Copyright notice
The Book
    Introduction
    Which clock to begin on?
    Hand Removal
       Pin and Collet
       Hand nut
       Friction fitting
    Removing the dial
    Letting down mainsprings
    To strip or not to strip?
       Cleaning without stripping down
    Stripping down the movement
    Repairs
       Pivots
       Bushing:
          Choosing cutting broaches
       Re-facing the pallets
       Checking the crutch and yoke
       The Platform Escapement
          Ordering a replacement platform
          Fitting a new platform
       Broken and Missing Pieces
          Black Forest bobs
          Broken teeth
          Click springs
          Hands
             Hand retainers
          Suspensions.
             Replacing a Longcase suspension
          Winding keys
          Pendulums
          Mainsprings
             Mainpring length calculator
    Cleaning the dismantled movement
       Pegging out
    Lacquering
    Re-assembly
    Lubrication
    Re-assembling and Setting up
    Setting up
       Siting
    Regulation
    Tips, Hints & Helps
       Bluing
       Silver soldering
       Soft soldering
       Dial Silvering
       Splicing 30 hour rope
       Black Marble or slate cases
       Train count table
       Quartz Movements