE 36 I/D 0.50. Length: 2.00. O/D 2.00mm.
0334 003715 CLOCK BUSHES, BRASS, 100 OF SIZE 37 I/D 0.55. Length: 1.50. O/D 2.00mm.
0334 003815 CLOCK BUSHES, BRASS, 100 OF SIZE 38 I/D 0.65. Length: 2.00. O/D 2.00mm.
0334 003915 CLOCK BUSHES, BRASS, 100 OF SIZE 39 I/D 0.75. Length: 2.00. O/D 2.00mm.
0334 004015 CLOCK BUSHES, BRASS, 100 OF SIZE 40 I/D 0.85. Length: 2.00. O/D 2.50mm.
0334 004115 CLOCK BUSHES, BRASS, 100 OF SIZE 41 I/D 0.95. Length: 1.20. O/D 2.50mm.
0334 004215 CLOCK BUSHES, BRASS, 100 OF SIZE 42 I/D 1.00. Length: 2.00. O/D 3.00mm.
0334 004315 CLOCK BUSHES, BRASS, 100 OF SIZE 43 I/D 1.10. Length: 2.00. O/D 3.00mm.
0334 004415 CLOCK BUSHES, BRASS, 100 OF SIZE 44 I/D 1.20. Length: 2.00. O/D 3.00mm.
0334 004515 CLOCK BUSHES, BRASS, 100 OF SIZE 45 I/D 1.25. Length: 2.00. O/D 3.00mm.
0334 004615 CLOCK BUSHES, BRASS, 100 OF SIZE 46 I/D 1.30. Length: 2.00. O/D 3.00mm.
0334 004715 CLOCK BUSHES, BRASS, 100 OF SIZE 47 I/D 1.40. Length: 2.00. O/D 3.50mm.
0334 004815 CLOCK BUSHES, BRASS, 100 OF SIZE 48 I/D 1.50. Length: 2.00. O/D 3.50mm.
0334 004915 CLOCK BUSHES, BRASS, 100 OF SIZE 49 I/D 1.60. Length: 1.50. O/D 3.50mm.
0334 005015 CLOCK BUSHES, BRASS, 100 OF SIZE 50 I/D 1.65. Length: 2.00. O/D 3.50mm.
0334 005115 CLOCK BUSHES, BRASS, 100 OF SIZE 51 I/D 1.70. Length: 2.00. O/D 3.50mm.
0334 005215 CLOCK BUSHES, BRASS, 100 OF SIZE 52 I/D 1.80. Length: 2.00. O/D 3.50mm.
0334 005315 CLOCK BUSHES, BRASS, 100 OF SIZE 53 I/D 1.90. Length: 2.00. O/D 3.50mm.
0334 005415 CLOCK BUSHES, BRASS, 100 OF SIZE 54 I/D 2.00. Length: 2.00. O/D 4.50mm.
0334 005515 CLOCK BUSHES, BRASS, 100 OF SIZE 55 I/D 2.10. Length: 2.00. O/D 4.50mm.
0334 005615 CLOCK BUSHES, BRASS, 100 OF SIZE 56 I/D 2.25. Length: 2.00. O/D 4.50mm.
0334 005715 CLOCK BUSHES, BRASS, 100 OF SIZE 57 I/D 2.40. Length: 2.00. O/D 4.50mm.
0334 005815 CLOCK BUSHES, BRASS, 100 OF SIZE 58 I/D 2.75. Length: 2.00. O/D 4.50mm.
0334 005915 CLOCK BUSHES, BRASS, 100 OF SIZE 59 I/D 5.00. Length: 2.00. O/D 8.50mm.
0334 006015 CLOCK BUSHES, BRASS, 100 OF SIZE 60 I/D 6.50. Length: 2.00. O/D 8.50mm.
F1093A CLOCK LARGE BRASS BUSHES, PACK OF 10
1093 110115 CLOCK LARGE BRASS BUSHES, NO. 101 x 10 I/D 0.80. Length: 5.00. O/D 2.00mm.
1093 110215 CLOCK LARGE BRASS BUSHES, NO. 102 x 10 I/D 1.00. Length: 5.00. O/D 2.00mm.
1093 110315 CLOCK LARGE BRASS BUSHES, NO. 103 x 10 I/D 0.80. Length: 5.00. O/D 2.50mm.
1093 110415 CLOCK LARGE BRASS BUSHES, NO. 104 x 10 I/D 1.20. Length: 5.00. O/D 2.50mm.
1093 110515 CLOCK LARGE BRASS BUSHES, NO. 105 x 10 I/D 1.20. Length: 5.00. O/D 3.00mm.
1093 110615 CLOCK LARGE BRASS BUSHES, NO. 106 x 10 I/D 1.40. Length: 5.00. O/D 2.50mm.
1093 110715 CLOCK LARGE BRASS BUSHES, NO. 107 x 10 I/D 1.40. Length: 5.00. O/D 3.00mm.
1093 110815 CLOCK LARGE BRASS BUSHES, NO. 108 x 10 I/D 1.60. Length: 5.00. O/D 3.00mm.
1093 110915 CLOCK LARGE BRASS BUSHES, NO. 109 x 10 I/D 1.60. Length: 5.00. O/D 3.50mm.
1093 111015 CLOCK LARGE BRASS BUSHES, NO. 110 x 10 I/D 1.80. Length: 5.00. O/D 3.00mm.
1093 111115 CLOCK LARGE BRASS BUSHES, NO. 111 x 10 I/D 1.80. Length: 5.00. O/D 3.50mm.
1093 111215 CLOCK LARGE BRASS BUSHES, NO. 112 x 10 I/D 2.00. Length: 5.00. O/D 3.50mm.
1093 111315 CLOCK LARGE BRASS BUSHES, NO. 113 x 10 I/D 2.00. Length: 5.00. O/D 4.00mm.
1093 111415 CLOCK LARGE BRASS BUSHES, NO. 114 x 10 I/D 2.20. Length: 5.00. O/D 3.50mm.
