Clockmakers Supplies Index

Below you can find an index of most of the clockmakers supplies that we sell listed in this category. Click the links to find out more information about any product. This list has been created for your online convenience from chapter 9 of our Catalogue We more products, please view the list of Categories
M&P Home Page

Case Ornamentation

BRASS HANDLES
For carriage and bracket clocks. The wires can be adjusted slightly to suit existing handle centres. (Handles)
BRASS HANDLE 54 x 36mm
BRASS HANDLE 62 x 25mm
BRASS HANDLE 88 x 35mm

BRASS ESCUTCHEONS
(Escutcheons)
LONGCASE BRASS ESCUTCHEON For longcase doors. 3 3/4" long, 1" wide. Solid brass.
OVAL BRASS ESCUCHEON 36 x 27mm.
FLAT BRASS ESCUTCHEON 25 x 10 x 1mm. Polished and lacquered flat brass escutcheon for small locks on brackets and grandmother clocks, musical boxes and jewellery cases.
FLAT BRASS ESCUTCHEON 40 x 20mm. Thickness: 1mm.

KEYHOLE INSERT
(Escutcheons)
KEYHOLE INSERT Solid brass insert. 10 x 18mm.

BRASS BOX CORNERS
Solid brass, suitable for musical boxes and writing slopes. (Box corners, Corners for boxes)
BRASS BOX CORNER 15mm Height 7mm.
BRASS BOX CORNER 25mm Height 11mm.
BRASS BOX CORNER 35mm Height 12mm.
BRASS BOX CORNER 45mm Height 14mm.
BRASS BOX CORNER 55mm Height 16mm.

LATCHES
(Latches)
BRASS LATCH FOR O.G. & STEEPLE CLOCKS Solid brass construction.
2 PIECE BEZEL LATCH Knob screwed to bezel fits into catch.
ROUND BRASS DOOR LATCH Suitable for almost any clock door.

MIRROR PLATE BRASS
(Mirror plates)
MIRROR PLATE BRASS Solid brass. 39mm width. 39mm height.

BRASS DOOR CATCHES
(Door catches)
BRASS DOOR CATCH For American & German clocks.

BRASS TURN
(Latches, Turns)
BRASS TURN For drop dial clock doors etc,

LONGCASE HOOD BLANK
(Hood blanks, Hinges)
LONGCASE HOOD BLANK Solid brass. Sold in pairs.

DOOR HOOKS
Left handed: The eye goes on the door, the latch fits the left of the case.
Right handed: The eye goes on the door, the latch fits the right of the case. (Door Hooks)
BRASS DOOR HOOK & EYE 3/4" LEFT HANDED
BRASS DOOR HOOK & EYE 1" LEFT HANDED
BRASS DOOR HOOK & EYE 3/4" RIGHT HANDED
BRASS DOOR HOOK & EYE 1" RIGHT HANDED

REPEAT KNOB
(Knobs, Repeat knobs)
REPEAT KNOB Typical bracket style, turned from solid brass. 15mm long, 10mm at the widest point. Recessed for knot.

CARRIAGE CLOCK DOOR KNOB
(Knobs)
CARRIAGE CLOCK DOOR KNOB Knurled brass knob with threaded stem. 6mm diameter head. 4mm deep.

BRASS KNOBS
(Knobs)
BRASS PENDANT KNOB 23mm DROP Integral woodscrew fixing.
BRASS PENDANT KNOB 32mm DROP
CAST BRASS PENDANT KNOB 36mm DROP Antique style.
CAST BRASS PENDANT KNOB 55mm DROP Antique style.
BRASS DOOR KNOB Gothic style.
BRASS PENDANT KNOB WITH BACKPLATE Length: 40mm, Width: 15mm, O/D of backplate: 26mm.
BRASS PENDANT KNOB WITH BACKPLATE Length: 42mm, Width: 14mm, O/D of backplate: 29mm.
BRASS PENDANT KNOB WITH BACKPLATE Length: 54mm, Width: 19mm, O/D of backplate: 32mm.
BRASS PULL WITH BACKPLATE Diameter of ring: 27mm, O/D of backplate: 23mm.
BRASS PULL WITH BACKPLATE Diameter of ring: 15mm, O/D of backplate: 26mm.

