Clockmakers Supplies Index

Below you can find an index of most of the clockmakers supplies that we sell listed in this category. Click the links to find out more information about any product. This list has been created for your online convenience from chapter 3 of our Catalogue We more products, please view the list of Categories
M&P Home Page

The Striking Mechanism

LONGCASE BELL STAND & NUT
(Longcase bell stands, Bell stands)
LONGCASE BELL STAND & NUT 5" overall length. 3" steel shaft. Brass nut.

LONGCASE GATHERING PALLETS
Two types exist. The type is dependant on the rack design. Check if the pin on the rack that the pallet locks onto is on the FRONT or REAR of the rack. (Gathering pallets)
LONGCASE GATHERING PALLET, FRONT The tail of the front (left) pallet locks in front of the rack.
LONGCASE GATHERING PALLET, REAR The tail of the rear (right) pallet locks to the rear of the rack.

LONGCASE BELL HAMMER
(Bell hammers)
LONGCASE BELL HAMMER Steel. 85mm from hole to centre of hammer head.

LONGCASE RACK PARTS
(Longcase racks)
LONGCASE RACK SPRING
LONGCASE RACK BLANK Steel
LONGCASE RACK COMPLETE A pre-cut and assembled rack that saves all the work involved with an ordinary rack blank. Made from 1mm thick steel with brass pipe and lever. Locking pin fitted. Distance from pipe centre to the tips of teeth is 60mm.

LONGCASE & FUSEE FLY BLANK
(Fly blanks)
LONGCASE & FUSEE FLY BLANK Brass, ready for finishing. 42mm x 29mm.
LONGCASE & FUSEE FLY BLANK Brass, ready for finishing. 38mm x 26mm.

LONGCASE BELL HAMMER SPRING
(Bell hammer spring)
LONGCASE BELL HAMMER SPRING Complete with screw.

FRENCH GONG HAMMER ASSEMBLY
(Gong hammers)
FRENCH GONG HAMMER ASSEMBLY Brass. Also suits most mass-produced German clocks. 60mm long.

FRENCH CLOCK BELL STAND & NUT
(Frech bell stand, Bell stands)
FRENCH CLOCK BELL STAND & NUT Brass

FRENCH CLOCK BELL NUT
(Bell nuts)
FRENCH CLOCK BELL NUT No thread. Ready for tapping.

FRENCH BELL HAMMER
(Bell hammers)
FRENCH BELL HAMMER All brass construction

CAST CLOCK BELL
High quality. Shotblast. (Bells, Cast bells)
CAST CLOCK BELL 3 1/2"
CAST CLOCK BELL 4 3/8"
CAST CLOCK BELL 5 1/2"

CAST CLOCK BELL
Polished and silver plated. For French clocks. (Bells, Cast bells)
CAST CLOCK BELL 1 1/2"
CAST CLOCK BELL 2"
CAST CLOCK BELL 2 1/2"

PRESSED BRASS BELLS
An economic alternative to cast bells. We try to obtain bells as described but from time to time the sizes may vary slightly. (Bells, Pressed bells)
PRESSED BRASS BELL 44mm
PRESSED BRASS BELL 60mm
PRESSED BRASS BELL 70mm An economic alternative to cast bells.
PRESSED BRASS BELL 85mm
PRESSED BRASS BELL 100mm
PRESSED STEEL BELL 125mm High dome for Comtoise etc. 125mm diameter. 47mm high.

CAST BELL FOR COMTOISE
High quality bells, cast from bell metal. Smooth but not polished, just like the originals. Superb sound. Height 45mm. (Bells, Comtoise bells, Morbier bells)
CAST BELL 120mm COMTOISE
CAST BELL 140mm COMTOISE

ECONOMY CAST CLOCK BELLS
Cast from brass, not bell metal. (Bells)
CAST CLOCK BELL 2" (50mm) diameter. Centre hole drilled. Height 14mm.
CAST CLOCK BELL 2 1/4" (55mm) diameter. Centre hole drilled. Height 18mm.
CAST CLOCK BELL 5" (125mm) diameter. Centre hole drilled. Height 40mm.

ALARM PARTS
(American alarms)
ALARM MECHANISM FOR AMERICAN CLOCKS An accurate copy of the original, supplied complete with hammer and dial centre piece. Alarm trip wire and bell are not included.
ALARM CENTREPIECE ONLY For American clocks.

CUCKOO CLOCK BELLOWS, SIDE OPENING
Sold in pairs. Box height is the box only and does not include the bellows. (Bellows, Cuckoo bellows)
CUCKOO CLOCK BELLOWS 65mm, SIDE OPENING Sold in pairs.
CUCKOO CLOCK BELLOWS 70mm, SIDE OPENING Sold in pairs.
CUCKOO CLOCK BELLOWS 80mm, SIDE OPENING Sold in pairs.
CUCKOO CLOCK BELLOWS 100mm, SIDE OPENING Sold in pairs.
CUCKOO CLOCK BELLOWS 120mm, SIDE OPENING Sold in pairs.
CUCKOO CLOCK BELLOWS 140mm, SIDE OPENING Sold in pairs.
CUCKOO CLOCK BELLOWS 150mm, SIDE OPENING Sold in pairs.
CUCKOO CLOCK BELLOWS 160mm, SIDE OPENING Sold in pairs.