1093 111515 CLOCK LARGE BRASS BUSHES, NO. 115 x 10 I/D 2.20. Length: 5.00. O/D 4.00mm.
1093 111615 CLOCK LARGE BRASS BUSHES, NO. 116 x 10 I/D 2.40. Length: 5.00. O/D 3.50mm.
1093 111715 CLOCK LARGE BRASS BUSHES, NO. 117 x 10 I/D 2.40. Length: 5.00. O/D 4.00mm.
1093 111815 CLOCK LARGE BRASS BUSHES, NO. 118 x 10 I/D 2.60. Length: 5.00. O/D 3.50mm.
1093 111915 CLOCK LARGE BRASS BUSHES, NO. 119 x 10 I/D 2.60. Length: 5.00. O/D 4.00mm.
1093 112015 CLOCK LARGE BRASS BUSHES, NO. 120 x 10 I/D 2.80. Length: 5.00. O/D 4.00mm.
1093 112115 CLOCK LARGE BRASS BUSHES, NO. 121 x 10 I/D 3.00. Length: 5.00. O/D 4.50mm.
1093 112215 CLOCK LARGE BRASS BUSHES, NO. 122 x 10 I/D 4.00. Length: 5.00. O/D 6.00mm.
1093 112315 CLOCK LARGE BRASS BUSHES, NO. 123 x 10 I/D 4.50. Length: 5.00. O/D 6.50mm.
1093 112415 CLOCK LARGE BRASS BUSHES, NO. 124 x 10 I/D 5.00. Length: 5.00. O/D 7.00mm.
1093 112515 CLOCK LARGE BRASS BUSHES, NO. 125 x 10 I/D 6.00. Length: 5.00. O/D 8.00mm.
1093 112615 CLOCK LARGE BRASS BUSHES, NO. 126 x 10 I/D 6.50. Length: 5.00. O/D 8.50mm.
1093 112715 CLOCK LARGE BRASS BUSHES, NO. 127 x 10 Length: 5.00. O/D 3.00mm.
1093 112815 CLOCK LARGE BRASS BUSHES, NO. 128 x 10 Length: 5.00. O/D 4.00mm.
1093 112915 CLOCK LARGE BRASS BUSHES, NO. 129 x 10 Length: 5.00. O/D 5.00mm.
1093 113015 CLOCK LARGE BRASS BUSHES, NO. 130 x 10 Length: 5.00. O/D 6.00mm.
F1093B CLOCK LARGE BRASS BUSHES, PACK OF 100 Available in sizes 101 to 130.
1093 010115 CLOCK LARGE BRASS BUSHES, NO. 101 x 100 I/D 0.80. Length: 5.00. O/D 2.00mm.
1093 010215 CLOCK LARGE BRASS BUSHES, NO. 102 x 100 I/D 1.00. Length: 5.00. O/D 2.00mm.
1093 010315 CLOCK LARGE BRASS BUSHES, NO. 103 x 100 I/D 1.00. Length: 5.00. O/D 2.50mm.
1093 010415 CLOCK LARGE BRASS BUSHES, NO. 104 x 100 I/D 1.20. Length: 5.00. O/D 2.50mm.
1093 010515 CLOCK LARGE BRASS BUSHES, NO. 105 x 100 I/D 1.20. Length: 5.00. O/D 3.00mm.
1093 010615 CLOCK LARGE BRASS BUSHES, NO. 106 x 100 I/D 1.40. Length: 5.00. O/D 2.50mm.
1093 010715 CLOCK LARGE BRASS BUSHES, NO. 107 x 100 I/D 1.40. Length: 5.00. O/D 3.00mm.
1093 010815 CLOCK LARGE BRASS BUSHES, NO. 108 x 100 I/D 1.60. Length: 5.00. O/D 3.00mm.
1093 010915 CLOCK LARGE BRASS BUSHES, NO. 109 x 100 I/D 1.60. Length: 5.00. O/D 3.50mm.
1093 011015 CLOCK LARGE BRASS BUSHES, NO. 110 x 100 I/D 1.80. Length: 5.00. O/D 3.00mm.
1093 011115 CLOCK LARGE BRASS BUSHES, NO. 111 x 100 I/D 1.80. Length: 5.00. O/D 3.50mm.
1093 011215 CLOCK LARGE BRASS BUSHES, NO. 112 x 100 I/D 2.00. Length: 5.00. O/D 3.50mm.
1093 011315 CLOCK LARGE BRASS BUSHES, NO. 113 x 100 I/D 2.00. Length: 5.00. O/D 4.00mm.
1093 011415 CLOCK LARGE BRASS BUSHES, NO. 114 x 100 I/D 2.20. Length: 5.00. O/D 3.50mm.
1093 011515 CLOCK LARGE BRASS BUSHES, NO. 115 x 100 I/D 2.20. Length: 5.00. O/D 4.00mm.
1093 011615 CLOCK LARGE BRASS BUSHES, NO. 116 x 100 I/D 2.40. Length: 5.00. O/D 3.50mm.
1093 011715 CLOCK LARGE BRASS BUSHES, NO. 117 x 100 I/D 2.40. Length: 5.00. O/D 4.00mm.
1093 011815 CLOCK LARGE BRASS BUSHES, NO. 118 x 100 I/D 2.60. Length: 5.00. O/D 3.50mm.
1093 011915 CLOCK LARGE BRASS BUSHES, NO. 119 x 100 I/D 2.60. Length: 5.00. O/D 4.00mm.
1093 012015 CLOCK LARGE BRASS BUSHES, NO. 120 x 100 I/D 2.80. Length: 5.00. O/D 4.00mm.
1093 012115 CLOCK LARGE BRASS BUSHES, NO. 121 x 100 I/D 3.00. Length: 5.00. O/D 4.50mm.
1093 012215 CLOCK LARGE BRASS BUSHES, NO. 122 x 100 I/D 4.00. Length: 5.00. O/D 6.00mm.