PRESSED HINGES
For Clock doors. Measured open. Sold individually. (Hinges)
PRESSED BRASS HINGE 5/8" high x 1/2" wide
PRESSED BRASS HINGE 3/4 x 1/2" Height 3/4", Width 1/2"

BUTT HINGES
Solid Brass. Unequal sides. Measured open. Sold individually. (Butt hinges)
BUTT HINGE 1 x 1 3/8" Height 1", Width 1 3/8"
BUTT HINGE 1 1/4" x 1 1/2" Height 1 1/4", Width 1 1/2"

BRASS HINGES WITH FINIALS
(Hinges)
HINGE BRASS WITH FINIALS 40 x 35mm Sold singly.
HINGE BRASS WITH FINIALS 50 x 40mm Sold singly.

SPIRE BALLS
Polished brass ornament complete with wood screw in base. Height excludes the screw. (Spire balls)
SPIRE BALL 75mm 28mm wide ball.
SPIRE BALL 115mm 48mm wide ball.

EAGLE BALLS
Polished brass ornament complete with wood screw in base. Height excludes the screw. (Eagle balls)
EAGLE BALL 75mm 28mm wide ball.
EAGLE BALL 115mm 48mm wide ball.

PILLAR CAPS
Polished brass capital. Max height 20mm. (Pillar caps)
PILLAR CAP 19 x 31mm Pillar diameter 19mm, Base width 31mm
PILLAR CAP 22 x 31mm Pillar diameter 22mm, Base width 31mm
PILLAR CAP 25 x 35mm Pillar diameter 25mm, Base width 35mm
PILLAR CAP 28 x 41mm Pillar diameter 28mm, Base width 41mm

CAST BRASS FINIALS
Height excludes screw. (Finials)
CAST BRASS FINIAL 25 x 12mm
CAST BRASS FINIAL 35 x 18mm
CAST BRASS FINIAL 45 x 20mm
CAST BRASS FINIAL 70 x 35mm

CAST BRASS ROSETTE
Suitable for pinning to wood. (Rosettes)
CAST BRASS ROSETTE 25mm
CAST BRASS ROSETTE 36mm

PRESSED BRASS ROSETTE
Complete with pin. Dimension is the diameter. (Rosettes)
PRESSED BRASS ROSETTE 14mm
PRESSED BRASS ROSETTE 17mm
PRESSED BRASS ROSETTE 20mm
PRESSED BRASS ROSETTE 30mm
PRESSED BRASS ROSETTE 50mm

PERFORATED BRASS SHEET
(Brass sheet, Perforated brass sheet)
PERFORATED BRASS SHEET Polished on one side. For fretwork in doors and sides of clock cases. 300 x 145mm sheets.

FABRIC FOR FRETWORK
12" x 6" pieces of synthetic backing silk. Goes well behind perforated brass sheet 0571 120615 (Fabric)
BURGUNDY FABRIC
DARK GREEN FABRIC

MOVEMENT STRAP
(Movement strap)
MOVEMENT STRAP For securing French movements to their cases. 150mm long. Includes a 4BA 2" screw. Sold individually.

LONGCASE SEATBOARD HOOK
Steel wire with brass nut. (Seatboard hooks)
SEATBOARD HOOK FOR L/C 1/8" 3.2mm
SEATBOARD HOOK FOR L/C 5/32" 4mm

AMERICAN METAL BACKPLATE
For clocks that imitated the French. (Backplates)
AMERICAN METAL BACKPLATE 3 3/4" 95MM. Star pressed into the metal along with two concentric circles.
AMERICAN METAL BACKPLATE 5 1/4"
AMERICAN METAL BACKPLATE 4 1/2"

REEDED BRASS TUBE
(Reeded tube, Brass tube, Tube)
REEDED BRASS TUBE Ready for polishing and lacquering, this brass tube is ideal as a replacement for any architectural style case needing new columns. 9 inches long. 3/4 inch diameter. 0.32" wall thickness

OFFICE DIAL CASE PEGS
(Case pegs)
OFFICE DIAL CASE PEG Turned beech. Tapers from 10mm at the shoulder to 6mm at the tip.