CUCKOO CLOCK BELLOWS, HORIZONTAL OPENING
(Bellows, Cuckoo bellows)
CUCKOO CLOCK BELLOWS HORIZONTAL 65mm Sold in pairs. Box height is the box only and does not include the bellows.

CUCKOO CLOCK BELLOWS, QUAIL.
(Bellows, Cuckoo bellows, Quail bellows)
CUCKOO CLOCK BELLOWS, QUAIL 55mm. Sold singly. Rear opening.

CUCKOO CLOCK BELLOWS, REAR OPENING
Sold in pairs. Box height is the box only and does not include the bellows. (Bellows, Cuckoo bellows)
CUCKOO CLOCK BELLOWS 70mm, REAR OPENING Sold in pairs.
CUCKOO CLOCK BELLOWS 80mm, REAR OPENING Sold in pairs.
CUCKOO CLOCK BELLOWS 100mm, REAR OPENING Sold in pairs.
CUCKOO CLOCK BELLOWS 120mm, REAR OPENING Sold in pairs.
CUCKOO CLOCK BELLOWS 140mm, REAR OPENING Sold in pairs.
CUCKOO CLOCK BELLOWS 150mm, REAR OPENING Sold in pairs.
CUCKOO CLOCK BELLOWS 160mm, REAR OPENING Sold in pairs.

BELLOWS REPAIR KITS
(Bellows repair kit, Cuckoo bellows repair)
BELLOWS REPAIR KIT Contains bellows material, glue, spreader and full instructions. Sufficient for several clocks.
BELLOWS LEATHER Delicate leather for repairing original cuckoo bellows. Because it is a natural product and hard to cut so thinly, we cannot specify the skin size. It will be more than enough for several normal clocks. Ivory-grey colour.
SYNTHETIC BELLOWS MATERIAL Enough for several clocks.
CUCKOO BELLOW WIRES Assortment of 4 lifters, ring hooks, bellow, door, hinge & locking wires. 8 Door cramps.

SPRING ASSORTMENT 100 PIECES
(Springs, wire)
SPRING ASSORTMENT 100 PIECES Coiled wire springs.

SEMI-HARD BRASS WIRES
(Semi-hard brass wire)
SEMI-HARD BRASS WIRE For return springs on American movements and for retaining glass barometer wheel tubes in place. 3 metre length. 0.4mm.

GONG BASE & STAND
(Gong bases, Gongs)
SPIRAL GONG & STAND Base 100mm x 65mm. Gong 140mm diameter.
MINI GONG & FITTINGS FOR C/CLOCK
GONG BASE & STAND With 3 1/2" wire gong. 5 1/2" high.

CIRCULAR GONG AND BUSH
(Gongs, Round gongs)
CIRCULAR GONG AND BUSH 2 3/4" flat gong with integral mounting bush.

CIRCULAR GONG
Round wire (Round gongs)
CIRCULAR GONG 80mm Round wire gong.
CIRCULAR GONG 100mm Round wire gong.
CIRCULAR GONG 120mm Round wire gong.
CIRCULAR GONG 140mm Round wire gong.

GONG HAMMER HEADS
For French mass-produced mantel clocks. (Gong hammers)
GONG HAMMER HEADS Pack of 5, with plastic insert.

CAST IRON GONG BASES
Tuned set of gongs fitted to a cast base. For Westminster chimes. (Gong bases)
CAST IRON GONGS, 5 UNDERSLUNG Set of 5 underslung gongs. Longest 250mm
CAST IRON GONGS, 5 HAMMERBACK Set of 5 hammerback gongs. Longest 250mm.
CAST IRON GONGS, 8 VERTICAL Set of 8 vertical rods. Longest 450mm
CAST IRON GONGS, 8 VERTICAL Set of 8 vertical rods. Longest 680mm

CAST IRON GONG BASE
(Gongs, Gongs & bases)
CAST IRON GONG BASE For fixing to the backboard of American and German clocks. 2" x 2 1/2" x 3/4".

GONG RODS
(Gong rods)
GONG RODS, TUNED SET OF 4 Bronze. Longest rod 9"
GONG RODS, TUNED SET OF 5 Bronze. Longest rod 9"
GONG RODS, TUNED SET OF 8 Steel. Longest rod 27"
GONG ROD, LOOSE 14" 2.8mm. Bronze 14" long.
GONG ROD, LOOSE 26 1/2" 3.6mm Steel 26 1/2" long

LONGCASE STUDS
Turned from solid 6mm steel. Threaded with 3BA. All sizes have 22mm long usable shaft. (Longcase studs, Studs, Rack studs)
MINUTE WHEEL STUD Shaft diameter 2.4mm. Shoulder depth 2.4mm.
RACK HOOK & LIFTING PIECE STUD Shaft diameter 3.1mm. Shoulder depth 4.0mm.
RACK STUD Shaft diameter 3.1mm. Shoulder depth 4.8mm.