1093 012315 CLOCK LARGE BRASS BUSHES, NO. 123 x 100 I/D 4.50. Length: 5.00. O/D 6.50mm.
1093 012415 CLOCK LARGE BRASS BUSHES, NO. 124 x 100 I/D 5.00. Length: 5.00. O/D 7.00mm.
1093 012515 CLOCK LARGE BRASS BUSHES, NO. 125 x 100 I/D 6.00. Length: 5.00. O/D 8.00mm.
1093 012615 CLOCK LARGE BRASS BUSHES, NO. 126 x 100 I/D 6.50. Length: 5.00. O/D 8.50mm.
1093 012715 CLOCK LARGE BRASS BUSHES, NO. 127 x 100 Length: 5.00. O/D 3.00mm.
1093 012815 CLOCK LARGE BRASS BUSHES, NO. 128 x 100 Length: 5.00. O/D 4.00mm.
1093 012915 CLOCK LARGE BRASS BUSHES, NO. 129 x 100 Length: 5.00. O/D 5.00mm.
1093 013015 CLOCK LARGE BRASS BUSHES, NO. 130 x 100 Length: 5.00. O/D 6.00mm.
F0389S FRENCH CLOCK BUSHES With shafts. 10 pcs per pack, assorted. Useful for replacing individual sizes found in assortment boxes.
0389 201215 FRENCH CLOCK BUSHES: O/D 1.0mm L = 6mm Pack of 10 replacement French clock bushes with hole size of 0.12mm.
0389 201415 FRENCH CLOCK BUSHES: O/D 1.0mm L = 6mm Pack of 10 replacement French clock bushes with hole size of 0.14mm.
0389 201615 FRENCH CLOCK BUSHES: O/D 1.0mm L = 6mm Pack of 10 replacement French clock bushes with hole size of 0.16mm.
0389 201815 FRENCH CLOCK BUSHES: O/D 1.0mm L = 6mm Pack of 10 replacement French clock bushes with hole size of 0.18mm.
0389 202015 FRENCH CLOCK BUSHES: O/D 1.0mm L = 6mm Pack of 10 replacement French clock bushes with hole size of 0.20mm.
0389 202215 FRENCH CLOCK BUSHES: O/D 1.0mm L = 6mm Pack of 10 replacement French clock bushes with hole size of 0.22mm.
0389 202415 FRENCH CLOCK BUSHES: O/D 1.0mm L = 6mm Pack of 10 replacement French clock bushes with hole size of 0.24mm.
0389 202615 FRENCH CLOCK BUSHES: O/D 1.0mm L = 6mm Pack of 10 replacement French clock bushes with hole size of 0.26mm.
0389 202815 FRENCH CLOCK BUSHES: O/D 1.0mm L = 6mm Pack of 10 replacement French clock bushes with hole size of 0.28mm.
0389 203015 FRENCH CLOCK BUSHES: O/D 1.0mm L = 6mm Pack of 10 replacement French clock bushes with hole size of 0.30mm.
0389 523615 FRENCH CLOCK BUSHES: O/D 1.4mm L = 7mm Pack of 10 replacement French clock bushes with hole size of 0.36mm.
0389 523815 FRENCH CLOCK BUSHES: O/D 1.4mm L = 7mm Pack of 10 replacement French clock bushes with hole size of 0.38mm.
0389 524015 FRENCH CLOCK BUSHES: O/D 1.4mm L = 7mm Pack of 10 replacement French clock bushes with hole size of 0.40mm.
0389 524215 FRENCH CLOCK BUSHES: O/D 1.4mm L = 7mm Pack of 10 replacement French clock bushes with hole size of 0.42mm.
0389 524415 FRENCH CLOCK BUSHES: O/D 1.4mm L = 7mm Pack of 10 replacement French clock bushes with hole size of 0.44mm.
0389 524615 FRENCH CLOCK BUSHES: O/D 1.7mm L = 7.5mm Pack of 10 replacement French clock bushes with hole size of 0.46mm.
0389 524815 FRENCH CLOCK BUSHES: O/D 1.7mm L = 8.5mm Pack of 10 replacement French clock bushes with hole size of 0.48mm.
0389 525015 FRENCH CLOCK BUSHES: O/D 1.7mm L = 9mm Pack of 10 replacement French clock bushes with hole size of 0.50mm.
0389 525215 FRENCH CLOCK BUSHES: O/D 1.7mm L = 9mm Pack of 10 replacement French clock bushes with hole size of 0.52mm.
0389 525515 FRENCH CLOCK BUSHES: O/D 1.8mm L = 9mm Pack of 10 replacement French clock bushes with hole size of 0.55mm.
0389 535815 FRENCH CLOCK BUSHES: O/D 1.9mm L = 9mm Pack of 10 replacement French clock bushes with hole size of 0.58mm.
0389 536115 FRENCH CLOCK BUSHES: O/D 1.9mm L = 9mm Pack of 10 replacement French clock bushes with hole size of 0.61mm.
0389 536415 FRENCH CLOCK BUSHES: O/D 1.9mm L = 9mm Pack of 10 replacement French clock bushes with hole size of 0.64mm.
0389 536715 FRENCH CLOCK BUSHES: O/D 1.9mm L = 9mm Pack of 10 replacement French clock bushes with hole size of 0.67mm.
0389 537015 FRENCH CLOCK BUSHES: O/D 1.9mm L = 9mm Pack of 10 replacement French clock bushes with hole size of 0.70mm.
F0389 FRENCH CLOCK BUSHES With shafts. 100 pcs per pack, assorted. Individual sizes also available in packets of 10.
0389 000115 FRENCH CLOCK BUSHES .12 - .30mm Assortment of 100 French clock bushes ranging from 0.12 to 0.30mm. All bushes in pack measure O/D 1mm L = 6mm. Includes the following hole sizes: 0.12, 0.14, 0.16, 0.18, 0.20, 0.22, 0.24, 0.26, 0.28, 0.30.