VIENNA STABILIZERS
(Vienna stabilizers, Stabilizers)
VIENNA STABILIZERS Sold in pairs, suitable for all sizes of Vienna clock.

VIENNA SCALES
(Vienna scales, Scales)
VIENNA SCALE 76 x 31mm Enamelled beat plaque
VIENNA SCALE 56 x 22mm Enamel
VIENNA SCALE 70 x 24mm Enamel
VIENNA SCALE 77 x 32mm Brass. Solid brass scale or beat plaque to show the swing of the pendulum. Numerals and scale are recessed for filling with engravers wax if required.

VIENNA REGULATOR EAGLES
(Eagles)
VIENNA REGULATOR EAGLE Dark resin. 110mm high x 180mm wide.
VIENNA REGULATOR EAGLE Dark resin. 145mm high x 180mm wide.

VIENNA REGULATOR HORSES
(Horses)
VIENNA REGULATOR HORSE Dark resin. 170mm high x 145mm wide.
VIENNA REGULATOR HORSE Dark resin. 210mm high x 210mm wide.

WOODEN ROSETTES
(Rosettes)
WOODEN ROSETTE 31 x 9mm Pressed.
WOODEN ROSETTE 43 x 12mm Pressed.
WOODEN ROSETTE 60 x 9mm Pressed.

VIENNA MOVEMENT FASTENERS
(Vienna fasteners, Fasteners)
VIENNA MOVEMENT FASTENERS 4mm steel screw with knurled head. Sold in pairs. Plates 54 x 15 x 2mm. Screws 30mm long excluding head. Nickel plated screws and plates.

UNFINISHED VIENNA REGULATOR CROWNS
(Vienna crowns, Crowns)
UNFINISHED VIENNA REGULATOR CROWN NO. 1 Ready to be stained/polished. Made of solid hand-carved walnut, ready for polishing. 300 x 87mm.
UNFINISHED VIENNA REGULATOR CROWN NO 3 Ready to be stained/polished. Walnut veneered, ready for assembly and finishing. 350 x 230mm.
UNFINISHED VIENNA REGULATOR CROWN NO 4 Ready to be stained/polished. Quality ply, ready for assembly and finishing. 370 x 268mm.
UNFINISHED VIENNA REGULATOR BOTTOM NO 2 Ready for sanding & polishing. Made from solid walnut and ready for polishing. 80mm high. 166 x 116mm at the top. 74 x 67mm at the bottom.
UNFINISHED VIENNA REGULATOR BOTTOM NO 11 Ready for sanding & polishing. Solid walnut exterior. Pre-sanded. Height 95mm. Top 195 x 120mm. Bottom 50 x 50mm.
VIENNA BOTTOM 105mm
CROWN FOR VIENNA/OAK 330 x 86mm Solid Oak. Ready for finishing.

HIGH QUALITY VIENNA CROWNS
Very high quality. Finished and ready for final waxing. (Vienna crowns, Crowns)
HIGH QUALITY VIENNA CROWN NO. 6 440 x 150mm
HIGH QUALITY VIENNA CROWN NO. 7 440 x 175mm
HIGH QUALITY VIENNA CROWN NO. 8 360 x 125mm
HIGH QUALITY VIENNA CROWN NO. 9 350 x 145mm
HIGH QUALITY VIENNA BOTTOM NO 10 Height 120mm. Top 240 x 120mm. Bottom 125 x 65mm.

CAST VIENNA MASK
(Vienna masks)
CAST VIENNA MASK Made from a compound that can be stained & varnished. 40 x 53 x 20mm

BUN FEET
Solid brass, polished. 12mm high. Countersunk hole to prevent fixing screw from scratching polished surfaces. (Feet, Bun feet)
BUN FOOT 15mm
BUN FOOT 19mm
BUN FOOT 25mm
BUN FOOT 31mm

BRACKET FOOT
(Feet)
BRACKET FOOT Plain polished brass.12mm high. Base sides 28mm long. Upper sides 40mm.

