Clockmakers Supplies Index

Below you can find an index of most of the clockmakers supplies that we sell listed in this category. Click the links to find out more information about any product. This list has been created for your online convenience from chapter 4 of our Catalogue We more products, please view the list of Categories
M&P Home Page

Movements & Kits

STANDARD QUARTZ MOVEMENTS
Complete with fixing nut, hanger, washer etc. Takes standard I-shaft hands (5mm round hour & 2.8 x 3.5mm oval minute) Needs 10mm centre hole. Requires AA battery. (Movements, Quartz movements)
STANDARD QUARTZ MOVEMENT For general purpose use. Shaft length 12mm. Dial thickness 0.25-3.5mm.
STANDARD QUARTZ MOVEMENT For general purpose use. Shaft length 16mm. Dial thickness 3.5-7mm.
STANDARD QUARTZ MOVEMENT For general purpose use. Shaft length 21mm. Dial thickness 7-11mm.
STANDARD QUARTZ MOVEMENT For general purpose use. Shaft length 26mm. Maximum dial thickness 15mm.

HIGH TORQUE QUARTZ MOVEMENT
(Quartz movements, Movements)
HIGH TORQUE QUARTZ MOVEMENT For applications with longer than average hands, these have more strength than standard movements. AA battery required. Normal I-shift quartz hands fit the shafts.

CHIMING QUARTZ MOVEMENT
(Quartz movements, Movements)
CHIMING QUARTZ MOVEMENT Requires 2 x AA batteries, not supplied. Speaker can be mounted separately.

ACCESSORIES FOR QUARTZ MOVEMENTS
(Quartz movements)
RUBBER WASHERS FOR QUARTZ MOVEMENTS 25 extra rubber washers.
BLIND NUTS FOR QUARTZ MOVEMENTS 5 Blind I-shaft nuts for use when no second hand is used.

ANTI CLOCKWISE MOVEMENT
(Quartz movements, Movements, Anti-clockwise movements)
ANTI CLOCKWISE MOVEMENT For novelty clocks. Similar to a standard unit, but runs anti-clockwise. AA battery required. I-shaft.

PENDULUM DRIVE UNIT
(Pendulum drive unit, Movements)
PENDULUM DRIVE UNIT Fits on our standard quartz unit (not included), to turn it into a pendulum movement. The pendulum has no bearing on the timekeeping. AA battery required. Rod length 250mm. (320mm from hand shaft to bottom of bob) 55mm bob.

VIENNA MOVEMENT WEIGHT DRIVEN
(Vienna movements, Movements)
VIENNA MOVEMENT WEIGHT DRIVEN

VIENNA MOVEMENTS, SPRING DRIVEN
Striking on half hour & full hours, complete with 150mm dial, clock hands, grid pendulum with bob, 12cm spiral gong , mounting bracket and key. Depth incl. handshaft 90mm. With silencing lever. (Vienna movements, Movements)
SPRING WOUND VIENNA MOVEMENT B Pendulum length 25cm. Bob diameter 63mm. Pendulum swing 13cm.
SPRING WOUND VIENNA MOVEMENT D Pendulum length 37cm. Bob diameter 80mm. Pendulum swing 16.5cm.
VIENNA MOVEMENT 14 Day regulator movement, spring-driven with strike on wire gong at half and full hours. Complete set with diameter 150mm dial, clock hands, grid pendulum with bob, wire gong (12cm diameter), mounting bracket and winding key. With silencing lever. Pendulum length: 21.5cm. Bob Diameter: 63mm.

CUCKOO MOVEMENTS
Replacement units for cuckoo clocks. Complete with chains, weights, 240mm wooden pendulum, hand nut & washer. Half hour and full hour striking. Hands, Dial & Gong not included. (Cuckoo movement, Movements)
CUCKOO MOVEMENT 1 DAY 275g weights. Weight drop 1720mm. Width 75mm Height 83mm. Hand shaft to top of movement 42mm.
CUCKOO MOVEMENT 8 DAY 1500g weights. Weight drop 2570mm. Width 85mm. Height 93mm. Hand shaft to top of movement 42mm.

FRENCH CLOCK TRANSFORMATION KIT
(French clock kit, Transformation kit)
FRENCH CLOCK TRANSFORMATION KIT

8 DAY MOVEMENTS, SPRING DRIVEN
Time only. Suitable for dials up to 12mm thick. 8mm centre hole. Complete with polished brass pendulum and key. Pendulum length is from hand shaft to tip of rod. (Movements, Spring driven movements)
8 DAY MOVEMENT 135mm SPRING DRIVEN TYPE A 43mm Bob. Swing 90mm.
8 DAY MOVEMENT 270mm SPRING DRIVEN TYPE C 55mm Bob. Swing 120mm.