0389 000215 FRENCH CLOCK BUSHES ASSORTMENT .36 to .55mm 100 bushes from 0.36 to 0.55mm. Hole sizes: (O/D x L mm in brackets): 0.36 (1.4x7) 0.38 (1.4x7), 0.40 (1.4x7), 0.42 (1.4x7), 0.44 (1.4x7), 0.46 (1.7x7.5), 0.48 (1.7x8.5), 0.50 (1.7x9), 0.52 (1.7x9), 0.55 (1.8x9)
0389 000315 FRENCH CLOCK BUSHES ASSORTMENT .46 to .70mm 100 French clock bushes. Hole sizes: (O/D x L mm in brackets):0.46 (1.7x7.5), 0.48 (1.7x8.5), 0.50 (1.7x9), 0.52 (1.7x9), 0.55 (1.8x9), 0.58 (1.9x9), 0.61 (1.9x9), 0.64 (1.9x9), 0.67 (1.9x9), 0.70 (1.9x9)
F0558 BUSHING WIRE ASSORTMENT
0558 005015 BUSHING WIRE ASSORTMENT 45 pcs., 80mm long. Inside diameters 0.3 - 1.75mm, with outside diameters from 0.8 - 5mm.
0558 008015 BUSHING WIRE x 2pcs 0.80mm O/D 0.20mm I/D
0558 010015 BUSHING WIRE x 2pcs 1.00mm O/D 0.25mm I/D
0558 012515 BUSHING WIRE x 2pcs 1.25mm O/D 0.30mm I/D
0558 015015 BUSHING WIRE x 2pcs 1.50mm O/D 0.30mm I/D
0558 017515 BUSHING WIRE x 2pcs 1.75mm O/D 0.50mm I/D
0558 020015 BUSHING WIRE x 2pcs 2.00mm O/D 0.55mm I/D
0558 025015 BUSHING WIRE x 2pcs 2.50mm O/D 0.65mm I/D
0558 030015 BUSHING WIRE x 2pcs 3.00mm O/D 1.00mm I/D
0558 035015 BUSHING WIRE x 2pcs 3.50mm O/D 1.05mm I/D
0558 040015 BUSHING WIRE x 2pcs 4.00mm O/D 1.50mm I/D
0558 045015 BUSHING WIRE x 2pcs 4.50mm O/D 1.50mm I/D
0558 050015 BUSHING WIRE x 2pcs 5.00mm O/D 1.75mm I/D
F0392 BARREL BUSHES 4mm long tapered bushes for thick plates. Wide end is 0.10mm more than diameter given. A=inset width, B=hole diameter, C=full width, D=depth, E=lip width
0392 003015 BARREL BUSH ASSORTMENT Brass barrel bushes, 5 of each size, 7-12mm.
0392 000715 BARREL BUSHES, 5 OF SIZE 7mm Brass. A=7mm, B=4mm, C=9.5mm, D=5.7mm, E=1.5
0392 000815 BARREL BUSHES, 5 OF SIZE 8mm Brass. A=8mm, B=5mm, C=9.5mm, D=6.5mm, E=1.5
0392 000915 BARREL BUSHES, 5 OF SIZE 9mm Brass. A=9mm, B=6mm, C=12.5mm, D=5.5mm, E=1.5
0392 001015 BARREL BUSHES, 5 OF SIZE 10mm Brass. A=10mm, B=7mm, C=12.7mm, D=6.5mm, E=1.5
0392 001115 BARREL BUSHES, 5 OF SIZE 11mm Brass. A=11mm, B=9mm, C=12.7mm, D=5.8mm, E=1.5
0392 001215 BARREL BUSHES, 5 OF SIZE 12mm Brass. A=12mm, B=9.5mm, C=14mm, D=5.6mm, E=1.5
F0391 BUSHES FOR ENGLISH CLOCKS 4mm long tapered bushes for thick plates. Packs of 10.
0391 006015 BUSHES FOR ENGLISH CLOCKS Pack of 10 of each of the six sizes.
0391 000115 BUSHES FOR ENGLISH CLOCKS NO. 1 Internal diameter: 0.8mm External diameter: 2.1mm
0391 000215 BUSHES FOR ENGLISH CLOCKS NO. 2 Internal diameter: 0.9 External diameter: 2.5
0391 000315 BUSHES FOR ENGLISH CLOCKS NO. 3 Internal diameter: 0.9 External diameter: 2.9
0391 000415 BUSHES FOR ENGLISH CLOCKS NO. 4 Internal diameter: 1.0 External diameter: 3.3
0391 000515 BUSHES FOR ENGLISH CLOCKS NO. 5 Internal diameter: 1.1 External diameter: 3.7
0391 000615 BUSHES FOR ENGLISH CLOCKS NO. 6 Internal diameter: 1.1 External diameter: 4.1
F0390 AMERICAN CLOCK BUSHES
0390 000115 AMERICAN CLOCK BUSHES 100 assorted hard brass bushes, particularly suitable for American clocks. 20 different sizes.
F0460 SPLIT WASHER ASSORTMENT 100 pcs for mass-produced clocks.
0460 005015 SPLIT WASHER ASSORTMENT 100 pcs. for mass-produced clocks.
F0642 FIXING PINS FOR BEZELS AND DIALS
0642 010007 FIXING PINS FOR BEZELS AND DIALS: 7mm 100 Small brass pins. 7mm long. 1mm diameter (approx)
0642 010015 FIXING PINS FOR BEZELS AND DIALS: 10mm 100 Small brass pins. 10mm long. 1mm diameter (approx)
F0930 SELF ADHESIVE BAIZE
0930 332005 SELF ADHESIVE GREEN BAIZE Eliminate the risk of scratching highly polished surfaces with clock feet or woodwork by covering with this hard wearing baize. Sheets 500 x 200mm
F0527 MEDMAW PAINTED DIAL RESTORER
0527 012015 MEDMAW PAINTED DIAL RESTORER Ideal for painted longcase dials, this cleans and protects the surface. 120g.