BRASS CADDY FOOT
Size given is the diameter. (Feet, Caddy feet)
BRASS CADDY FOOT 19mm Solid brass.
BRASS CADDY FOOT 13mm Solid brass.
BRASS CADDY FOOT 25mm Solid brass

AMERICAN CAST FEET
(Feet)
'AMERICAN' CAST FEET Cast from hard metal andready for spray gilding. suit American copies of French marble clocks. Sold in sets of four.

LONGCASE FEET
Set of four quality replacement feet for Longcase clocks. Front feet 90 x 90 x 65mm high. Rear feet allow the case to touch the wall, so are only 55 x 65 x 65mm high. Ready for polishing. (Feet)
SET OF 4 LONGCASE FEET SANDED MAHOGANY
SET OF 4 LONGCASE FEET SANDED OAK

FEET
(Feet)
BRASS KNOB OR FOOT NO 2 3/8" wide 3/8" high, excluding woodscrew.
BRASS FOOT OR KNOB NO. 3 1/2" wide 1/2" high, excluding woodscrew.
BRACKET FOOT ORNATE 42 x 29 x 12mm
BRACKET FOOT CLAW 35 X 15mm Brass.
BRACKET FOOT OGIVE 25 X 30 X 12mm

LIONS HEAD HANDLES
Not suitable for carrying the clock with! Sold in pairs. (Handles, Lions head handles)
LIONS HEAD HANDLES Cast from hard metal and spray gilded. 2" x 2 1/4" excluding ring.
LIONS HEAD HANDLE + RING 42 x 35mm Sold singly. Cast brass. High quality.
LIONS HEAD HANDLE + RING 50 x 45mm Sold singly. Cast brass. High quality.
LIONS HEAD HANDLE + RING 55 x 65mm Sold singly. Cast brass. High quality.

EARS FOR DROP DIAL CLOCKS
(Ears, American ears)
EARS FOR DROP DIAL CLOCKS Hand carved from hardwood, ready for finishing. Suits most drop dial cases. 60 x 240mm at the widest points. Sold in pairs only.

WOODEN FINIALS
Made from turned beech. Other wooden finials can be supplied to special order. If you do not see what you want, please send a sketch and we will let you know what we can offer. (Finials, Wooden finials)
WOODEN FINIAL NO. 1. Height 23mm Width 10mm
WOODEN FINIAL NO. 2. Height 34mm Width 20mm
WOODEN FINIAL NO. 3. Height 44mm Width 21mm
WOODEN FINIAL NO. 4. Height 51mm Width 29mm
WOODEN FINIAL NO. 5. Height 61mm Width 24mm
WOODEN FINIAL NO. 6. Height 77mm Width 34mm
WOODEN FINIAL NO. 7. Height 83mm Width 50mm
WOODEN FINIAL NO. 8. Height 84mm Width 43mm
WOODEN FINIAL NO. 9. Height 98mm Width 38mm
WOODEN FINIAL NO. 10. Height 125mm Width 49mm
WOODEN FINIAL NO. 11. Height 80mm Width 45mm
WOODEN FINIAL NO. 12. Height 80mm Width 42mm
WOODEN FINIAL NO. 13. Height 59mm Width 32mm
WOODEN FINIAL NO. 14. Height 96mm Width 45mm
WOODEN FINIAL NO. 15. Height 66mm Width 44mm
WOODEN FINIAL NO. 17. Height 107mm Width 49mm
WOODEN FINIAL NO. 18. Height 53mm Width 45mm
WOODEN FINIAL NO. 19. Height 73mm Width 45mm
WOODEN FINIAL NO. 20. Height 84mm Width 45mm
WOODEN FINIAL NO. 21. Height 53mm Width 28mm
WOODEN FINIAL NO. 22. Height 77mm Width 38mm
WOODEN FINIAL NO. 23. Height 68mm Width 40mm
WOODEN FINIAL NO. 24. Height 67mm Width 43mm
WOODEN FINIAL NO. 25. Height 72mm Width 37mm
WOODEN FINIAL NO. 26. Height 67mm Width 34mm
WOODEN FINIAL NO. 27. Height 34mm Width 25mm