CARRIAGE CLOCK SECTIONS
(Carriage clock section)
CARRIAGE CLOCK DOOR SECTION 4 x 4mm. Length: 460mm.
CARRIAGE CLOCK CORNER SECTION Assemble your own carriage clock case or make a crystal regulator from an old French movement using these solid brass door and corner pillar sections. 11 x 10 x 10mm. Length: 460mm.
GLAZING GROOVE TOOL TUNGSTEN TIP

19TH CENTURY MORBIER MOVEMENT
Copy of a typical 19c Morbier movement with iron cage and 4 pillars. Supplied with cord and weight hooks. Strikes half and hours on a cast brass bell. Requires 4.2kg weight. Suitable wall bracket is part number 1085 000115. (Morbier movement, Movements, Comtoise movement)
19TH CENTURY MORBIER MOVEMENT ONLY A very good reproduction of the original movement.
MORBIER MOVEMENT COMPLETE WITH SIDE PANELS AND HANDS. A very good reproduction movement.

MUSICAL BOX MOVEMENTS
Approximately 52 x 44 x 21mm. Winder beneath the base. (Musical box movements)
MUSICAL BOX MOVEMENT 18 NOTE BLUE DANUBE
MUSIC BOX MOVEMENT 18 NOTE LARA'S THEME

AMERICAN REPRODUCTION MOVEMENTS
(American movements, Movements)
AMERICAN STYLE REPRODUCTION MOVEMENT
AMERICAN MOVEMENT Drop 13" T & S. 2" Shaft.

30 HOUR INSERTION MOVEMENTS
Suitable for hole depth of 32-45mm. (Insertion movements, Mechanical insertion movements, Drum movements)
30 HOUR INSERTION MOVEMENT 401 BRASS Bezel o/d 62mm. Hole o/d 55-60mm.
30 HOUR INSERTION MOVEMENT 402 BRASS Bezel o/d 65mm. Hole o/d 55-60mm.
30 HOUR INSERTION MOVEMENT 407 BRASS Bezel o/d 65mm. Hole o/d 55-60mm.
30 HOUR INSERTION MOVEMENT 408 BRASS Bezel o/d 65mm. Hole o/d 55-63mm.

QUARTZ INSERTION MOVEMENTS
Suitable for hole depth 30-45mm. (Insertion movements, Quartz insertion movements, Drum movements)
QUARTZ INSERTION MOVEMENT 401 BRASS Bezel o/d 62mm. Hole o/d 55-60mm.
QUARTZ INSERTION MOVEMENT 402 BRASS Bezel o/d 65mm. Hole o/d 55-60mm.
QUARTZ INSERTION MOVEMENT 407 BRASS Bezel o/d 65mm. Hole o/d 55-60mm.
QUARTZ INSERTION MOVEMENT 408 BRASS Bezel o/d 65mm. Hole o/d 55-63mm.
QUARTZ INSERTION MOVEMENT 434 BRASS Bezel o/d 72mm. Hole o/d 55-70mm.
QUARTZ INSERTION MOVEMENT 437 BRASS Bezel o/d 72mm. Hole o/d 55-70mm.
QUARTZ INSERTION MOVEMENT 447 BRASS Bezel o/d 85mm. Hole o/d 55-83mm.
QUARTZ INSERTION MOVEMENT 448 BRASS Bezel o/d 85mm. Hole o/d 55-83mm.
QUARTZ INSERTION MOVEMENT 467 BRASS Bezel o/d 100mm. Hole o/d 55-98mm.
QUARTZ INSERTION MOVEMENT 478 BRASS Bezel o/d 120mm. Hole o/d 55-118mm.
QUARTZ INSERTION MOVEMENT 487 BRASS Bezel o/d 150mm. Hole o/d 55-148mm.
QUARTZ INSERTION MOVEMENT 406 BRASS Bezel o/d 62mm. Hole o/d 55-60mm.

EXTENSION KITS TO INCREASE HOLE DEPTH

EXTENSION KIT FOR MECHANICAL INSERTION MOVEMENT For mechanical movements the kit contains assorted extensions for the fixing, the winder and the settler.
EXTENSION KIT FOR QUARTZ INSERTION MOVEMENT For quartz movements the kit contains extensions for the fixing and the setter.