F0629 DIAL REPAIR KIT
0629 000115 DIAL REPAIR KIT Ideal for French clocks or any porcelain & enamel dials. Kit contains powdered clay, resin, mixer sticks, pigments, numeral ink, pen, glaze, brush & full instructions on how to restore a cracked or damaged dial.
F0353 DIAL SILVERING For silvering brass, these easy to use materials come with full instructions.
0352 012015 SILVERING POWDER FOR DIALS, 120g
0352 030015 SILVERING POWDER FOR DIALS 250g
0353 012015 FINISHING POWDER FOR DIALS, 100g
0354 003015 STICK OF ENGRAVER'S SHELLAC BLACK WAX Contains high proportion of shellac. See kit for instructions
0424 000115 DIAL SILVERING KIT Kit containing 100g. powders, lacquer, synthetic wax, etc. Note: This kit cannot be posted abroad unless we discard the lacquer.
0602 012515 COLD METAL LACQUER -SILVER For dial silvering. 100ml.
F0461 LUMINOUS COMPOUND
0461 000215 LUMINOUS COMPOUND, 2g / 15ml. Non-radioactive luminous paste for alarm clocks. Blue/green. Pack contains two tubes to be mixed in equal parts.
F0618 PIVOT STEEL High quality blued steel to EN 4454 standard in packs of 10. Made to Stubbs wire gauge. The tolerance is +/- 0.02mm for blue wires. Size is the metric equivalent. Length 114mm.
0618 008015 PIVOT STEEL; 0.33mm. 10pcs (NO.80)
0618 007615 PIVOT STEEL; 0.45mm. 10pcs (NO.76)
0618 000615 PIVOT STEEL; 0.60mm. 10pcs
0618 007215 PIVOT STEEL; 0.61mm. 10pcs (NO.72)
0618 007015 PIVOT STEEL; 0.68mm. 10pcs (NO.70)
0618 000715 PIVOT STEEL; 0.70mm. 10pcs
0618 006715 PIVOT STEEL; 0.79mm. 10pcs (NO.67)
0618 000815 PIVOT STEEL; 0.80mm. 10pcs
0618 006615 PIVOT STEEL; 0.81mm. 10pcs (NO.66)
0618 006315 PIVOT STEEL; 0.90mm. 10pcs (NO.63)
0618 006015 PIVOT STEEL; 1.00mm. 10pcs (NO.60)
0618 005815 PIVOT STEEL; 1.03mm. 10pcs (NO.58) For music boxes.
0618 005615 PIVOT STEEL; 1.14mm. 10pcs (NO.56)
0618 013015 PIVOT STEEL; 1.30mm. 10pcs
0618 005215 PIVOT STEEL; 1.60mm. 10pcs (NO.52)
0618 017015 PIVOT STEEL; 1.70mm. 10pcs
0618 005015 PIVOT STEEL; 1.75mm. 10pcs (NO.50)
0618 018015 PIVOT STEEL; 1.80mm. 10pcs
0618 018515 PIVOT STEEL; 1.85mm. 10pcs
0618 004815 PIVOT STEEL; 1.90mm. 10pcs (NO.48)
0618 004715 PIVOT STEEL; 1.95mm. 10pcs (NO.47)
0618 020015 PIVOT STEEL; 2.00mm. 10pcs
0618 004315 PIVOT STEEL; 2.23mm. 10pcs (NO.43)
0618 023015 PIVOT STEEL; 2.30mm. 10pcs
0618 004015 PIVOT STEEL; 2.46mm. 10pcs (NO.40)
0618 025015 PIVOT STEEL; 2.50mm. 10pcs
0618 003815 PIVOT STEEL; 2.56mm. 10pcs
0618 026015 PIVOT STEEL; 2.60mm. 10pcs
0618 003615 PIVOT STEEL; 2.69mm. 10pcs (NO.36)
0618 027015 PIVOT STEEL; 2.70mm. 10pcs
0618 003215 PIVOT STEEL; 2.92mm. 10pcs (NO.32)
0618 030015 PIVOT STEEL; 3.00mm. 10pcs
0618 031015 PIVOT STEEL; 3.10mm. 10pcs
0618 003015 PIVOT STEEL; 3.22mm. 10pcs (NO.30)
0618 033015 PIVOT STEEL; 3.30mm. 10pcs
0618 034015 PIVOT STEEL; 3.40mm. 10pcs
0618 035015 PIVOT STEEL; 3.50mm. 10pcs
0618 040015 PIVOT STEEL; 4.00mm. 10pcs
0618 043015 PIVOT STEEL; 4.30mm. 10pcs
0618 045015 PIVOT STEEL; 4.50mm. 10pcs
0618 046015 PIVOT STEEL; 4.60mm. 10pcs
0618 050015 PIVOT STEEL; 5.00mm. 10pcs
0618 014415 PIVOT STEEL ASSORTMENT, 120 pcs
F0992 DIAMANTINE POWDER One of the original polishing compounds for steel and a favourite of many customers. Sold in 10g vials.
0992 000115 DIAMANTINE POWDER, MEDIUM
0992 000215 DIAMANTINE POWDER, FINE
0992 000315 DIAMANTINE POWDER, COARSE GRAIN
F1031 CROCUS BLOCK
1031 078015 CROCUS BLOCK 780g block of Crocus composition for polishing.
F0396 PEGWOOD BUNDLE In bundles, for cleaning or 'pegging out' pivot holes.
0396 002015 PEGWOOD BUNDLE, 2mm
0396 003015 PEGWOOD BUNDLE, 3mm
0396 004015 PEGWOOD BUNDLE, 4mm
0396 005015 PEGWOOD BUNDLE, 5mm
0396 006015 PEGWOOD BUNDLE, 6mm
0396 000115 PEGWOOD BUNDLE ASSORTED, 20pcs.