CUCKOO BIRDS
(Cuckoo birds, Birds)
CUCKOO BIRD, PLASTIC Plastic body with moving bill. Painted wings. 78mm long. Metal foot & clamp screw. Multi-coloured.
CUCKOO BIRD, WOODEN Wooden bird for cuckoo clocks. Coloured bill, but rest of bird needs painting to suit. Fixed wings. 20mm high, 87mm long.

CUCKOO CLOCK TOPS
Carved wooden top for cuckoo clocks. Unstained, but sanded and ready to fit. (Cuckoo tops)
CUCKOO CLOCK TOP 215mm wide x 130mm high.
CUCKOO CLOCK TOP 240mm wide x 155mm high.
CUCKOO CLOCK TOP 295mm wide x 185mm high.

GLASS RETAINING STRIPS
(Glass retainers, Retaining strips)
GLASS RETAINING STRIPS 12" strips of wood to hold glass in position on O.G's etc. 1/4" x 1/8". Packs of four strips.

MARBLE EFFECT PAPER
(Marble paper)
MARBLE EFFECT PAPER 10 A4 sheets of pattern number 1.
MARBLE EFFECT PAPER 10 A4 sheets of pattern number 2.
MARBLE EFFECT PAPER 10 A4 sheets of pattern number 3.
MARBLE EFFECT PAPER 10 A4 sheets of pattern number 4.
MARBLE EFFECT PAPER Pack of four different A4 sheets of marble effect paper for use on clocks and antiques that had areas of immitation marble. Simply glue in place and varnish if required.

WALL BRACKETS
(Wall Brackets, Brackets)
WALL BRACKET 230 x 200mm. Depth: 155mm. Ideal for Morbier & Comtoise clocks.

LOCKS
When described as handed, this refers to the throw of the lock. A left hand lock throws or shoots to the left when locked. (Locks)
CABINET LOCK & KEY LEFT HAND Solidly constructed brass lock & key for clock cases and small boxes. Mortice type. 52mm key. Face plate 8 x 46mm. Box 17 x 27 x 4mm.
BR.LOCK, ESCUTCHEON & KEY, RIGHT HAND
BRACKET CLOCK LOCK Solid brass lock & key for bracket clocks whose keyholes are on the side of the case. 1 1/2 x 3/4 x 3/8" Antique pattern forged key.
DOOR LOCK - CUT TYPE 1 1/2" LEFT HAND For doors that will not take a mortice lock. Brass construction with steel key. Left hand throws to the left.
DOOR LOCK - CUT TYPE 2" LEFT HAND For doors that will not take a mortice lock. Brass construction with steel key. Left hand throws to the left.
DOOR LOCK - CUT TYPE 2" RIGHT HAND For doors that will not take a mortice lock. Brass construction with steel key. Right hand throws to the right.
MINI LOCK & KEY Brass, complete with key and locking pin which fits into the door or lid to be secured. Body 25 x 4mm. Overall 40 x 5mm.
BRASS BOX LOCK, KEY & ESCUTCHION

DOOR KEYS BLANK PLAIN
Size is total metal length. (Key blanks)
DOOR KEY BLANK PLAIN 1" LONG
DOOR KEY BLANK PLAIN 1 1/4" LONG
DOOR KEY BLANK PLAIN 1 1/2" LONG

DOOR KEYS BLANK FANCY/STEEL
Size is total metal length. (Key blanks)
DOOR KEY BLANK FANCY 25mm
DOOR KEY BLANK STEEL 28mm
DOOR KEY BLANK FANCY 35mm
DOOR KEY BLANK FANCY 45mm
DOOR KEY BLANK FANCY 54mm
DOOR KEY BLANK FANCY 55mm
DOOR KEY BLANK FANCY 69mm