MAINS SYNCHRONOUS MOVEMENT
(Electric movemets, Movements)
MAINS SYNCHRONOUS MOVEMENT 220v-240v 50Hz. 65mm x 30mm deep. Integral hanging bracket. Standard hand fittings:- 5mm & 2.80mm x 3.5mm. Second hand facility. Case to shaft tip 23mm.
SECOND HAND FOR SYNCHRONOUS MOVEMENT 130mm red.

MINIATURE PUBLIC CLOCK MOVEMENTS
(Exterior clocks, Public clock movements)
MINIATURE PUBLIC CLOCK MOVEMENT 240v 50hz. movement that can drive very light counter-balanced hands behind glass or other water-proof cover up to 800mm long.
MINIATURE PUBLIC CLOCK MOVEMENT 110v, 60 hz For USA etc.
MINIATURE PUBLIC CLOCK MOVEMENT 24v Hands can be exposed to the weather provided easy access is possible and our collets are used.
MINIATURE PUBLIC CLOCK COLLETS Special hand collets with screw fixing
MINIATURE PUBLIC CLOCK TRANSFORMER 240-24v 240v/24v transformer. One per movement is needed.

PUBLIC CLOCK MOVEMENTS
(Public clock movements)
STANDARD PUBLIC CLOCK MOVEMENT
EXTERIOR MOVEMENT INTERMEDIATE For use on dials upto 3 foot. Can be supplied with optional extension drive, to 34" in length.
HEAVY DUTY 240v UNIT SYNCHRONOUS
EXTRA HEAVY DUTY 240v UNIT SYNCHRONOUS
EXTENSION DRIVE FOR EXTERIOR MOVEMENT

FIXING KIT FOR EXTENSION DRIVE
(Exterior clocks)
FIXING KIT FOR EXTN. DRIVE This may be required when the precise wall thickness cannot be determined. It allows extra support for the extension drive shaft should it be too long.

PUBLIC CLOCK RESYNCHRONISER
(Re-synchronisers)
PUBLIC CLOCK RE-SYNCHRONISER

ROTARY PENDULUM DRIVES
(Rotary drive, Movements, Anti-clockwise movements, 400 day drive)
ROTARY PENDULUM DRIVE 52 x 60mm
ROTARY PENDULUM DRIVE 70 x 94mm

TIME & TIDE MOVEMENT QUARTZ
(Tide movement, Movements)
TIME & TIDE MOVEMENT QUARTZ A four-handed movement, with the conventional hour, minute & second shafts plus a tide shaft. This is geared to lunar time, which is the most important factor controlling MOST tidal areas. NB Coasts west of large land masses (eg California) have complex tides.

TIDE CLOCK
(Tide clock)
TIDE CLOCK Whether you're ..... Launching a Boat - Going Fishing - Collecting Bait - Beach Combing or just Watching the Waves... A Tidal Indicator is a must.

MULTI-EVENT TIMER WHITE
(Timer, Medication reminder)
MULTI-EVENT TIMER Pocket size. Colour: White. 31 possible alarms a day, from 8am -11pm. Easy to use. High pitched yet unobtrusive alarm. Can be used by the blind. Ideal as a medication reminder. Recommended by the Parkinson's Society. Uses 2 x 389 batteries (supplied).

BLACKSTONE ANTI-CLOCKWISE CLOCK
(Anti-clockwise clocks)
BLACKSTONE ANTI- CLOCKWISE CLOCK

24 HOUR MOVEMENTS
(24 Hour movements, Movements)
24 HOUR QUARTZ MOVEMENT Quartz, with 24 hour motion work suitable for dials numbered 1 - 24.

MOVEMENT AG
(Movement AG, 1 Day weight driven movement)
1-DAY WEIGHT DRIVEN MOVEMENT Movement without strike or chime, fitted in a wooden box. Complete with chain, wire pendulum, cast weight (250g), and clock hands (28/23mm). Pendulum length: 23cm. Centre hole diameter: 6mm min. Dial thickness: Upto 12mm.

ELECTRONIC CUCKOO MOVEMENT
Complete quartz movement with speaker unit, bird with opening doors, dummy weight shells, hands and pendulum. Suitable case size 140 x 170 x 7.5mm. Hand shaft to pendulum tip 260mm. Requires 2 x D cells not supplied. (Cuckoo movements, Quartz cuckoo movements)
QUARTZ CUCKOO MOVEMENT Complete quartz movement with speaker unit, bird with opening doors, dummy weight shells, hands and pendulum. Suitable case size 140 x 170 x 7.5mm. Hand shaft to pendulum tip 260mm. Requires 2 x D cells not supplied.