F0582 EMERY STICKS
0582 001215 EMERY STICKS 12 wood sticks with bonded emery, in assorted shapes.
0582 000215 EMERY STICK ASSORTMENT: 8 pieces This is a selection of rectangular emery sticks.
F0580 WATER OF AYR STONE
0580 001415 WATER OF AYR STONE Also known as Tam O' Shanter hones, these sticks are excellent for removing scratches. 1/4inch x 4inch. Size may vary.
F0482 POLISHING PAPER
0482 000115 CROCUS GRADE PAPER. Fine metal polishing paper like the old crocus. Per sheet. 14cm x 23cm approx.
F0583 WET OR DRY PAPER Sold by the sheet. 28cm x 23 cm approx.
0583 028015 WET OR DRY PAPER 280 GRIT
0583 036015 WET OR DRY PAPER 360 GRIT
0583 040015 WET OR DRY PAPER 400 GRIT
0583 060015 WET OR DRY PAPER 600 GRIT
0583 080015 WET OR DRY PAPER 800 GRIT
0583 120015 WET OR DRY PAPER 1200 GRIT
F0581 TRIPOLI POLISHING COMPOUND
0581 050015 TRIPOLI POLISHING COMPOUND, 730g blocks.
F0365 ROUGE POWDER
0365 000415 ROUGE POWDER For polishing non ferrous metals to a deep colour, and removing scratches from glass. 4oz. containers.
F1305 CLOCKSHINE A Carnauba Wax based protective polish that shines brass and provides a hard protective coating that inhibits tarnish. Used in place of traditional lacquers. Ideal for carriage and 400 day clocks and all household brassware.
1305 005015 CLOCKSHINE 50ml This 50ml bottle should be enough for at least 5 large clocks.
1305 010015 CLOCKSHINE 100ml This 100ml bottle should be enough for at least 10 large clocks.
F0434 M & P's BRASS & COPPER POLISH
0434 020015 M&P's BRASS & COPPER POLISH Contains a tarnish inhibitor. 125ml.
F0423 IMPREGNATED CLEANING CLOTH A quality cloth impregnated with a specialised cleaner.
0423 000115 IMPREGNATED BRASS CLEANING CLOTH
0423 000215 IMPREGNATED SILVER CLEANING CLOTH
0423 000415 IMPREGNATED JEWELLERY CLEANING CLOTH
F0942 GARRYFLEX BLOCKS Excellent for cleaning up metals like steel and cast iron. E.g., Useful for cleaning clock hands, removing light rust and restoring to a bright finish. Can be used wet or dry. Available in Fine, Medium and Coarse.
0942 006015 GARRYFLEX BLOCK COARSE (60) Blue
0942 012015 GARRYFLEX BLOCK MEDIUM (120) Grey
0942 024015 GARRYFLEX BLOCK FINE (240) Brown
F1601 FINISHING WHEELS
1601 105015 FINISHING WHEEL, FINE Finishing and buffing a wide variety of materials such as steel, cast iron, stainless steel high alloys and aluminium and non ferrous. Nylon wheel: 100mm x 50mm, Shaft: 40mm x 6mm.
1601 105013 FINISHING WHEEL, MEDIUM For finishing and buffing a wide variety of materials such as steel, cast iron, stainless steel high alloys and aluminium and non ferrous. Nylon wheel: 100mm x 50mm, Shaft: 40mm x 6mm.
1601 105003 FINISHING WHEEL, COARSE For finishing and buffing a wide variety of materials such as steel, cast iron, stainless steel high alloys and aluminium and non ferrous. Nylon wheel: 100mm x 50mm, Shaft: 40mm x 6mm.
1601 010506 FINISHING WHEEL. INTER-LEAVED FINE Ideal for finishing & buffing a wide variety of materials such as steel, aluminium and non ferrous. Interleaving offers a high cut rate combined with a uniform scratch pattern. Nylon wheel 100mm x 50mm, Shaft 40mm x 6mm.
1601 010513 FINISHING WHEEL: INTER-LEAVED MEDIUM Ideal for finishing and buffing a wide variety of materials such as steel, aluminium & non ferrous. Interleaving offers a high cut rate combined with a uniform scratch pattern. Nylon wheel: 100mm x 50mm, Shaft: 40mm x 6mm.
1601 010503 FINISHING WHEEL. INTER-LEAVED COARSE Ideal for finishing & buffing a wide variety of materials such as steel, aluminium and non ferrous. Interleaving offers a high cut rate combined with a uniform scratch pattern. Nylon wheel 100mm x 50mm, Shaft 40mm x 6mm.
F0932 RODICO STICK CLEANER
0932 000115 RODICO STICK CLEANER 80 x 20 x 15mm A special watch & clockmakers product for dry cleaning pivots, removing finger marks and stains from plates, dials and hands etc. Uses in engineering, electronics etc.
F0425 ROUGEZ JEWELLERY CLEANING KIT
0425 000115 ROUGEZ JEWELLERY CLEANING KIT For gold and platinum jewellery with or without precious stones, this kit will keep them in sparkling condition.
F0604 M&P's HOROGLIDE, MAINSPRING GREASE, etc.
1629 001515 HOROGLIDE: A revolutionary new lubricant from HOROSYN 15ml An oil-based grease that coats the spring's surfaces with a slippery coating that helps them glide over each other without sticking, being squeezed out or drying. Easy-to-dispense, 15ml syringe.
1629 005015 HOROGLIDE: A revolutionary new lubricant from Horosyn. 50ml. An oil-based grease that coats the spring's surfaces with a slippery coating that helps them glide over each other without sticking, being squeezed out or drying. Easy-to-dispense, 50ml syringe.
1629 008015 HOROGLIDE: A revolutionary new lubricant from Horosyn. 80ml An oil-based grease that coats the spring's surfaces with a slippery coating that helps them glide over each other without sticking, being squeezed out or drying. Easy-to-dispense, 80ml syringe.
0604 012015 MAINSPRING GREASE, 100ml High pressure grease that will not 'squeeze out'.
1627 010015 GRAPHITE GREASE, 100ml A premium quality graphite grease, with a high degree of water resistance and corrosion protection, particularly under the pressure of tightly wound springs.
F0329 CLOCK OILS
0657 000115 MEDMAW'S WATCH OIL Synthetic oil for watches and fine instruments.
0329 012515 HOROSYN CLOCK OIL 100ml M&P's own brand clock oils are non mineral refined. Clock oil is for use on pivot diameters of 0.2mm - 6mm.
0330 012515 HOROSYN TURRET CLOCK OIL 100ml Horosyn brand clock oils are non mineral refined. Turret clock oil is for use on pivot diameters over 6mm. For smaller pivots use our watch or clock oils.
0453 803015 MOEBIUS SMALL CLOCK OIL 20ml Natural. Viscosity: 1.15. Type: Classic 8030 Green cap.
0453 804015 MOEBIUS LARGE CLOCK OIL 20ml Natural. Viscosity: 1.45. Type: Classic 8040 Yellow cap.
F0603 WATCH OIL Finest quality Swiss oil.
0603 000115 MOEBIUS WATCH OIL 1ml x 4 Natural. Viscosity: 0.95. Type: Classic 8000
1079 000115 MOEBIUS HIGH PRESSURE OIL 20ml Natural. Type: Microgliss D3.
1079 000215 MOEBIUS EXTRA HIGH PRESSURE OIL 20ml Natural. Type: Microgliss D5.
1079 000315 MOEBIUS OIL 20ml Natural. Type: Microgliss D2
1402 000215 MOEBIUS ESCAPEMENTS V.STABLE OIL 2ml Synthetic. Viscosity: 1.5. Type: Synt-a-lube 9010.
1402 000515 MOEBIUS ESCAPEMENT OIL 5ml. Synthetic. Viscosity: 1.5. Type: Synt-a-lube 9010.
1402 001015 MOEBIUS ESCAPEMENT OIL 10ml Synthetic. Viscosity 1.5 Synt-a-lube 9010.
1403 000215 MOEBIUS ESCAPEMENT OIL 2ml Synthetic. Viscosity: 0.98. Synt-a-lube 9014.
1403 000515 MOEBIUS ESCAPEMENT OIL 5ml Synthetic. Viscosity: 0.98. Synt-a-lube 9014.
1404 000215 MOEBIUS PALLET JEWEL OIL 2ml Synthetic. Type: Special 941.
1405 001015 MOEBIUS ESCAPEMENT GREASE 10ml Synthetic. Type: 9415.
F0617 HONING OIL
0617 000415 HONING OIL 4oz BOTTLE
0617 621215 ARKANSAS STONE Fitted in a wooden box, for sharpening tools.
F0579 BLUING SALTS
0579 030015 BLUING SALTS 100g of salts for bluing steel, such as hands, screws etc. Full instructions supplied.
F0360 PIVOT CAPS
0360 001215 PIVOT CAPS A simple method of replacing broken pivots without drilling. Not recommended for quality clocks. An assortment of 2 of each of 6 popular sizes.
F0622 SILVER SOLDER
0622 065015 SILVER SOLDER 650C, 10g Ready mixed solder and flux paste, making it easy to use with minimal wastage. Clean the parts to be joined, put a blob on one of them, hold together and heat until they fuse. 650 degree melting point.
F1421 COOL-PASTE
1421 010015 COOL-PASTE 100g TUBE Cool-Paste isolates gems, metal, glass, plastic and wood etc. from the heat of soldering etc.
F0701 BRASS SHEET 200mm square sheets of CuZn39Pb for making dials etc. Available in a range of thicknesses.
0701 000515 BRASS SHEET 0.5mm
0701 000815 BRASS SHEET 0.8mm
0701 001015 BRASS SHEET 1.0mm
0701 001515 BRASS SHEET 1.5mm
0701 002015 BRASS SHEET 2.0mm
0701 002515 BRASS SHEET 2.5mm
0701 003015 BRASS SHEET 3.0mm
F0502 COLD PATINATOR Cold bronzing fluid for copper based metals. Ages repairs to match surrounding metal. Neutralize with jade oil when the correct shade is reached. 500ml.
0502 050015 COLD PATINATOR BLACK
0503 050015 COLD PATINATOR BROWN
0504 050015 JADE OIL, 500ml - PROTECTIVE OIL, DISPLACES HUMIDITY AND RETARDS TARNISHING Jade oil displaces moisture from the surface of metals. The oil retards tarnishing by depositing a thin protective film on the surface of the metal.
F0355 COLD METAL LACQUERS 100ml. The purpose of these lacquers is to mellow polished brass when in wooden cases. The darker or deeper the wood, the darker the gold. Colours can be mixed to obtain the desired shade.
0355 012515 COLD METAL LACQUER; NATURAL, 100ml.
0356 012515 COLD METAL LACQUER; PALE GOLD, 100ml.
0357 012515 COLD METAL LACQUER; MEDIUM GOLD, 100ml.
0358 012515 COLD METAL LACQUER; DARK GOLD, 100ml.
0462 012515 COLD METAL LACQUER; BLUE STEEL, 100ml.
F0422 CLOCK & WATCH DEGREASER A volatile degreaser based on Perchloroethylene. Softens some plastics. Excellent for all degreasing jobs and for removing traces of brass polish prior to lacquering. Used widely by watch repairers as a cleaner.
0422 012515 DEGREASER 125ml
0422 025015 DEGREASER 250ml
0422 050015 DEGREASER 500ml
F1609 BERGEON CLEANING SOLUTIONS
1609 006015 BERGEON ONE DIP SOLUTION Hairspring and jewel cleaner. Removes dirt and gum but does not dissolve shellac. Non-Flammable.
1623 005015 BERGEON VISSIN SOLUTION FOR SCREW EXTRACTION Bergeon's bespoke vissin fluid designed specifically for exctracting troublesome and broken screws. Simple and rapid, replaces all mechanical processes. Bergeon 4503-0050 - 50gms bottle.
F0415 RUST REMOVER
0415 012015 RUST REMOVER 125ml A mixture containing corrosive chemicals, it will remove rust by soaking.
F1158 CHAMOIS LEATHER
1158 091015 CHAMOIS LEATHER 8 x 9inch approx Genuine soft leather.
F0483 FRENCH CHALK BLOCK
0483 000115 FRENCH CHALK BLOCK Blocks of French brushing chalk that will bring a deep shine to brass. 50g block.
F1304 M+P's HOROGRENE CLOCK CLEANING KIT Environmentally friendly 3 stage clock cleaning fluid, designed to remove grease, lacquer and tarnish without the use of toxic chemicals. No strong smell
1304 012515 M+P's HOROGRENE CLEANING KIT 100ml Kit contains 100ml of each of the three cleaning products, disposable gloves and full instructions. Enough for several clocks.
1304 050015 M+P's HOROGRENE CLEANING KIT 500ml Kit contains 500ml of each of the three cleaning products, disposable gloves and full instructions.
F1303 CLOCKMAKERS TARNISH REMOVER Removes tarnish from Brass and Copper very rapidly. Ideal for very tarnished case parts, feet, etc. Contains Phosphoric acid.
1303 012515 CLOCKMAKERS TARNISH REMOVER 125ML
F0364 HOROLENE CLOCK CLEANING CONCENTRATE Water based Horolene concentrate (use 7:1) will remove tarnish from brass just by soaking. Cannot be shipped outside UK mainland.
0364 000115 HOROLENE CLOCK CLEANING CONCENTRATE 1 litre
0364 002515 HOROLENE CLOCK CLEANING CONCENTRATE 2.5 litre
0364 000515 HOROLENE CLOCK CLEANING CONCENTRATE 5 litre
0364 025015 HOROLENE 250ml Water based concentrate (use 7:1) will remove tarnish from brass just by soaking.
F1312 M+P's ULTRAGRENE CLEANER & RINSE
1312 002515 M+P'S ULTRAGREEN CLEANER 2.5l A non-flammable, non toxic clock and instrument cleaner, with no ammonia or strong fumes. Waterless. Ideal for ultrasonic cleaning, but can be used by immersion and brushing. AVAILABLE FROM SUMMER 2011.
1313 002515 M+P'S ULTRAGREEN RINSE A non-flammable waterless clock and instrument rinse. No strong fumes. There is no such thing as a non-toxic, non flammable, waterless, environmentally 'Green' rinse, but this is as close as you can get. Contains perchloroethane. AVAILABLE FROM SUMMER 2011.
1313 002515 A non-flammable waterless clock and instrument rinse. No strong fumes. There is no such thing as a non-toxic, non flammable, waterless, environmentally 'Green' rinse, but this is as close as you can get. Contains perchloroethane.
F0695 HOROTECH Spirit based Horotech is used neat, normally in ultrasonic tanks. Lube is a rinse with lubricant added. Cannot be shipped outside UK mainland.
0695 000515 HOROTECH CLEANER 5 litre Horotech Cleaner is used neat, normally in ultrasonic tanks. It is folled by using the rinse. Lube is a rinse with added lubricant.
0695 002515 HOROTECH CLEANER 2.5 litre Horotech Cleaner is used neat, normally in ultrasonic tanks. It is followed by using the rinse. Lube is a rinse with added lubricant.
0696 000515 HOROTECH RINSE 5 litre Horotech Rinse is used neat, normally in ultrasonic tanks. It is folled by using the rinse. Lube is a rinse with added lubricant.
0696 002515 HOROTECH RINSE 2.5 litre
0758 000515 HOROTECH LUBRICATING RINSE 5 litre Horotech Lube is used neat, normally in ultrasonic tanks. It is followed by using the rinse. Lube is a rinse with added lubricant.
0758 002515 HOROTECH RINSE/LUBE 2.5 litre
F0584 CLOCKMAKERS SAWDUST
0584 000115 CLOCKMAKERS SAWDUST 1 lb. (454g) of fine sawdust for spotless drying of parts.
F1040 SELVYT CLOTHS
1040 252515 SELVYT CLOTH 25 x 25cm
1040 353515 SELVYT CLOTH 35 x 35cm
1040 525015 SELVYT CLOTH 52 x 50cm
1040 000115 SELVYT CLOTH SMALL MITTENS
1040 000215 SELVYT CLOTH LARGE MITTENS
F0940 CAST BRASS CARRIAGE CLOCK KEY
0940 035018 CAST BRASS CARRIAGE CLOCK KEY 3.50mm Antique pattern. Small end 1.75-2.00 taper.
0940 037518 CAST BRASS CARRIAGE CLOCK KEY 3.75mm Antique pattern. Small end 1.75-2.00 taper.
0940 040018 CAST BRASS CARRIAGE CLOCK KEY 4.00M Antique pattern. Small end 1.75-2.00 taper.
0940 030018 CAST BRASS CARRIAGE CLOCK KEY 3.00mm Antique pattern. Small end 1.75-2.00 taper.
0940 032518 CAST BRASS CARRIAGE CLOCK KEY 3.25mm Antique pattern. Small end 1.75-2.00 taper.
F0915 COLD CASTING
0915 050018 COLD CASTING BRASS DUST 500g brass dust.
0916 025015 LATEX FOR MOULDS Latex 300g.
0917 025015 COLD CASTING RESIN & CATALYST Resin & catalyst 250ml.
F0221 BRASS CLOCK WASHERS ROUND HOLE
0221 014415 BRASS CLOCK WASHERS ROUND HOLE
F0495 VARNISH CLEAR
0495 024015 VARNISH CLEAR
F0791 ALUMINIUM HANDS
0791 026015 ALUMINIUM HANDS FOR PUBLIC CLOCKS 260MM